Hi guys im having problems with my front bumper . the paint on it is fine but for some reason the clear coat is flaking (peeling) off. Is there anything I can do to fix this without having to repaint it. Because the car shops here in ny are WAY to expensive. The least I found a shop that will...

Ok guys, Yesterday I started my first fiberglass project. I bought a set of audiobahn components for the front of my car. I didnt want to mess up the 3 inch stock speakers so i decided to make a tweeter enclosure in the top of my dash. im not done yet but im half way there. the speakers i...

ty for the advice, but the only reason I'm fixing my eclipse is because of all the dents on it. I hardly use it anyway. If i wanted a turbo dsm i would have just bought one. I would not spend thousands to turbo a non turbo car. It's funny how almost every post here ends in someone saying...

I have not done much with my dsm over the past year. It’s been sitting in my driveway getting older and older. But I get very depressed every time I look at it. So I’m looking to start fixing it up. My first step is to buy a body kit. I just wanted to know if anyone can recommend any good sites...

no mounts?

if u were to do all the body work yourself and u just wanted the outside of the car painted the same color (no door jams and such) how much would that cost?

all speaker levle's r set the same. but i didnt put the HU on. the owner before me did. so they had all 6 speakers connected. 2 in dash,2 in door, 2 in back.....i used the wire from the speaker in the door to connect my components. and i didnt want the ones in the dash hooked up, so i just cut...

ok guys i bought a whole new system for my car but i have a prob. i have these components in front. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=32818&item=5754861835&rd=1&ssPageName=WDVW . but for some reason they sound way softer than the rest of stuff in my car. can anyone tell me...

dude ur so lucky. a snow plow driver ####ed up the whole left side of my eclipse 3 days ago. and i didnt get shit got it cause i didnt see when it Happened. i just got up in the morning and saw my car all ####ed up. i wanted to cry....lol

i have the 5.5 hp 33 gallon husky compressor. its rated at 5.1 cfm at 90 psi. the one that homedepot sells.

well this is the gun i wanted to get http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=79702&item=4350990024&rd=1 . but its 13 cfm @ 10 psi. not sure if my compressor can do that.

sup guys, im looking for a hvlp gun for my air compressor but all the guns i look at say something like 5scfm @ 40 psi. and all sorts of different numbers like this at different psi's. my question is my compressor is rated at 5.1 scfm at 90 psi. how do i know how much cfm my compressor is at 40...

im looking for a right side door for my 97 eclipse. and i fond a talon one for a good price. so i just wanted to know if theres anything i can do to make this door look like my stock 1997 eclipse door? is there a trim i can pop out or something?......ty...

hey i seen this car on super street. in the readers ride section.

anyone know how i can find the cfm at 40 psi? i really need to know. i already bought the compressor and i cant find that info anywhere.

ok ive been looking for hvlp guns. but most of them give u the cfm for 40 psi. in the specs of the compressor i posted it only says the cfm of 90 psi. is there any way to know what the 40 psi is from the 90 psi numbers?

a few months ago i made a post asking about air compressors because i wanted to paint my own car. u guys told me i needed at least a 30 gallon. at that time u could not get them at a good price. but now homedepot has a 32 gallon one on sale. i just wanted to know if this one will be good to...

paint that bi*** asap

pic of the crack on my bumper

Hmmm melted back together? Can u explain how this is done? Ive had this car for about 6 months now and ever since I got it that crack has been sending me crazy. I try anything to get it fixed

really? i was told that fiberglass cant bond to urethane but could u tell me a little more about what u did? also do u have any pics?

as the title says i have a crack in my front stock bumper and i want to repair it. in a post before i was told that went cant use fiberglass cause out bumpers were made of urethane. so i just wanted to know if there is anything out there that can fix cracks on urethane?

