The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support Morrison Fabrication

6 bolt swap into 2g

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

beth44

Probationary Member
1
0
Jan 27, 2007
Wildomar, California
Hello i have a 97 gst with k&n intake and 2.5 inch turbo back. Im in the process of dropping and have the CAS black and green top, tb,oil filter housing, flywheel, thrm housing, water pipe, intake, oil cooler, ignition coil, oil pan and all the 2g parts i need. pleae double check my list and tell me if anything is missing? Also im going to be running a 1g non turbo throttle body and dont know where to find an elbow to connect it with? or could i use my 2g?
 
from that list it looks like your planing on using a 1g head-
the point of running a 1g NT t/b is that it does not have a elbow. you can clamp a silicone coupler right to the t/b. You can buy silicone 90/45/etc deg bends all over the place.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top