I did. Went ahed and bought a new fitting. But I was upset because the fitting was working as it should before removal... if its not one thing it’s another. The car started but I turbed it off to inspect the fuel line and when I go to turn it back on, it doesn’t...
Cant remember the brand but its a well known brand. This was in perfect working order until I took it off to replace my intake Manifold and when I put everything back there was the leak. Im sure it was not from the tread, but the thing was working perfectly fine up until I removed it. I dont...
Hello guys, I just finished installing my evoIII many and I used the same old but in good condition (before the swap) fuel line from my fuel regulator to fuel rail but now it leaks!!! Not from where it connects but from where the elbow and hose meet. My question is, do an fittings go bad?? It...
Have you checked your fuel system? Timing? Firing order? Spark plug gap? Mas air flow meter? If you could be a little bit more specific it would help us help you better. Welcome to the forums. Oh, YES, totally worth it. Every Penny! its not easy though, Good luck and dont get discouraged. DSM...
If you plan on driving the car mostly stock then yes. 2.5 is enough but if you plan to start modding in the future, I would suggest 3" and spend your money once.
Hey guys! Sorry to bring this threat back to life, But I have a question. Does the Fuel Pressure Solenoid need to be hooked up to a vacuum at all times? If so is there a diagram or how do I hook it up. Mine is connected to the plug but not to the hoses, and I have code P1105 among others that Im...
That doesn't sound too good man! Did the noise start when you replaced the wires? If so, try putting the old ones back may be you have defective new wires. New things do fail, sometimes. Its rare on wires but it does happen. Good luck to you man. I hope you can figure this one out.
Do you still have your old turbo? If you do put it back on, you shouldn't see any problems since your car was running fine with your evo3. I have the same problem with a 50 trim and bc272 but I think is my tune. 1st 2nd gear I build no boos at all. :(
I would also try to turn the crank manually, with wrench of course. just to rule out that the engine turns freely and isn't putting a ton of weigh on your starter.
Turbo charged aplications require an intercooler, weather air to air or water to air intercooler to lower the temperature of the amount of air that is being sucked in by the turbo. Colder air means more oxigen in the combustion chamber. Since the air is compressed it gets hot, with out the...
Im guessing you have a stock boost gauge? if you do, get an after market one, they are not that expensive. Just get a good boost source from your intake mani. if your boos levels are still fluctuating something might be wrong with your waste gate (corect me if im wrong) your psi should be set at...
tdykes1234 : before you start modding and upgrading BOV's do some searching and lots of reading. This site is awesome and can teach you lots of things but you have to search and read. good luck with your car,
I was going to say, get an intake pipe and you should be able to hear it scream. but you have one. I had a small 16g, ebay intake pipe and at 14 psi it was very loud, when I switched to my slowboy 50 trim and and 18 psi with a 4'' FP intake pipe it was pretty quiet, I thought it was going to...
Oh ok thanks alot!! I will look into all this. Thanks for your help!
Wht about valves, do you recomend upgrading them? What do you think about the head gasket?
Hey guys, I overheated my car:cry: and since the head is coming off Im looking to upgrade my springs, retainers and hopefully valves as well. I curently have 272 B.C cams, im just looking to see what people have used and what has worked best for ya'll. I am looking at the B.C springs and...
What he said ^^^. There is tons of information in this forums, just read and read, but watch out for those coments that say "you should buy this thing, thats wht I have, or thats wht Im going to get" read, learn whats good for your car and whats going to be good for you. Remember you already...
Hi guys I have a few questions that the search button has not been able to answer. I have a pair of vr4 calipers and i was wondering if I could use the brakets that RTM Racing sells? The one for the cobra rotors. The second question, is it true that rear evo calipers fit 2g gst with no...
If Im not mistaken, that controls the idle on the car, the screw does not have to be tight, but your idle does have to be like at 850-975 rpm at idle. Someone corect me if I'm wrong!!!
Thanks for all the coments guys, I dont think I will ever go with a difernt turbo or a bigger one on that car, the 50trim is internally gated but I do plan on squezing out every pound of boost I can, my goal is 350hp. I just wish FP had another sale!!! but then again, DONT WE ALL!! Keep the...
Hi guys Im trying to buy one of the this manis but I dont know wich one, can you guys give me a hand here?? Im going to be using a 50trim from slowboy, 750cc injectors, maf-t, safcII ported stock o2 housing and one of this manis, please no bs guys just
tell me your experiance if you are...
Hey guys I just bought the Sb50 trim turbo, and I am about to install it, my first question is, is there anything that I need to know before installation? Like if anybody on here installed their own 50 trim and just came across the same problem. My 2nd question is about the evo3 exhaust mani...
To answer your question you can safely run 11 to 14psi with that set up, I wouldn't run anything higher than that. You should really consider at least rewire fuel pump, 190 wally 550cc injectors, and safc, and then tune if you know what you're doing if not have someone that knows what they're...
Is this a good turbo? Is it legit? Has anybody seen for sale at a reputable dsm store?eBay Motors: Bullseye Power turbo for DSM Eclipse Talon Galant VR4 (item 200228028636 end time Jun-05-08 19:14:31 PDT)
Like the title says, what do I need to run this turbo on 1g awd?eBay Motors: Turbonetics t3/t4 ceramica ball bearing big shaft turbo (item 180245506983 end time May-26-08 18:04:21 PDT)
Hey guys whats going on, well like the title says, I dont think my profec b is working, I thought I had the boost controler set to 14 lbs, but sometimes when I hit the gas I hit fuel cut, and that just got annoying, last night I was doing some pulls just to set my controler right but boost...
Whats up, What I would do is put my old bov back in the car test drive it, if I still had the same problem I would do a boost leak test. My gues is that your greddy bov is bad, if your car was running right before you put it on I think there's your answer. Just my 2c.
She doesn't needa clutch bro, her gst is automatic. My sugestion to you GST girl is read, there's tons of info in this forums, read, read, read, and once you know how modding works it will be a lot easier to do it, and to use your best judgment, because I can tell you one thing and somebody...
Hey c4uldron could you give me the website where yo got the turbo from? Thanks for all the replys, I had an idea that making that much power with that turbo was going to be verry hard. thanks keep'em coming
Hey guys whats going on, I have a few questions about my fuel mods, I currently have a small 16g on my car with no fuel mods at 14 to 15 psi I am like a week or two away from buying injectors and a fuel pump the problem is that I will be getting a bigger turbo by the end of the year and I plan...