One other thing that has yet to be mentioned: the 45 degree fitting on the underside is for a hose to take the return line fuel to the bottom of the tank. That does NOT connect to the outlet side of the unit. Only the other two barbs (one straight and one at I think 10 degrees) if present...

We didn't tackle this project with a Wilwwod rotor in mind for basically 2 reasons: 1. They are expensive 2. We would have to start from the beginning, finding a rotor of the correct diameter, thickness, and determine the offset.The Wilwoods we stock for 2g are too small at only 12.2". These...

We have sold TONS of aftermarket water pumps, both Gates and GMB, and have never had a single complaint. We only recommend OEM for all timing components (INCLUDING) the belt, but for water pump we recommend aftermarket as we don't feel the price difference is justified by any quality...

I would like to thank all of you for the kind words and the warm welcome!

For those of you that haven’t heard of RTM Racing, we are up Southern Ontario. I have run RTM Racing since 2003, and my right hand man Paul joined me in 2008. He now does 90% of the work ☺.We started out a little differently than most vendors. I ran a tool and die shop, and decided we...

They ARE available, just rare and expensive as hell!

Just to close this off....we at RTM are now aware that Supertech makes two different sizes of valve stem seals, and we now have both sizes in stock.Again, sorry for any confusion or problems we might inadvertently have caused anyone.

It turns out I DO have an account here, just never use it, LOL.Gomes is absolutely correct. We were wrong, in that we were UNAWARE there were two different diameters of valve seals available from Supertech. We were under the (mistaken) impression that ALL Supertech valve seals were...