My hp goals are between 450-500 at the crank. I have heard different people running 660's and making 400 whp. I don't know how true that is but I just want to size an injector for that turbo or maybe if I want to go a little bigger turbo down the road(not in the near furture). Thanks for the info.
I did a little research on this subject. I am getting ready to buy fuel injectors. I really don't know what size injectors to get. My setup is a 2.3 liters stroker,fmic,walbro 255,to4b-vtrim,full 3" exhuast,avc-r boost controller,gm maf. I am getting ready to buy fpr and keydive chip so thats...
I am installing that this weekend on my car. I can't wait to see how it runs on my 2.3 stroker motor.I need a temp pipe from the air filter to the turbo, b/c i am still using my 1st gen maf until I buy my translator for my maf.
I have at o4b-vtrim turbo and I am getting ready to install it on 90 tsi awd and I have a gm maf in my intercooler piping but no translator. I need to use the 2 3/4 intake a temp solution until I buy a translator.Does anyone know how to make one or where I can buy a cheap one. I looked on ebay...
I just put a new motor in my car about 150 miles ago didn't leak. then my turbo took a crap and got oil through out my motor and exhaust/ic piping.thats what i was wondering since there is oil on the gasket it is not sealing correctly because when my o2 housing was leaking i took the gasket off...
tried to re-tighten the the nuts/bolts on the head there tight. they are not stripped so i will start with replacing the metal gasket on the manifold/head. thanks for the info
i just put a new turbo on my car b/c my other turbo took a crap. i hooked up everthing and i have an exhuast leak coming out of the manifold next to the head. i first had an exhaust leak out of the o2 housing fixed new gasket same as the turbo and bottom of the turbo manidfold. now it is leaking...