Should update my profile. It is running speed density with Omni pro in the original MDP spot...

Hi guys so going to make this short and sweet. drove the car Monday and when getting into the throttle normal cruise the car was bucking hard. It eventually came to a point where I had no throttle response, stalled as soon as I pushed in the clutch. had laptop and hooked up to see what link was...

No offense taken at all. I'm new to ecmlink and still figuring out all it can do. By no means do I consider my self good at tuning with it. I am going to be paying for someone to tune the car next year. the tuner told me to install flex sensor ,get everything working correctly before I brought...

@GST with PSI was just looking under the configuration tab and did not see where to tell ecu that there is ethanol sensor installed. Red the wiki and here is what it said. Does this sound right? basic ethanol sensor functionality (i.e., automated global fuel adjustment). Once checked, the ECU...

You are absolutely correct I do have some work to do on the tune. Have a set of 2150cc injectors and planning on running E85 first thing next year. Getting a dual map tune on the dyno. So didn't want to spend time perfecting Wot on 650s just to throw other injectors in and start all over. Was...

So an update. I uploaded the file that @GST with PSI sent and it worked. Attached a file around 230 seconds I did a 1st-3rd pull. she maxed out boost about 28psi and dropped down to 22psi at redline.Have to tweak the Base DC table for sure. Thank you for all the help guys. this site never...

I should have wrote that a little better. When I said top port tee'd in with pressure source at compressor housing and bottom of port of wastegate. Top port meaning top port on the side of Ingersoll Rand solenoid that has two ports. It is setup how the wiki stated and pictured under using both...

I will for sure hook the vac lines back up to controller and add wg values to the log. Probably taking the car out tomorrow if it does not rain. Thank you for the reply.

1998 gst with 7 bolt motor, FP Black and external wastegate off the manifold. hooked up the Ingersoll Rand controller using both top and bottom ports the way that wiki says. top port T'd into compressor housing and bottom port of waste gate. side with only one port is hooked up to top of...

I have an evo 8 16g turbo. My question is, could i swap an evo 3 16g exhaust housing onto the evo8. That way I wouldn't have to get a twin scroll manifold and fab up a downpipe.

i mean i have the knowledge and patientce to do it but money is the issue. that and i asked because i didn't see any post about doing it yourself so i decided to ask. but your right doing it yourself is very risky. so ill just save up and send it out.

so i've got a 90 gsx with a non-eprom...my question, is there anyway to convert your ecu to an eprom by your self? i know that dsmchips.com and ecmlink offer a conversion but i dont have money for them to do it and i can't have the car down while i send out the ecu.any help is appriciated...

It there a way to tell if it's a 22 or 23 spline without pulling t-case?

Will a 95 tsi awd t-case fit into my 90 GSx? Stock 90 transmission.

It showed one count of knock at one point..but it never showed up again. i got to go to work soon so when i take it to work ill try to see what my other problem is. hopefully i don't need a new t-case of something.

well the car is black so it's gonna be hard to tell if there is any smoke...but ill look..just took it out for a ride and hooked the data logger up to see if my WB and the logger were matching. the logger was reading slightly different i didn't get the chance to full boost it to see what my...

got a 90 gsx, all parts are listed on the profile. got 560 injectors, 255 fuel pump, FPR kit, safc, and big 16g running 21 psi...i can redline 1st gear, 2nd gear, but when i hit about 5500 RPM's it cuts out like i hit fuel cut or something. my Air fuel ratios are good (reading 10.0 on the wide...

Yes, it goes up smoothe and even with the passenger side. JUst not down.

Got a good driver side motor?

got a 90 gsx with pop up head lights...driver side goes up..but won't come back down. the passenger side is working fine, goes up and down just fine. lubed all the moving parts on the driver side. winds down smoothly also.does anyone know what the pin outs are for the driver side that actuay...

Haha oops my bad. Well do you know where to get those covers?

I'm in. what's the status, price and all that on these? also i've got the money. but i wanna see the pics of the covers before i send the money.

So I can put 91-94 cables on the 90 and it'll still work? ALso some guy is gonna give me some cables...he said they are adjustable, anyone heard of that?

True, thanks for the help. Yeah the axle is busted at the hub. Ordered another axle so hopefully that fixes my problem.

just picked up a 90 gsx...the car has a bad passenger side front axle. it's for sure bad. the boot is completly torn and i can hear it growling and clicking. will that bad axle cause my front diff to stop working? as of now only the rear wheels are driving the car. does that sound right? i need...

I've got a 95 gst, but sadly i wrecked it. I can explain how it happened in one word too....women. lol. it wasn't to bad of a wreck only the front driver corner got smashed in. the engine and everything is still good. I'm buying a 97 gst rolling chassis. it's wire tucked with the fuse box...

It's got penzoil full synthetic gl-5 (80w-90)Is there a way to bead the piping yourself? And my couplers are cheap ones. What brand should I get?

I was using and still am using t-bolt clamps and theystill didn't hold. BUt wed. Is my day off so I will definitely try to bead them.ANyone have tthought on the tranny?

