GSR-VR
Proven Member
- 111
- 5
- Oct 7, 2012
-
Albuquerque,
New_Mexico
Before flaming me I searched but the post wasn't exactly clear in the answer so I'm asking again hoping for a better answer.
I have a 1G FWD Turbo 5spd Trans.
I have 1G AWD 5spd Axles with intermediate shaft.
It seems that the Axles go in just fine but I'm not entirly sure if it will work.
(a post on dsmtalk . com ) said that the spline count is the same but the diameter was ever so slightly different enough to strip the axle of its splines ( NO PROOF )
I do not have enough money for a LSD yet and I thought that having these shafts would help with traction under acceleration and deceleration.
Any input is greatly appreciated.
I have a 1G FWD Turbo 5spd Trans.
I have 1G AWD 5spd Axles with intermediate shaft.
It seems that the Axles go in just fine but I'm not entirly sure if it will work.
(a post on dsmtalk . com ) said that the spline count is the same but the diameter was ever so slightly different enough to strip the axle of its splines ( NO PROOF )
I do not have enough money for a LSD yet and I thought that having these shafts would help with traction under acceleration and deceleration.
Any input is greatly appreciated.