Sorry guys one person gave me the answer I was looking for and I missed it well was half the answer. It's a narrowband reading but I was trying to trace something unexplainable in words so instead I asked what I asked. I wanted to know the inside and out of ecmlink so I determined that it was...

Guys really???? I tell you man this placed changed since I first signed up. Thank you for the post but if your not going to answer my question then just don't post please. What is the dead needle for the stock boost gauge while acting as a a/f in ecmlink telling me when it's stuck on the bottom...

Hey guys real simple I think. When you have ecmlink and u have the stock boost gauge set to a/f ratio... What is going on if its not moving up or down? Does that mean am getting no gas. Does the mean the o2 isn't working? Just trying to figure something out

I got a 6-bolt swap too. Give me a hour or so i am cooking right now so i don't have time to check. But all else fails go to the source..... Re-wire from the ecu.... This pin out is for a 2g ecu.http://www.dsmlink.com/images/forums/2GECUPinout.pdf

Did you hook up that aem wideband to the ecu to be logged?? If so check your work. There is also proper ways of testing the coil instead of just swapping it.. Do you have a in-line spark tester? Have to find if you have no spark or weak spark

Check firing order..... Air,fuel spark. which one don't you have.. Or should i say your not getting. Also if you didn't time it yourself then don't say it was timed right. Who ever timed it was it thier 1st dsm timing job?? Does it have ecm/dsm link? Swap wires? Check all cylinders for spark and...

OK i figure it out.... I need that plastic piece that goes inside the bracket of the bracket. Anyone got the part number for this. This is the bracket towards the front of the window that holds the track from rattling. The piece i need i guess you can say is u shaped drivers side because the...

I think you should check that fuse... If you can scan the car and see if it has codes. I am pretty sure if you have a cam or crank fault it would show up. Do you have a check engine light where you just turn the key on to Acc? The relay is in the middle of that circuit go to the beginning since...

One question and no matter what you say i think your going to lie. Did you build it? Did you ever work on it? Because it looks to me like you just looked you just copy down a list of stuff.. Your a brand new member and building something like that i think you would have a build thread...

OK I really think that "Fix the 2g window" rattle is my problem. That bracket is right where my window is really really loose. I called a local mitsubishi dealer and they can't help me the parts guy is new and said in the past 3 years he have been there a 2nd gen eclipse has never even came into...

Really?.?.?.?.?. anyone know where i could find how to properly adjust the 2g window. (bump)

Hey guys i searched for the post of the window adjustment and i couldn't find the thread this is for a 2g gsx someone care to throw me a link

My radio once did the same thing i didn't notice the dash dimming or anything but check how many volts are coming out your alternator.... Then make sure ALL of those volts are getting to the battery. Then i would check ground on radio, or any other aftermarket sound equment you have

Coil was the problem

OK i did the pvc valve thing and the valve is good. This car has been driving me crazy i can't figure this out. Let's start from the start. One day last week my fuel pump started making noise more then usual. I switched out the fuel pump with a brand new unit. The new unit makes noise also but...

I have been having a couple issues with my GSX Misfires as soon as i go into boost doesn't matter if it's just climbing to speed or WOT. My fuel pressure is OK and my settings for ecmlink were checked and re-checked for 660cc injectors. I am doing a boost leak test and i have air coming from the...

You know i wanted to just swap ot the fuel pump seeing it's not that hard to do.. I am a tech at a VW dealership so all my good tools are at work but i have stuff at my house that can get me by. I don't have the wiring diagram yet for the GSX but i noticed somethig else and would just like to...

OK here the story short and sweet. The other day going to work i started to hear a noise coming from the back seats. After getting to work i was found the noise to be just as loud outside the car on the passenger side. After thinking about it for a second i came up with the fuel pump.I know they...

Rear bumper??? What about the doors, and hatch?? I stripped my 91 1g down to the BONE...... I had everything that would unclip/unbolt.... I sold just about 3 grand in parts with a stock motor and a 16g being what the car had... Somebody will want it if you have the space to hold it.. Just saying...

Maybe just maybe in 25 years when i'm 50 years old they will try to bring it back like some of the american model cars going around now. But like everyone else would say if this is ever to be done it needs to me a remake of the 1g or 2g. I am a 2g guy but i had a 1g for about a year and a half...

You guys are so entertaining... How long are you going to go on with this thread it's a waste of a moderators time. MORE INFO/PICS NEEDED GO LOOK AT THE $%^ING CAR IN PERSON problem sloved. This thread can now be closed as the result of greyspyder117 sloving the problem. You guys make...

LOL i'll leave it at that... This use to be a good site but now is just for silly questions.ROFL. Wait Wait i think it's been a full 10min without a "What turbo do i have thread" ROFL

Is the vibration in the steering wheel or in your seat. CAn you see you hands shake while driving. Or do you just feel it in your butt while driving?? Hand shakes = front of car..... Butt shakes = rear of car... It's not always that simple but it's a place to start

Lke said before i have a evo 3 16g still go with the stock lines :thumb:

yes stock lines and i never thought about a fire until now be thats sounds about right... I guess the car will be down for a week or two while i gather money for all the gaskets and what not. I know i had a little shaft play in it when i first got the car but it has got worst so i will swap the...