i had the same EXACT speaker pod in my 1997 nt eclipse. there NOT 6.5 or 6.3/4. the speakers are 7". and i got some audiobahn 6x9's to try and make it fit. and let me tell u.. theres NO way in hell to make them fit unless i pound my wheelwell down about 1.5 inches. and theres no way in hell im...

i have one question. what kind of air compressor and paint gun did u use?...i am looking for tools to paint my own car right now. but not sure what kind of compressor to get. do u and a like to the compressor and pain gun u have?....ty

i installed MANY neons and for everyone that was inside the car i took the power from the radio.

i think audiodahn are really good. most of the people that say bad things about AB never owned AB subs. right now i have 2 audiobahn 12 inch flame q subs. i do not have a amp to connect them yet. but the reason i got the subs i did was because of my friend he had one of these subs in his car and...

mdf is the way 2 go. but i dont know about using screw's. because the shops here in ny charge alot of $$$$ to make these things and they all use nail gun's. if i was not going to use fiberglass for my subs i would go with 3/4 mdf.

u think that looks like shit?. its one of the best install kits ive seen for an eclipse. ill take a better pic and post it. then tell me what u think. and as far as the pocket i like it. i keep my cd's in there. easy to get to when im driving

why not just use the schosh one? thats the one i have in my car and i think it looks great. and it only cost around $10. heres a pic of my schosh. sorry for the bad pick didnt have a good digi cam back then. pic is about 5 months old.

ebay

my subs r not 400 rms. there 1100 rms each. but for now im only going to be running them at 400 rms each. and i did hear them there hella Loud. my friend has one of them connected to a 450 watt rms amp and that shit is MAD loud. he blows most of the cars around here out. and thats just one. i...

hi i have a pair audiobahn AW1206T that i want to install in my car ( http://www.cardomain.com/item/ABNAW1206T ) and now im looking for a amp. right now i only want one amp. that can push around 400 rms to each sub. so i was thinking of getting this VOLFENHAG amp. (...

ok ive been working on this thing for about five days. about an hour each day. is this how long these things usually take? or am i just EXTREMELY slow?

yea im sure ill do something like that in the future

nah i dont think i will. the reason is im still very new to fiberglasin so i dont want to do anything Permanent yet. maybe when i can fiberglass a little better ill try something like that.

ummm yes i know i dont need a box for tweeters. but i needed somewhere to mount the tweeters right? and i didnt want to destroy my 3 inch stock speakers. so thats y im making the tweeter enclosure in the dash.

yea

i got a few drops of resin on my dash. but i was told that acetone would take it off. so i will try that.

Ok guys, Yesterday I started my first fiberglass project. I bought a set of audiobahn components for the front of my car. I didnt want to mess up the 3 inch stock speakers so i decided to make a tweeter enclosure in the top of my dash. im not done yet but im half way there. the speakers i...

if u put the screen there then what was all the fiberglass on the dash for?

wow ty for that info. that will be much Easier to fit in my eclispe

I got them on ebay and i cant return them. The back of my car is 7's, but the front doors are 5 1/2. The dash speakers are 3's

well anyway u take it the 6x9's i got wont fit cause there huge it hits the tire wall and is still more than 2 inces out. i made a temp holder for the 6.5's but i still want to install the 6x9. so anyone know if i can fiberglass the hatch by doing what i said before?....ty

ok so all u guys told me the back speakers in my car were 6x9. i didnt want to have to remove the whole back area of my car so i said what the hell u guys always give me good advice so i went out i bought 6x9. paid like $110 for them.(which is a week of my pay.....just got out of high school)...

put them back on FAST.

hi guys. i want to put an xbox or ps2 in my car. im not sure which 1 i sould get yet. but i have one question. when people put these in their car how do the power them?...ty

ur car looks nice. but the sides and back dont match up with the front. if ur going to have a kit in sides and back u need to do something with the front 2. maybe u should get a lip for it.

i say keep them... they look siK.

is this really the answer? if it is this simple y would people even say that fiberglass cant bond to plastic?

anyone?