This applies to both AWD & FWD, M/T & A/T (97+ A/T uses MF140271 for the "U" bolt). Thread pitch are all 1.25mm.
*Thanks to @802 Garage for noticing the error in the U bolt part number. Correct number now shown.
- V (MF140471) : M10 x 65mm
- U (MF140266) x 2 : M10 x 40mm
- Y (MD740892) : M10 x 43.5mm
- Q (MD706012) : M8 x 60mm
- The Q bolt (red arrow) is the only bolt that goes in from the block side and threads into the transmission.
- There should be hollow dowel pins(MD020260) at V Q where the bolt goes through to align the block and transmission.
- The U bolt above V is not used when you swap a 6bolt block to your 2G tranny.
*Thanks to @802 Garage for noticing the error in the U bolt part number. Correct number now shown.
Attachments
Last edited by a moderator: