The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support Rix Racing

ac tensioner pulley

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

WytChoclitJ

10+ Year Contributor
48
0
Aug 29, 2009
Stone Mountain, Georgia
When doing a 1g block/2g head swap do you use the 1g or the 2g ac tensioner pulley?
 
I would imagine that the distance between cams on the head's are the same. But if your using a 1g block use a 1g belt, and if using a 2g block a 2g belt. As the AC belt only runs off pulleys from the block not the head.
 
You have to use the 6 bolt tensioner because everything for that is on the block its self. Unless you could switch the AC bracket to a 2g and then use that tensioner. BUT they might be the same?
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top