ASPTech1
Probationary Member
- 5
- 0
- May 11, 2013
-
Jacksonville,
Florida
I'm looking to sell these items around Jacksonville to avoid shipping.
Machine work done by experienced machine shop in New Jersey.
1990 4g63 engine block:
-bored 0.020" over
-balance shaft oiling holes set for eliminating shaft
-surface decked
-checked for cracks
-new freeze plugs
-hot tanked
-crankshaft cut and polished 0.25mm
-matching main and rod bearings included
1g cylinder head:
-surface decked
-new viton valve stem seals
-spring and valves installed
-vacuum checked for valve sealing
-cleaned and ready for install
1g black cover CAS
-purchased from onGreen Performance
-includes wire lead with connector
used 1g oil pan
1g water neck
1g oil filter housing
used 2g transfer case (1996 eagle talon)
I winded up going with an ATK 2g rebuild when my original engine with 205k miles walked its crank, .
Also considering to sell my 1996 Eagle Talon AWD..
PM me if you're interested.
Thanks
Machine work done by experienced machine shop in New Jersey.
1990 4g63 engine block:
-bored 0.020" over
-balance shaft oiling holes set for eliminating shaft
-surface decked
-checked for cracks
-new freeze plugs
-hot tanked
-crankshaft cut and polished 0.25mm
-matching main and rod bearings included
1g cylinder head:
-surface decked
-new viton valve stem seals
-spring and valves installed
-vacuum checked for valve sealing
-cleaned and ready for install
1g black cover CAS
-purchased from onGreen Performance
-includes wire lead with connector
used 1g oil pan
1g water neck
1g oil filter housing
used 2g transfer case (1996 eagle talon)
I winded up going with an ATK 2g rebuild when my original engine with 205k miles walked its crank, .
Also considering to sell my 1996 Eagle Talon AWD..
PM me if you're interested.
Thanks
Last edited: