Steven A Schiltz
Proven Member
- 39
- 1
- Apr 13, 2019
-
Memphis,
Tennessee
Kinda having an issue with my ignition timing when I try to set it on the logger it shows 13 degrees when the engine is close to five and vise versa when I move it. It has a 92 green top cas and the previous owner did his own wire tuck and from what I seen there is no crank plug at all it's all run off the 4 pin plug. I'm running a 98 black box ecu. And have a tactrix plug and ecu flash. Everything looks like it's in the 2g factory spots as in the wires. My question is do I need to swap some pins around on the cas, ecu, or do I need to tune it?