2G Are these wheels ok? Hubs not flush

[Echosyp]

I already know, better safe than sorry story. Just wondering if this would be ok.

bought a set of Enkei RPF1s off Facebook yesterday, they are 5x114.3

fronts are 17x7 +45
Rears are 17x9.5 +35

They fit great on the car, fronts look a little small at stock height, but they are ok.

my question is, the center hubs do not fit all the way flush up to the rim, but they are up in the center of the rim.


Front

You must be logged in to view this image or video.

You must be logged in to view this image or video.

Rear

You must be logged in to view this image or video.

is this a guarantee failure or will it be ok?

 

[agentorange313]

the center bore of DSM/Mitsus 5 lug are 67.1mm
the center bore of the RPF1 is 73mm

You will need hubcentric rings to make then fit correctly. I just put a set on my EVO, well attempted to, the 16" RPF1s don't fit around the caliper.

 

[Echosyp]

the center bore of DSM/Mitsus 5 lug are 67.1mm
the center bore of the RPF1 is 73mm

You will need hubcentric rings to make then fit correctly. I just put a set on my EVO, well attempted to, the 16" RPF1s don't fit around the caliper.

will they be ok for right now until I order the rings?

 

[agentorange313]

will they be ok for right now until I order the rings?

Yes it will be "okay", do I recommend driving on them, I do not. I recommend getting hubcentric rings before driving the vehicle. Safety first