I know there's several posts about the clips, but not so many about the clip holders. I'm talking about the white chunks of plastic that appear to be epoxied onto the backside of the door panel. I believe the only areas on my panels that can actually hold a clip are the slots at the bottom of...

A few days ago I started having this whining noise coming from the left side of the engine. I thought maybe it was just the tensioner, but tonight I did a tensioner delete with a smaller belt, a mod I had to do a while back when the bolt broke, and still had the noise. Alternator is only 2...

A few months ago I started noticing my car was driving differently. I've owned the car for about 11 years, so its pretty obvious when something is going bad. I've replaced a bad lower, straight, control arm due to a knock when going over a bump or when I hit the brakes. I recently started...

I know there have been many OLD (2006 OLD) threads with some info on them, but people just talk about what the MFG says it'll lower the car. Does anybody have actual measurements of the ride height? I'm talking ground to bumper, side skirts, rear bumper? Even ground to wheel wells would be...

Like many people with cf hoods, mine have cracks in the epoxy/gelcoat. Has anybody tried to laminate another layer of cf over the hood? Mine is still structurally sound, just looks bad so I painted over it. Think its worth the couple hundred in supplies to get the look back?

I've found my vapor purge control solenoid is bad by bench testing. Applied 12v and the valve wouldn't move. After trying to find one for my '99 RS I came up empty. Everything I found didn't look like the part I was wanting to replace. I eventually started looking at Talon and Sebring parts...

I was under the car today adjusting my exhaust system and noticed a leak at the clutch slave cylinder piston, but on the transmission side, not the cylinder itself. Another concern was above my oil filter there is oil on the block. It could be from where my PCV hose wasn't tightened down well...

So I have a GReddy catback exhaust and its really the only thing that doesn't shine anymore on my car after my new paintjob. There some tar and lots of exhaust soot. I was wondering if anybody has polished/cleaned up their exhaust tips, and what you have used. Wasn't sure if just plain old...

I currently have a GReddy EVO2 catback exhaust with a cheap exhaust mani and hiflow cat. The muffler is starting rust out being I got the car from up north and probably wasn't taken care of/washed off after the harsh winters. I am looking to get the Apexi WS II catback system, but only if...

So after several years of having a half-assed paint job from some low-life I paid to paint my car, I have painted it and looks better than ever. Just to fill you in, it was factory red, I wanted it metallic black, got crap black, and now its back to a metallic red (Kembase Red Hot Metallic)...

I've had the P0455 code for years now, and never had any issues with the car since is an EVAP code. I have started trying to diagnose the code, and with that, replaced the filler neck and gas cap. All hoses seem to be ok and not rotting, but the filler neck was rusted and leaked when using a...

This isn't another "My door handle broke!" thread.When my car was last painted, I think the guy painting put the wrong screw in the door to hold the handle in place. This has led to the threaded piece in the handle to break loose and just spin with the screw. Any ideas on getting the screw...