The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support ExtremePSI

1992 Plymouth Laser RS AWD

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

GSLENK

10+ Year Contributor
1,416
51
May 25, 2011
DC, Maryland

Attachments

  • Front corner.jpg
    Front corner.jpg
    278.6 KB · Views: 87
  • Front.jpg
    Front.jpg
    409.2 KB · Views: 91
  • IMAG0133.jpg
    IMAG0133.jpg
    229.1 KB · Views: 78
  • IMAG0134 (2).jpg
    IMAG0134 (2).jpg
    286.6 KB · Views: 76
  • IMAG0144.jpg
    IMAG0144.jpg
    325.3 KB · Views: 101
  • Low miles.jpg
    Low miles.jpg
    209 KB · Views: 70
  • Rear corner.jpg
    Rear corner.jpg
    282 KB · Views: 86
  • Rear.jpg
    Rear.jpg
    376.7 KB · Views: 87
Last edited:
First round of Mods:
LC-1 WB
Boost gauge
ECMLink v3 lite
Everything else stock
Raising boost would make the OEM clutch to slip a little (blame shoddy resurface job by a Chrysler dealer in ~1996)

Second round:
20g
FP race manifold Coated with VHT ceramic spray can.
Fuel: AFPR, Filter, AN lines, Fuel rail, Walbro 255 rewired.
FMIC: Punishment racing. Substitute NGR BOV.
Converted to speed density, ditched MAF
Clutch: ACT 2600PP, ACT streetlite flywheel, Southbend kevlar sprung street disk
3" Thermal RD exhaust. Ebay stainless 3"downpipe
Meth injection. Pure methanol.

Third Round:
Carbon Fiber hood
-10an VC crank case ventilation, Calan Can.
HID clear lens projector retrofit, with ricey LEDs (way over did this, still haven't used the LEDs to this day)
FMIC upgrade: ETS 3 inch thick race (tall) core. Swapped to higher grade couplers, and all 100% stainless HPS T-bolt clamps. T-Bolt's were shortened a little for cosmetics.
Custom coolant overflow tank, mounted on top of transmission tucked under TB elbow area

Fourth Round:
FP red
Front-line Fab Billet Valvecover
AEM 320 E85 fuel pump
GM Ethanol content sensor
Flex fuel tune
Ditched Meth injection all together.
Massive Air filter, 4" pipe to turbo.
Ditched firewall pad. Leaned out wire harness. Dropped harness lower. Fake tuck.

Fifth Round:
TiAL 50mm BOV
 
Last edited:
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top