Lancer_lover
Proven Member
- 165
- 32
- Apr 18, 2017
-
kristianstad,
Europe
I just wonder if this a copper gasket that sits around this thing? In the middle that looks like an bolt?
You must be logged in to view this image or video.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Are you asking if this requires a gasket/washer? Then, no it doesn't require any washer or gasket.You must be logged in to view this image or video.
No, you don't need it. If you have a crush washer there, it is probably by mistake. If you put a crush washer, it would technically cause more leak since this seals at the bottom of thread part (where it is stepped) in the pic attached, that's why there is a space between the housing and the bypass valve. So, do not over tighten until the bottom, it seals good even you see a space.I just took mine apart. I could swear there is a crush washer on that end bolt. I don’t have my ASA/FSM nearby to confirm
No, you don't need it. If you have a crush washer there, it is probably by mistake. If you put a crush washer, it would technically cause more leak since this seals at the bottom of thread part (where it is stepped) in the pic attached, that's why there is a space between the housing and the bypass valve. So, do not over tighten until the bottom, it seals good even you see a space.
It is not terrible it is bought from mitsubishi chop itbis just left over around itThat’s that terrible orange rtv that wasn’t sealing anything around that oil pan.
The oil pan i not leaking that gasket is just left over. And yes the green one in The middle is what i was wondering about it has oil on it and just from that place? Oilpan is tight and no leaks
It is not terrible it is bought from mitsubishi chop itbis just left over around it