I thinks it's pretty clear that my turbo line is leaking right under the exhaust manifold. I put about a qt of oil in the car about every week and a half. My question kinda is crazy and common sense but i would still like a input. My turbo doesn't boost high anymore. I use to hit 18psi and now i...

Thanks guys for the help... When you say the throttle plate adjustment screw you mean BISS?

Thanks guys for the input but would that tps sensor make the car act like that??

I am just wondering what this would cause. I have ecmlink and when i press the pedal all the way down it only reaches 88%. What i have my foot on the pedal about 3/8 to 1/4 it still reads 0%. I am asking this question because i am kinda getting a jerk on the highway when i slowly let off the...

what are you using to try and get it off... You know there is a special o2 removal tool.... But why are you taking it out?

I disagree... If your on this site you most likely own a DSM. If you own a DSM you are taking a gamble if you car is going to get you to work or even start up in the morning. ;). Just joking by the way "keeping up on everything is the key"

lol wrong website honestly i didn't see that one coming LOL... Ummm maybe not under newbie ill give you but tuning section umm i think this would go under but again thank you for your help.. It sloved my problem right away.. Do me a favor 420 why dont you give somebody some helpful info and im...

Thanks again guys for nothing..... hangouttuners.com should be the name of this site. Now let me get a flame for writing this or a quick smart response what someone thinks is wrong but i already figure it out by myself . Did i spell something wrong omg someone correct me please... LOL this place...

Hey guys i can't seem to figure this one out. I just replaced the front o2 sensor. i know it works because when i rev the car it moves. At idle it is stuck. Does anyone see something wrong with my log?

I know I have to post the log but if it counts my airflow doubles at the same time and the hz for Maf doubles also

I'm using ecmlink around 2900rpm then jumps to like 7500rpm now i never bring my car that high. Needless to say it skips 3-7400rpm the engine feels like at this point it has a miss in it. What could make this happen i know a log would be helpful but am at work and lucky i have time to post this...

I feel like such a dummy. i git this cat back system and the punishment racing dp. Trying to put it on at work today i could not figure it out. Right after the dp do you put that little 3inch to 3inch coupling or the mid pipe? I thought i was all good and done because i put it together on the...

Hey guys am looking for a 3 inch downpipie foe a 98 GSX i have the Megan cat back (not installed yet). I want simple bolt on downpipe. Every where i call for the megan 3 inch downpipe is out of stock anybody know where i can get one?

Thanks for the link... All i seen in that link was the weld on flanges... Is that the only way to get a catalytic conveter to bolt up to this exhaust sytem? I would not worry so much about the cat but emissions :banghead:...... Nobody makes a direct fit 3 inch cat for our cars? If i could ask...

I just just this and i am looking for a cat to bolt up to the flanges 3 inch cat... Anybody got a link to the cat that will bolt up to this... 3inch

I have a 98 GSX with a 6-bolt swap. My noob question is what ignition wires do i buy 2g or 1g??? I think 1g cause thats the type of oil filter i use but just want to be sure. I order almost everything from a vendor that is mentioned alot on this site and just don't want to have to return...

I think that this type of thread needs to stop with all the bulcrap. To answer the question no such thing as a 6 speed tranny is made for our cars yet. Please now mark this tread resloved. Thank you but am sick of seeing a tread have 15 post when it could be sloved with one. (Most of the time...

umm the fuse for these on my 98 gsx is the on the fuse in the engine bay marked taillights.... Now mine may have some bootleg wiring or you have no gauge lights, taillights, and marker lights.. and this would not be cool driving around like this :nono:... But i bought this car used with a 6-bolt...

Is this with or without the shafts??? I do see lower then this around 9 or 10psi at idle.. You should be careful answering a question with a exact number.. It's always going to get a worry wart like me writing a post like this.... :coy:

i tell you what i am not sure about the tranny's are the same but the if the rs and gs i have the harness to that. If you want, find out if they are the same i'll look for it for you. Just pay shipping

:thumb: Greyspyder117 Likes this

I am stuck in the middle i like the 2gb exterior to death but 1g interior

Off topic but before the FMIC if and i say if cause i do not know.... I would take care of those oil looking stains under where you park before changing parts just because you don't like them. Like i said i do not even know if they are yours.... If the intercooler works then fix the leaks first...

Black ops.... Add me and please just write a note saying your from dsmtuners. It's whtsthismean1028

True it was a bad clutch disc.... But what broke the spring like that... Listen to what they said it was a loose tranny to engine somewhere.... I had the same problem.. Do it right the first time or you'll be doing it twice... I bought my 91gsx with a brand new 2100 act disc and flywheel... I...