AllenTallen
Proven Member
- 31
- 21
- Oct 3, 2020
-
Houston,
Texas
Hey what’s up guys. Hope all it well. I just purchased the FP green for my 1990 TSI. I can’t get the OEM coolant return line to fit so I’m going to run a 6AN line from the turbo to the water pipe (the pipe connected to the water pump)
Everything I need just came it but what confuses me is that the 6an to m16x1.5 and the 6an to m14x1.5 adapters for both fittings have washers & o rings on the metric side. Should I use the o-rings or washers? Thanks for any input. I attached pictures below or the stock set up and my fittings where they are suppose to go to replace the OEM line.
Everything I need just came it but what confuses me is that the 6an to m16x1.5 and the 6an to m14x1.5 adapters for both fittings have washers & o rings on the metric side. Should I use the o-rings or washers? Thanks for any input. I attached pictures below or the stock set up and my fittings where they are suppose to go to replace the OEM line.