The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support RTM Racing
Please Support Morrison Fabrication

Search results for query: *

  1. Old style greddy turbo timer...

    If your ac stays running after the key is removed then it sounds like you tapped into an accesory wire and not an ignition. Not sure if that would cause your problem for the countdown though?
  2. Is this bad?

    Okay so how much to rebuild a big 16g?
  3. Is this bad?

    :talon: I was curious if I should rebuild or just keep going with this turbo. It looks like it inhaled something but spools fine and has no shaft play. Is this common or really bad? What should I do now?
  4. turbo bolt up question?

    :talon: You will need a 2g install kit to put this turbo on any 2g car with a t25 on it now.
  5. Installing New Stereo

    You need to bypass the factory amp I took out the amp and cut the large wire tested each one with a meter and found my speakers and ran that up behind the radio.
  6. Big 16G

    Okay I have the opportunity to buy a big16g with less than 1000 miles for 350.00. I was wondering what the best deal is for a 2g install kit. I am on a limited budget and don't want to spend more than I have to but I also want to make sure that it is done right. I would appreciate all the...
  7. Did seafoam do this?

    Well I drove the car to work this morning and I think the problem has less to do with seafoam. In first gear I get minor vibration but as I increase in speed I get more. I noticed that when I press the brakes I get a popping sound also. I will check this more when I get home but could this...
  8. Did seafoam do this?

    The blow off valve is the h and yes I do recirculate. I sucked it in through the bov line but should any come out at the downpipe even if I have a leak?
  9. Did seafoam do this?

    I just installed my intercooler pipes with my hks bov and I noticed no difference. I could hear my turbo spool but could bearly feel anything. I read on some of the forums and had been considering doing the seafoam to see if I could pick up anything. I did it this morning and while it was...
  10. Camber Question

    I finally lowered the Talon and now my rear camber is off. I was told that you could go to Home Depot and get a couple of bolts that will alllow you to fix the problem. Is this true and if so what do I get and how hard is it to do? Thanks in advance for any help that you can give. :talon:
  11. Best Laptop Setup

    Well for the computer side I would use the aem setup it comes with four preset programs with one of those being stock. You can tune this with any laptop that uses XP and they send you free updates every year. As for the donor good luck when my transmission broke my car was down for seven months...
  12. Synthetic Oil [merged]

    I would only run synthetic in any turbocharged application not because of a performance issue but more reliability. I have used mobile1 or amsoil in my car and have had no problems or gains for that matter. :talon:
  13. Tuning a TurboXs H34

    I would start out with four and then try three and see how it does.
  14. Tuning a TurboXs H34

    I also have three in mine and it seems to work fine I also have a mbc set at 15lbs.
  15. turbo question

    Ther is no cat and it is a enkei but the factory fit just fine
  16. turbo question

    I guess that I will have to take it and have three inches cut out but how do I tell if my turbo is the stock t25 setup or if the o2 housing is stock?
  17. turbo question

    Okay I just bought a new 3" downpipe to go with a catback that was installed by the previous owner. When I removed the factory and tried to bolt up the new one it was about 3-4 inches to long. The previous owner had replaced the motor and the turbo before I bought the car is it possible that I...
  18. general 2q question

    I can't really tell where it is coming from all I know is that I only feel it when I turn the controls on defrost and the ac lights up it doesn't do it on any other setting before defrost
  19. general 2q question

    I have a 97 tsi that has no ac. It has all the components but the compressor and dryer need to be replaced. There is no belt on the ac compressor. My question is that when I turn on the defrost I get a vibration that I can feel in the clutch and the brake. I have been told that when a engine is...
  20. In the market.. how do you feel about this color??/

    If intrested I have a 1997 Talon tsi awd white with grey leather.
  21. O2 housing

    I checked it out and that sounds cool. I think I'm gonna order one tomorrow. :talon:
  22. O2 housing

    Sounds cool so its loud all the time that I'm under boost or just at full boost. Does it hold the entire time that I'm at full boost.
  23. metal intake pipe question?

    Well I was coming home from work today and decided to really get into the boost and when I shifted my car died. I popped the hood only to find that my bov was sitting on top of my manifold. OOPS! I guess that wasn't so tight. After adjusting that it sounds much better. Go figure. :talon:
  24. O2 housing

    I'm going to buy a new o2 housing and I was thinking about buying one with a o2 dump. I did a search but can not find a decent vidoe that has good audio of what it sounds like. I've heard that they are extremely loud. Does anybody have any audio clips or opinions on the dump system. :talon:
  25. metal intake pipe question?

