EC17PSE
Freelancer
- 5,871
- 3,450
- Nov 1, 2008
-
London, UK,
Europe
Hey all, so I have finally got around to installing V3 after it sitting on my shelf for countless years! i know!! i dont know why i left it for this long.
im in need of some help since the ecmlink videos are now not working thanks for flash player being the issue im not finding the info as easy as it once was and i dont know why.
so today i did the basic setup of TB adjust for slop. setup TPS to 0.63v and set WOT up from 0-100% and its all good, i was 1% out from fully closed so im happy it was that close to begin with..
then i went into the other settings and inverted CAS as im a 97. then the issues no arise! this is mainly the SD section im having issues with as nothing is listed in one page or thread and its all over the place and some stuff does not match what im seeing so im struggling to get basics right currently!
im using the ecmtning harness from the oem maf to the sensors and i cannot figure out what output thats from as i found it online saying two placements one being intake temp and the other baro! i have done both to see what happens but when i try to put it into the log capture the selected items are ghosted out and not showing when everything else is?
also im having a hard timing with inj voltage as i cannot find the data online and i have done the math to my best which sucks and even copying others online im getting a different result then their maths?
i set the global and dead times using the calculator which seems to be correct as far as i know.
i am not going to start this car till i know im getting the basics 100% right from the get go. is there any one place to go and find this info out as basic as it is, im not liking using multiple videos and threads that seems to contradict each other all the time! the ecmtuning videos may not of been the best going but they was quite alot more helpful for basics and good info.
im in need of some help since the ecmlink videos are now not working thanks for flash player being the issue im not finding the info as easy as it once was and i dont know why.
so today i did the basic setup of TB adjust for slop. setup TPS to 0.63v and set WOT up from 0-100% and its all good, i was 1% out from fully closed so im happy it was that close to begin with..
then i went into the other settings and inverted CAS as im a 97. then the issues no arise! this is mainly the SD section im having issues with as nothing is listed in one page or thread and its all over the place and some stuff does not match what im seeing so im struggling to get basics right currently!
im using the ecmtning harness from the oem maf to the sensors and i cannot figure out what output thats from as i found it online saying two placements one being intake temp and the other baro! i have done both to see what happens but when i try to put it into the log capture the selected items are ghosted out and not showing when everything else is?
also im having a hard timing with inj voltage as i cannot find the data online and i have done the math to my best which sucks and even copying others online im getting a different result then their maths?
i set the global and dead times using the calculator which seems to be correct as far as i know.
i am not going to start this car till i know im getting the basics 100% right from the get go. is there any one place to go and find this info out as basic as it is, im not liking using multiple videos and threads that seems to contradict each other all the time! the ecmtuning videos may not of been the best going but they was quite alot more helpful for basics and good info.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.