Janesfam
Proven Member
- 102
- 43
- Jul 9, 2021
-
Milwaukie,
Oregon
As I’m getting ready to finish up the 16g phase of my build, I’m reading a lot about needing a restrictor on the oil feed line to the turbo if I’m going from the filter housing. Nothing I have read gives a link or a size for any restrictor. My buddy is telling me to just remove the port and slap a 3/8bspt plug bolt and run a 1g feed line from the head.
this 16g phase should should only be on the car till after Xmas. And the fp green should be set up with the ofh port. So I guess what I’m asking is this.
what size restrictor should I use on the oil feed line running from the oil filter housing to the 16g turbo?
this 16g phase should should only be on the car till after Xmas. And the fp green should be set up with the ofh port. So I guess what I’m asking is this.
what size restrictor should I use on the oil feed line running from the oil filter housing to the 16g turbo?
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.