The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Aftermarket E-Brake (Possible?)

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

dreamzturbogsx

20+ Year Contributor
48
0
Nov 8, 2002
Macon,
Would it be possible/very hard to install somthing like this. If it is what would it take to put it on b/c the stock cover is all one piece

You must be logged in to view this image or video.
 
Yes, it's possible. A good number of people have done it and I'm just waiting on my boot to come in before I do mine. Just cut off part of the stock handle, like cut and peel the rubber off. Install the handle with its adaptor for the eclipse and the boot, and you're done ;). That's not a custom install or anything either, that's the way its meant to be done.
 
there is an adapter?? I made my own what I did was take my stock ebrake handle and just cut the very top piece of it off and slid it inside of the ebrake handle its self and wah la :)
 

Attachments

You must be registered for see attachments list
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Build Thread Updates

Latest Classifieds

Back
Top