Sjd6795
Proven Member
- 614
- 121
- May 14, 2014
-
Wilsonville,
Oregon
Sjd6795 submitted a new DSM Profile :
1997 Eclipse GSX 2.3L Stroker
Read more about this vehicle here...
1997 Eclipse GSX 2.3L Stroker
Read more about this vehicle here...
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Extra parts that will eventually be installed. I have 90% tan interior pieces and original wheels. Previous owner swapped to all black interior pieces for the most part.
3D printed myself a cigarette lighter plug as well as a shift knob haha. Also off with the old on with the new! FP manifold is now installed, I need to figure out a heat shield for it though. Also FP intake going on later today when my silicone coupler arrives!
New Ferrea 6000 Valves with Blue viton seals, new BC 268/272 cams, new waterpump, new radiator, new belts, all new timing components, new sparkplugs, new gaskest and seals everywhere, some new water/vacuum lines, helicoil exhaust manifold stud, fresh fluids, and electric fuel pressure gauge install.
Current things done to the car are black box ECU openport 2.0 tuning, 2.3l wiseco 1400 HD piston, FP exhaust manifold, FP turbo intake, FMIC, Delphi 680cc injectors, walbro rewired 190lph fuel pump, Small 16g turbo, and probably more that I'm missing.