diamondude
20+ Year Contributor
- 85
- 0
- May 13, 2002
-
Long_IslandNY
Has anyone ever heard of an auto/stick {triptonic} conversion in a 1g?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
BMP Racing said:I have programmed a controller that allows me to push button shift the trans from the steering wheel. One button for upshifting and one for downshifting. Nothing new, there are others who had been doing it a couple of years before me. I have had this done for quite some time. In its current state it incorperates some failsafes and *should* have the capabilitys of decreasing the line pressure on the down shifts. Full line pressure shifting is pretty hardcore! I didn't get any testing done last year as I was driving a 3G FD RX7 TT. It was an extremely quick and fast car! It has been sold so I will be dusting off my DSM and hopefully get it out soon to finalize the project.
Brad
http://www.dsmtuners.com/gallery/showgallery.php?ppuser=1306&cat=500
BMP Racing said:I have programmed a controller that allows me to push button shift the trans from the steering wheel. One button for upshifting and one for downshifting. Nothing new, there are others who had been doing it a couple of years before me. I have had this done for quite some time. In its current state it incorperates some failsafes and *should* have the capabilitys of decreasing the line pressure on the down shifts. Full line pressure shifting is pretty hardcore! I didn't get any testing done last year as I was driving a 3G FD RX7 TT. It was an extremely quick and fast car! It has been sold so I will be dusting off my DSM and hopefully get it out soon to finalize the project.
Brad
http://www.dsmtuners.com/gallery/showgallery.php?ppuser=1306&cat=500
anoldsman said:Brad,
I am thinking of doing the same thing but still using a floor mounted shift arm. Would you be willing to sell a unit for my car?
Thanks,
Chris
BMP Racing said:I am still using the gear shifter for P-R-N-D. All the controller does is control the forward shifting. Are you wanting to shift on command from the stock lever only?
Brad
x camaro owner said:hey other electrical engineer it sounds pretty basic to me, he did some research on the signals, tapped in wrote some short code. used a few i/o's and delay function.
also were you that kid in college always trying to get my source code for the microcontroller labs
diamondude said:I was driving a friends spyder with an autostick it was nice because you can 'drive' it when the roads are open then just click it to auto when you hit traffic....I was just curiuos if the option was available.