The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support STM Tuned

Resolved 6 bolt block freeze plug size???

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Status
Not open for further replies.
35mm, make sure you use brass if you order anything other than oem. I've always had troubles with the steel plugs so i use the brass with brown permatex.

what makes the brass ones better? I actually used a steel one, and i used some kind of indian gasket maker. Made by permatex..

And the only reason i used the steel one was all the others were steel. I had a issue where 1 blew out. But i would like to use these brass ones, i am just curious why they are better? And who sells them?
 
My machine shop installed steel ones with a paste sealer on the mating surface. I'll be really surprised if one leaks, i was there when the owner installed them in my block and it took a good pounding to get them in.
 
what makes the brass ones better? I actually used a steel one, and i used some kind of indian gasket maker. Made by permatex..

And the only reason i used the steel one was all the others were steel. I had a issue where 1 blew out. But i would like to use these brass ones, i am just curious why they are better? And who sells them?
I think I can help with that I'll check on my basement I have a brand new set going into my car soon my says 35mm

You must be logged in to view this image or video.


You must be logged in to view this image or video.
 
Last edited:
Status
Not open for further replies.
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top