The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Fuel Injector Clinic
Please Support Morrison Fabrication

3" Flow & Go with stock" Show and Slow!!!!!!!!!!!!!!!!!!

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

I said I'd make a write-up so.... Here ya go

So you want 3" exhaust power/sound/spool up!?!?!?! But whats that? You don't want a loud drone noise on the highway, drilling into your brain and ruining the speaker GAIN!!?? Well folks you now have a choice!!!

tools

-welder
-goggles
-welder goggles
-long shirt
-long pants
-a jack
-jack stands
-know how to take stock/existing exhaust off
-know how to weld
-know how to pay someone to weld
-a car
-ears that are tired of bleeding
-blood you are willing to loose



Step 1: Take off your big muffler that flows amazingly...loud

You must be logged in to view this image or video.


Step 2: CUT THAT CRAP OFF

You must be logged in to view this image or video.


Step3: Get stock muffler and hopefully some stock piping

You must be logged in to view this image or video.

You must be logged in to view this image or video.


Step 4: Weld it together at several pie cuts angling toward the location of the cutout



You must be logged in to view this image or video.


You must be logged in to view this image or video.




Step 5: weld the 3" cutout back on the 3" catback you cut from, and reattach

You must be logged in to view this image or video.


Step 6: marvel at the simplicity of an OEM manufactured part fitting into place perfectly... like it was..... meant... to ....be .... THERE!!!!??!

You must be logged in to view this image or video.


You must be logged in to view this image or video.



Step 7: Take a ride go WOT with the cutout closed...Pretty slow hu :(... Now open the cutout.... Open window if nausea ensues.




The cutout is fairly unknown to the import scene. It seems everything I see it on is trucks or modern muscle... Well START ORDERING!

Raceland Stainless Exhaust Electric Cutout Bypass with Remote 3"


Pros
-faster
-sounds amazing open
-quiet as hell through very restrictive stock muffler
-with closed, prevents any boost creep at all so set boost as low as you want!
-open=FAST SPOOL!

Cons
-closed=slow spool
-work
-lazy
-uhhhhh
-physical labor
-thinking
-time
-Food?
 
Last edited by a moderator:
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top