The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Kiggly Racing
Please Support Rix Racing

A couple new parts from Boosted Fabrication

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Boosted Fabrication

Supporting Vendor
8
53
May 29, 2018
Charleroi, Pennsylvania
We've been hard at work as always coming out with new parts.

For the 1G we finally finished up the long awaited "2G auto trans in a 1G" bolt in kit. This kit is a 2 piece design since the 2G trans with a Kiggly spacer is so close to the frame rail. The kit keeps the OEM look of things better than our previous design.
You must be logged in to view this image or video.
You must be logged in to view this image or video.

https://www.boostedfabrication.com/...ducts/2g-auto-trans-in-a-1g-mount-and-bracket

For the 2G we have re created the rear bumper upper and lower retainers for those that choose to still run retainers. These are made of stainless steel and will never rust!
You must be logged in to view this image or video.
You must be logged in to view this image or video.

https://www.boostedfabrication.com/collections/2g-dsm/products/2g-rear-upper-bumper-retainers-1
https://www.boostedfabrication.com/collections/2g-dsm/products/2g-rear-bumper-retainers

Coming soon we'll also have the 2G front retainers that bolt under the bumper to the fender. We've been getting a lot of requests about those retainers and they should be here very soon!
 
Last edited:
How about those bumper parts for 1ga? My rear ones are rusting out: one of the few parts on my car that are. The steel reinforcing bracket that holds the gsx chin spoiler is also rusting, but has also taken some impacts that have left it wavy. I’d buy som SS replacements for those in an instant!
Thanks for listening-
 
How about those bumper parts for 1ga? My rear ones are rusting out: one of the few parts on my car that are. The steel reinforcing bracket that holds the gsx chin spoiler is also rusting, but has also taken some impacts that have left it wavy. I’d buy som SS replacements for those in an instant!
Thanks for listening-
We already offer the 1GA lower retainers.
https://www.boostedfabrication.com/collections/1g-dsm/products/1g-dsm-rear-bumper-retainer

we will be working on the upper sandwich retainers soon also.
 
Made a order with boosted fab. The expirience was fantastic. They made some parts for me that i couldnt find. Like the auto trans mount lower bracket. Awesome customer service. Just waiting for them to arrive.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top