The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support ExtremePSI

1G radio wiring diagram help

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

wcain143

Probationary Member
2
0
Nov 1, 2005
indianapolis, Indiana
I just bought a 94 eclipse gs that had an aftermarket radio in it. 2 days ago, someone broke in and stole the radio and cut the wires before the harness so now all I have is a jumble of wires. I pulled a vfaq on a gen 1 but am still a little stumped on some of the wires. I have all the speaker wires separated now and only have a white/black wire which I am assuming is the power antenna, a green/white wire that is possibly the + illumination wire, a black/yellow wire that is possibly the ignition switch + (possibly all time hot), a blue wire that is ACC, and a mysterious red/black wire. I have no idea where the negative wire is. Any help would be absolutely appreciated. Also they took the housing around the radio I can't remember if it was a part of the original car of if it was part of the aftermarket radio plastic.

Thanks.
 
Radio 12v red/black +
Radio Ground (chassis) (aka there is no ground wire make your own)
Radio Ignition blue +
Radio Illumination green/white +
Factory Amp Turn-on N/A
Power Antenna white/black +
LF Speaker +/- white/blue - black/blue +,-
RF Speaker +/- white/red - black/red +,-
LR Speaker +/- yellow/blue - gray/blue +,-
RR Speaker +/- yellow/red - gray/red +,-

Usally when someone cuts the wires they pop the fuses so be sure to check them

and this is for a 1g eclipse only.
 
VegasTSI said:
Radio 12v red/black +
Radio Ground (chassis) (aka there is no ground wire make your own)
Radio Ignition blue +
Radio Illumination green/white +
Factory Amp Turn-on N/A
Power Antenna white/black +
LF Speaker +/- white/blue - black/blue +,-
RF Speaker +/- white/red - black/red +,-
LR Speaker +/- yellow/blue - gray/blue +,-
RR Speaker +/- yellow/red - gray/red +,-

Usally when someone cuts the wires they pop the fuses so be sure to check them

and this is for a 1g eclipse only.


Thanks for your help! hopefully will have a radio in this evening!
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top