The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support STM Tuned

BEP HX35 bolt on housing?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

93_tsi_fwd

15+ Year Contributor
2,625
16
Dec 20, 2006
San Jose, California
Can anyone tell if this is a holset hx35 or hx40 bolt on housing?

You must be logged in to view this image or video.

You must be logged in to view this image or video.
 
Bullseye Power HX40 DSM Turbine Housing
Bullseye Power HX35 DSM Turbine Housing
would they both fit in it? these two look identical but they say ones for a 40 and the other for a 35...????

but this one says you have to choose so maybe its not all the same
http://www.sandrperformance.com/Bullseye-Power-HX-T3-Turbine-Housing_p_423.html

or you can measure the bep housing...
The HX35 has two rings in a shape of a step. It measures

Outer ring 81.88 mm
Inner ring 80.94 mm

The BEP has the same step shape. It measures

Outer ring 80.56mm
Inner ring 74.86 mm
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top