The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support ExtremePSI

2G DSM 3D Printed Front Bumper Cold Air Ducting

turbosax2

Moderator
4,408
424
Nov 19, 2006
Mechanicsburg, Pennsylvania
How is it supposed to fit with the fender liner? It hits well before the holes line up.

You must be logged in to view this image or video.
You must be logged in to view this image or video.
 

Eclipse 1998

Proven Member
241
31
Jul 21, 2010
,, Indiana
I'm about to order a set of these for my wife's 2gb eclipse. I'll test fit them to my 2gb Talon bumper first to see if they work as is. If they do, I'll snag a 2nd set so I don't have to remove the high beam on the passenger headlight for a ram intake, nice product.

Have you had a chance to test fit on the 2gb talon?
 

turbosax2

Moderator
4,408
424
Nov 19, 2006
Mechanicsburg, Pennsylvania
It's a bit tight, but it should clear the fender liner without problems.

Thanks for the reply. I did manage to get it to fit after unbolting the front two screws on the fender liner. When reassembled, it does push the fender liner back some but I'm still able to connect it to the bumper.

Here are some pictures of my install. My bumper is all quick release and I didn't want to ruin that. Luckily, the clamp for the duct ended up right next to the clamp on my intercooler pipe, so I welded two hose clamps together for mounting so it doesn't attach to the bumper at all. The hose used is McMaster 5499K246.

You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
 

AgntorangeDSM

Proven Member
280
8
Oct 31, 2005
Sioux Falls, South_Dakota
Thanks for the reply. I did manage to get it to fit after unbolting the front two screws on the fender liner. When reassembled, it does push the fender liner back some but I'm still able to connect it to the bumper.

Here are some pictures of my install. My bumper is all quick release and I didn't want to ruin that. Luckily, the clamp for the duct ended up right next to the clamp on my intercooler pipe, so I welded two hose clamps together for mounting so it doesn't attach to the bumper at all. The hose used is McMaster 5499K246.

how much hose did you end up needing? Is 2ft sufficient enough without stretching it?
 

Gsx-Dude

Freelancer
172
270
Jul 7, 2015
Germany, Europe
Thanks for the reply. I did manage to get it to fit after unbolting the front two screws on the fender liner. When reassembled, it does push the fender liner back some but I'm still able to connect it to the bumper.

Here are some pictures of my install. My bumper is all quick release and I didn't want to ruin that. Luckily, the clamp for the duct ended up right next to the clamp on my intercooler pipe, so I welded two hose clamps together for mounting so it doesn't attach to the bumper at all. The hose used is McMaster 5499K246.

You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.

Thanks for your input. That's a really good idea!
 

turbosax2

Moderator
4,408
424
Nov 19, 2006
Mechanicsburg, Pennsylvania

I purchased two feet and ended up using about 14-15". I intentionally bunched up a couple of inches so it has some play.
 

jed344

Supporting VIP
1,175
277
Jan 10, 2008
Waterville, Iowa
Where do i purchase this at! Need one for both sides, looks like i could use driver side lower to help direct air at my oil cooler.
 

scotthidley

Probationary Member
152
11
Nov 7, 2004
Cleveland, Ohio
These could make for great brake cooling ducts if you printed one for each side.
 

crispyimmy

Probationary Member
11
7
Feb 24, 2021
Toronto, ON_Canada
That's awesome, I'm in Canada but I was wondering if you'd be willing to send me the .stls for these? If I'm able to print them then I'd be down to make a video on them and can link to you if you're still selling them

My youtube is crispyimmy if you're curious
 

shadow99

Probationary Member
7
2
Sep 21, 2009
chicago, Illinois
I recently recieved my order of the new version for the 2gb. These things look awesome and Im excited to fit them on when its warmer outside.
 

Gsx-Dude

Freelancer
172
270
Jul 7, 2015
Germany, Europe
Yes they're still available.
I also managed to make a 2nd version of those bumper ducts which are held in place only by clips now.

You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.



Available at: www.dudes-custom-parts.com
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned VR Speed Factory

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Top