The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Rix Racing
Please Support Rix Racing

2g BSE install

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Aproductions

10+ Year Contributor
2,124
50
Aug 11, 2009
Allentown, Pennsylvania
It looks like the stubby shafts are the same (OEM type). Also, the bearings are going to go where the original shafts were to block the oil passage. The front round "washer" or block off plug, blocks oil from leaving the oil pump passage on the front cover (sometimes people use a freeze plug). Hope that helps.

http://vfaq.com/mods/balance-shafts.html
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top