I work at A jiffy lube and when i got my oil changed the guy on the underside of my car drained my tranny and put new synthetic fluid in it that was about 2 weeks ago. it's been whining ever since i got the tranny done. it takes 80-90 weight right?Ill do the boost leak test tonight...

To start off, I think I have a boost leak. When ever I get into boost it sounds like its just leaking all out. It's just a loud like hiss. I have a front mount and have tightened all the coulpers pretty tight butijust cant find where theleak is. Is there something I could do to narrow where It...

I have a 95 GS-T and bought it from a dealer. The guy traded it in for a deisel truck and when he dropped it off he didn't tell the dealer anything about it so i was kind of blind buying it. well i bought it anyway and 2 months later the clutch started slipping then my dif blew in the tranny. i...

I have a 95 GST and today i installed an safc II and set everything to Zero and set the sensor type to Karmar and about ten minutes down the road my check engine light kicked on. The car isn't making any wierd noises or anything like that. and I'm prettysure everything is hooked up right. the...

how should i loosen the throttle cable? Is there an adjustment on it? or do i have to get a whole new cable?

I have a 95 GST with hard upper intercooler piping, and whenever i go to take a drive and the car is warmed up completly and i shut the car off and come back to it 10 or so minutes later and start it the car will idle at like 3K if not more for at least 20 minutes. also when ever the car is...

No, it wasn't me. I just got the car about a month ago so I didn't have it in the summer.Do you go to the get togehers down at the stacks? If so you'll see my car there sooner or later. I always cruise with the kid that has the audi TT with a silver body and black top and the kid with the black...

Webconnect, that was hillarious but in real life it would look retarded. But If I do decide to get it painted black I'm not paying for it...some guy hit my front end the other day and his insurance cmpany gave me money so I'm using that to get the car painted by a body shop and was just gonna...

yeah, that's true. but there are 3 other red eclipses around my area and i wanna be different from them. well, they don't have the 97-99 spoiler like i do. but still.

Thank you! what do you think should i paint the hood black or leave it red how it is?

I am thinking about getting my hood painted black, only because i don't have the money for a carbon fiber one. lol and i wanna make my eclipse look different then the ones around my area. so can someone photoshop it so it has a black hood just so i can see what it looks like? thanks alot!!!

I finally got another DSM and reallllly want to go to the shootout! i promise i'll go. i wanna just run my car down the track to see how fast i can get it down the strip. lolI have a suggestion though, there should be a meeting spot the friday before the event. say in the middle of PA or...

alright cool. but i'm not gonna be able to take the first gen. some guy pulled out infront of me and i was doing 30. and couldn't stop in time. So needless to say it's done! I'll post pics if you guys want me too. hopefully i'll have another DSM by then.

hey man, i have a 93 gsx and i'm all stock except a 3 inch turbo back, i have a huge dent in my rear quarter panel. Would still be able to run in the stock looking DSM bracket? I just want to see how fast i can get my car down the strip. lol If i am OK to run then i am DEFF in, NO question about...

well now that i think about it, it seems a little wierd that a civic si can keep up with me and it only has cat-back exhaust. so maybe my slutch is slipping. ### i should be able to smoke him since 1. the weather is colder and colder the air the bigger the bang 2. i'm turbocharged and 3. i can...

yeah, i thought that too because of the smell. but, my RPM's don't spike. They go up as usual and so does my speed. if my clutch was slipping my RPM's would spike and i wouldn't go anywhere...right? i'm taking off the intake today to find shaft play. i'll post pics if anything is messed up...

well no matter what i wanna get that 16 G on there. but i was just out again and pulled over and I'm getting the smell that smells like burning brakes from under neath the hood... and also the new oil cap was soaked in oil. it had oil all over it. and the oil was all over the top of my engine...

that is a very good way to look at it. i mean i didn't think the engine was rebuilt because there was no recipt. but it's a small 16g turbo. i'm just gonna run it on stock boost level will i still need to upgrade the fuel system? and the turbo came off of my uncles friends 2g he took it off...

well my car does have 120k on it. but that's actually pretty good for a 93. and they guy told me that the engine was rebuilt about 20,000 miles ago. but did buy that new oil cap though. and yeah i found that my car did run like crap with it vented. so that's why i stuck the tube back on to...

your right about the oil leak, my oil cap was leaking on to my valve cover and it was probably going down and urning off the side of the block. there was oil all over the whole top of my engine. and when i start the car my oil pressure gauge is below the L (low) on the gauge. the guage will...

okay, well i just got the oil cap replaced and it doesn't seem to be leaking anymore from there. but i will have to take the intake off tomorrow when the car is cold. i just had it out and the engine yet again had smoke under the hood. and no it doesn't smoke when it's sitting at idle. i'll...

will do. i'll check for shaft play. is there anyway that you can hear if your turbo is bad? ### when mine starts to spool it makes this real wierd sound. and also the smoke is coming from under the car, not the exhaust. but is there a way to check for an exhaust leak? and after the run if i...