The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Kiggly Racing
Please Support STM Tuned

Awdmonster drag car

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Last weekend I got the opportunity to finish the paint job lots of work but finally got it done

The next order of business is getting the motor back from the machine shop
 

Attachments

  • image.jpg
    image.jpg
    287.1 KB · Views: 375
  • image.jpg
    image.jpg
    221.3 KB · Views: 345
  • image.jpg
    image.jpg
    212.5 KB · Views: 366
Update: since the engine was out decided to remplace all the old bushings and tie rods and give the subframe a deep cleaning
The hardness is pretty much done still need to test it
Next in line is getting my flywheel resurfaced install a 12 tooth kiggly trigger plate setup put the motor and Trans in the car ...


Almost there ...
 

Attachments

  • image.jpeg
    image.jpeg
    195.7 KB · Views: 298
  • image.jpeg
    image.jpeg
    340.6 KB · Views: 308
  • image.jpeg
    image.jpeg
    257.2 KB · Views: 292
  • image.jpeg
    image.jpeg
    259.4 KB · Views: 287
  • image.jpeg
    image.jpeg
    286.4 KB · Views: 293
  • image.jpeg
    image.jpeg
    342.5 KB · Views: 289
I maneged to get some help from my friends after a few things I needed to install got the kiggly 12 tooth in
Oem timing belt new COP
And dropped the engine in to the car

Found out I need to get a sub hardness for my fail safes for infinity getting pretty close to a runing car
 

Attachments

  • image.jpeg
    image.jpeg
    236.8 KB · Views: 316
  • image.jpeg
    image.jpeg
    147.8 KB · Views: 305
  • image.jpeg
    image.jpeg
    431.2 KB · Views: 307
  • image.jpeg
    image.jpeg
    319.5 KB · Views: 285
update: I removed the dash but I can't make up my mind if I should keep the dash or remove it. I would like to see more 1g race car ideas if anyone has any they will be apressiated.

Also got me a 2g speed sencor forgot to work for aem. Fixed my radiator brakets
Made a dandy mount for the aem
 
its been a while since ive posted I finally got a 10 pt cage on the car working on getting it certified by the nhra.
i will post pictures very soon tomorrow ill be working on the car posting more updates
 
Finally got the wiring harness for the infinity 508 took me long enough since we had to make changes and attention to detail is a must. I have a friend helping me he though this since my wiring skill are not all the way there. We are also making a aluminum dash
Soon I’ll post more pictures
 

Attachments

  • 1A78A514-20A1-40B8-9D0A-4E6CB843D532.jpeg
    1A78A514-20A1-40B8-9D0A-4E6CB843D532.jpeg
    493.4 KB · Views: 232
  • 1EE7103B-7BF0-4AA0-8DDC-8E48FFE20068.jpeg
    1EE7103B-7BF0-4AA0-8DDC-8E48FFE20068.jpeg
    481.7 KB · Views: 237
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top