Hey guys....quick overview of mods.... G4CS with 90amp DSM alt relocated to the back with Jays kit, redtop optima battery, relocated to the trunk, battery kill switch.. doesn't matter if tested at idle or with revs still get same result.the engine is running of battery voltage alone... 11.5...
quick question.... with a 2.4 (G4CS or 4G64) with a 63 head which timing cover do you use. the 2.4 or the 2.0?i am using the 63 timing cover and with base timing set to the 5* mark on the cover it runs like shit, and my CAS is almost all the way advanced.did i use the wrong cover?
Hey guys i recently relocated my PS and ALT to the back of the engine and am wanting to run a AN line from the pump to the rack, but still keep the flow control valve...so my question is what size and thread pitch is the banjo connector?the side that screws into the hex head.
seems its...
back one again with the renegade masters.car ran 500 miles before i swap'd chassis,its a 90 engine and engine harness mounted in a 91 chassis and 91 body harness.car turns over fine.
coils are sparking on all four coils in sequence.
fuel pump is constantly running and pushing 40psi of...
everything is BRAND new unless specified.Misc Electronics
Streetglow Blue strobe lights x2 $25 a piece
Streetglow White strobe lights $25
Streetglow Strobe Control Module $40
Streetglow triple cigar outlet $20
Streetglow 60" LED tailgate light bar x2 $50 a piece
Carvox CX2300a Alarm...
Janken
Hendersonville
$150 obohave a complete set of white leather seats.
have cleaned them recently but need them gone,Back set are near perfect no tears or burns
the front well... need some work,need them gone ASAP
best offer takes them.
im no car guru, but as i understand it a car isin open loop when warming up and doesn't run of O2 reading, Revs are higher as to warm the coolant quicker.in closed loop it reads O2 and sets the required amount of fuel to idle.well heres my issue, i have a weird TB with a manual...
1990 AWD TalonBrief History.....Blew a HG
complete Build
Wire Tuck (no cutting wires on the Engine harness, just unloomed and consolidated)Cranks fine and have power to everything in the vehicle.no spark from any coils, so its something before them, it ran fine before the...
Free forum : tndsmcheck it, join it, post it.......For locals By locals.working out the last of the bugs by the looks of itsome pretty quick cars in the area that most don't know about.
Free forum : tndsmcheck it, join it, post it.......For locals By locals.working out the last of the bugs by the looks of itsome pretty quick cars in the area that most don't know about.
www.TNDSM.netcheck it, join it, post it.......For locals By locals.:thumb::thumb:working out the last of the bugs by the looks of itsome pretty quick cars in the area that most don't know about.:thumb::thumb:
so im in the middle of thinning up the body harness getting things that i wont need/use..so im cutting,
ABS,
Cruise Control,
Seatbelts,
SRS,
Audio,
AC/HVAC
Rear window wiper.basically just going through and taking out whatever isn't engine or gauge related,having trouble identifying...
so i have a 6bolt block which has been bored .020" over bringing the bore to 85.5mm by the previous owner
ross 8.5-1 pistons, stock 1g rods and a eagle crank,so my blocks at the machine shop atm, the shop called me up today to inform me that my block is done and ready to go and that my actual...
so im puzzled.... i have a fully built engine, head and block, and has only been rebuilt 800 miles ago.i pulled my head the other day, to find a black oil/tarry substance on three of the four pistons, the engine has less than 1k on it since the complete overhaul,the one piston that...