nitrokid
10+ Year Contributor
- 78
- 0
- Jan 23, 2009
-
lincolnton,
North_Carolina
Ok let me start off by saying that I'm building a n/a 420a. More than likely its going to be 10:5.1 compression. Having said this I'm going to need to get up to the higher rpm's to make my maximum power out of this platform. I've been looking at the 2.7 rockers and the pt cruiser rockers. I was wanting to know if there is really any other advantage of using the 2.7 over the pt cruiser rocker other than the oil hole positioning. So bascially is there any strength difference over one than the other and anything like that. Any input would be great. Thanks.