The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support Morrison Fabrication

1G 2.0 control arm swap

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

tarmacfriendly

Probationary Member
5
0
Mar 21, 2017
Fontana, Kansas
When my DSM was going through a much needed suspension rehabilitation I accidentally purchased the incorrect control arms for my 1.8. They are almost on the dot an inch shorter thus pushing my camber outwards. I used camber bolts to fix this problem. And welded my old a arm sway tabs onto the new control arms. I shortened the front ends width roughly 2 inches with this mod and has so far road well. No rubbing at full lock. Does anyone see any problems with this swap?
 
Some pics to claify this would be helpful, always best to show us then tell us
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top