The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support Fuel Injector Clinic

Arp head studs questions

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

microgalant

15+ Year Contributor
112
0
Aug 27, 2006
Aruba, South_America
I have arp head studs, my questions is how manytimes can you use them?
I mean how many times can you taka them off and retorque them?
 
You can reuse them. How many times depends on how much beating they have taken. You have to check with a straightedge and see if they have stretched. If they did, they're no good. If not, you can reuse them. Also, any threads damaged or cross threaded is no good either.
 
For the most part they are re-usable. With that said, the studs should be measured for stretch.

I use a dial-caliper before I put the studs in. When I tear the motor down I re-measure the studs and compare the readings, with the readings, before I put them in.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top