    I checked inside and it was clear and trust me I know. I'm going to work now so I'm gonna drive it and see how it does.
  26. metal intake pipe question?

    Yes the MAS is plugged back in and no the intake is atually quieter. The spool sound is much quieter with the new intake.
  27. metal intake pipe question?

    I am still recirculating and everything seems to be tight.
  28. metal intake pipe question?

    http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7910166468&rd=1&sspagename=STRK%3AMEWN%3AIT This is the link for the intake.
  29. metal intake pipe question?

    I just bought this aluminum intake on ebay and put it on my car today. It seems as though my car runs sluggish with it. I checked all the fitttings and everything seems to be tight. My autometer boost guage is maxing at 15 just as before but it seems slower and my blow-off valve is muck quieter...
  30. Boost creep?

    Cool Thanks I guess that would be better that the breather filter.
  31. Boost creep?

    Then why do all the post that I read say that I will have boost creep?And what about the filter can that be done or should I just get a oil catch can.
  32. Boost creep?

    Can I get an aftermarket wastegate that will keep up and that I can use on a upgraded turbo like an evoIII 16G and if so how much trouble is it to use one on a stock turbo?
  33. Boost creep?

    I just purchased a stainless steel 3 inch downpipe from Megan Racing. I got it shipped for 83.00. I've heard that I will suffer from boost creep is this true? I still have the stock turbo. What should I get to avoid boost creep, Waste gate? I was also wondering about removing the tube that goes...
  34. Boost Question

    I have an Autometer Lunar series guage. I'm not seeing any boost in first it reads zero. In second I have seen about 5 lbs. Third pulls great and makes up to 15lbs. I have no smoke the turbo and exhaust are pretty new less than 70,000 miles. I haven't noticed any spool up problems but I guess I...
  35. Boost Question

    I Didn't Watch It All The Way But The Most That I Saw Was Around Five Pounds. It Didn't Feel Like Much More Though.
  36. Boost Question

    Why Does My Car Not Make More That 5lbs Of Boost In First Gear. Is There A Way To Increase This Or Is Not Possible. My Car Does Not Seem To Make Much Boost In First Or Second, Third However It Makes Plenty. I Have A Manual Boost Controller With The Boost Set At 15psi On The Stock Turbo.
  37. Has anybody seen this?

    We looked in the transmission and could see nothing that would seem to come out. I just talked to someone that told me that Eagle was known to swap the drivers and passengers side. Does this sound right?
  38. Has anybody seen this?

    I dropped my Talon off last Monday to have the drivers side front cv axle replaced. I have ordered 5 axles which have all been wrong. The ones that I have ordered have male ends going into the transmission the one that came out has a female end. I cannot find the right one anywhere other that...
  39. Turbo Timer and alarm?

    It sounds like one of you acc wires is tagged wrong or the alarm is usually tied to a door trigger which works off the dome light. Check to see how long it takes for your interior lights to go off. Mine stay on while the tt is running. If that is the case then when the tt goes off and it takes...
  40. Turbo Timer and alarm?

    You might want to check where the antenna is installed. If the antenna is not installed in a good location like the front window then that will decrease the distance. Some installers are lazy and will stick it under the dash or under the headliner both of these will decrease range.
  41. Turbo Timer and alarm?

    Just so you know a TT can be wired up with relays to work with any alarm systems. I know because I manage a car audio and installation bay. If you need help let me know what alarm you have and what TT you have along with the vehicle year and model and I will send you the diagram...
  42. What is happening?

    Yeah this older man has his own shop and his guys do great work and they stand behind their work. Best part is that when he gives a price he does it for that price. No hidden charges.
  43. What is happening?

    Well I found out that it was a cv axle. The boot has ripped and had slung all the grease out of the top side. A local shop is going to put a new one in for 75.00 labor and a new axle from Napa was 95.00. I do appreciate the reply though.
  44. What is happening?

    I was driving home last night on the interstate and everything was fine. When I got off the interstate and started to slow down I noticed a vibration. When I came to a stop the vibration was still there but when I put the clutch in it went away. When I started off the car seemed to struggle and...
  45. Vac Line

    I HAVE A NIPPLE ON MY INTAKE THAT HAS NOTHING GOING TO IT. THE VAC. IS LEAKING UNLESS I PLUG THIS NIPPLE. IT IS LOCATED NEXT THE THROTTLE BODY BY THE THREE SMALL LINES. CAN SOMEBODY PLEASE TELL ME WHAT THIS LINE IS OR CAN SOMEBODY POST A CLOSE-UP PIC OF THEIR INTAKE. I POSTED THIS ON MACHV...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top