The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support STM Tuned

Search results for query: *

  1. Bo0sTeD 4G63

    1G Shifting issue

    What are the shift issues that you have? What is the car doing? Symptoms?
  2. Bo0sTeD 4G63

    1G Where to find piping for coolant hard lines

    You can find the tubing you need on ebay.
  3. Bo0sTeD 4G63

    Wanted 450cc or 560cc injectors

    I am looking for some stock 450cc or 560cc injectors. If you have any you would like sell please send me a message.
  4. Bo0sTeD 4G63

    2G Water pump leaking?

    Just make sure when you change the water pump you change all the timing belt components. That way you don't have to worry about that for a very long.
  5. Bo0sTeD 4G63

    What Injectors are these?

    There should be a serial number on the injector. Search for that serial number online and it should tell you what injectors they are.
  6. Bo0sTeD 4G63

    2G Is AWD conversion worth it?

    AWD is the way to go, my car was originally FWD and I converted it to AWD.
  7. Bo0sTeD 4G63

    3D Printed Car Parts

    I have a 3d printer and could work on making some parts. Anyone looking for a specific part?
  8. Bo0sTeD 4G63

    New member in Georgia!

    Congrats, I would love to find a car in that condition.
  9. Bo0sTeD 4G63

    Wanted 2g Stock 450cc injectors

    I am looking for some stock 450cc injectors. If you have any you would like sell please send me a message.
  10. Bo0sTeD 4G63

    420A Transmission problem - Broken Bellhousing

    I would do what he said. I have done this before and has worked great.
  11. Bo0sTeD 4G63

    New to me dsm

    Congrats on the DSM, welcome back and I hope you get it running soon.
  12. Bo0sTeD 4G63

    2G Speed Sensor/Odometer Issues

    Did you replace your speed sensor with a new one?
  13. Bo0sTeD 4G63

    New to DSM

    Welcome to the site and congrats on the car it looks clean. Can you post a video of the noise? It could be lifters if you hear it ticking.
  14. Bo0sTeD 4G63

    2G 1995 GST OBD-II Scanner Brand Compatibility? is 1995 4G63T 2G GST OBD-II? A Myth? 😱

    Have you check to make sure your OBD plug is working corectly?
  15. Bo0sTeD 4G63

    2G Manual Transmission AWD 5spd bell housing broken

    I feel your pain, that had happened to me a while back but the hole was much smaller and I took it to a weld shop and he was able to repair it. I don't know if you are part of some of the FB groups but I have seen some for sale on the groups. Good luck
  16. Bo0sTeD 4G63

    2G Mishimoto intercooler

    I have the R line and it is a big intercooler. When I was first inquiring about the intercooler I was told by a Mishimoto rep that the R line intercooler will support 1000hp+ but I don't know how true that is since I'm no where near there.
  17. Bo0sTeD 4G63

    Newbie Hello!!!

    If you need some questions answered you came to the right place lol. Welcome to the group
  18. Bo0sTeD 4G63

    New guy

    Welcome to the group, this is the best place to find information about these cars.
  19. Bo0sTeD 4G63

    2G Overheating on idle (Stops when rev)

    This happened to me not to long ago and it was the water pump going bad. As soon as I changed it the problem went away.
  20. Bo0sTeD 4G63

    2G Introduction into DSM

    Welcome to the community... there's tons of information on this site make sure to search as I am sure you will find your answer.
  21. Bo0sTeD 4G63

    2G W4A33 Transmission Valve body oil passage porting

    Not a problem, also the part number for the Raybestos clutches that come in the kit is R600620.
  22. Bo0sTeD 4G63

    2G W4A33 Transmission Valve body oil passage porting

    The Kiggly 6 friction kit has 2.9mm of space and the steels are 1.1mm.
  23. Bo0sTeD 4G63

    2G W4A33 Transmission Valve body oil passage porting

    I measured the clutches and the steels. You are right the steels are thinner. I am assuming they must custom make these steels.
  24. Bo0sTeD 4G63

    2G W4A33 Transmission Valve body oil passage porting

    The only difference I see is the end steel plates are thinner but not the clutches.The clutches appear to be the same thickness as the other ones.
  25. Bo0sTeD 4G63

    2G W4A33 Transmission Valve body oil passage porting

    How would the 6 pack wear faster? From my understanding the 5 pack is good for up to 25% more and the 6 pack is good for 50% more.
  26. Bo0sTeD 4G63

    2G W4A33 Transmission Valve body oil passage porting

    These valve bodies are getting harder to find good thing I have an extra one. I have the Translab 175hp kit installed. I had originally rebuilt the transmission with the IPT kit and I have the IPT torque converter. I have my center diff already welded. I first started to notice the transmission...
  27. Bo0sTeD 4G63

    2G W4A33 Transmission Valve body oil passage porting

    Hello everyone,I am currently rebuilding my transmission because my 3rd gear went and it looks like it overheated. I was doing research online and saw that kiggly racing recommends porting the valve body oil passage. Does anyone know if this is truly necessary...
  28. Bo0sTeD 4G63

    Resolved Smoke after rebuild block

    I had the same problem when I rebuilt my motor. It was smoking white for a little but the more I drove the car the more the white smoke went away till it was all gone. Once you rebuild the motor you need to make sure you seat the rings especially if the block had work done to it. Some people...
  29. Bo0sTeD 4G63

    2G Tire and wheel recommendations for brembos

    I have the evo 8 wheels and I am running 255/40/17. I haven't had a problem yet and I have brembo calipers on all four wheels.
  30. Bo0sTeD 4G63

    Cant crank car

    Make sure the signal wire is hooked on to the starter. Also try jumping it with a screwdriver and see if that works.
  31. Bo0sTeD 4G63

    ECUflash Tuners for ecuflash

    Ecmlink is the way to go it is definitely worth every penny.
  32. Bo0sTeD 4G63

    2G Shifting my automatic, manual

    A lot of people use the shift box. I have the kiggly mod done to my car without the box so I just shift the lever from L-2-3-OD and it works just fine. It all depends what you like.
  33. Bo0sTeD 4G63

    RS eclipse worth it or no

    Wait for the right car, listen to what everyone else has already said they are right.
  34. Bo0sTeD 4G63

    *** ACTIVE / OPEN *** 2G Tubular front subframe

    I am interested in one of these. Do you have an estimate of what this product will cost?
  35. Bo0sTeD 4G63

    Dropped something into Turbo coolant line

    I have removed it before with a aftermarket turbo but it was a PITA. It could be done but I think you are better off cracking the nuts loose and trying it that way.
  36. Bo0sTeD 4G63

    Aftermarket Alternator

    A lot of people use the Saturn alternator. I know there is a write up somewhere on the forums. Why do you need a hi performance anyways?
  37. Bo0sTeD 4G63

    ECMlink (help) nitrous setup with ecmlink v3 full

    Why not just have ecmlink control the nitrous it is much easier. I use to have it on a button but honestly why have more to worry about during launch.
  38. Bo0sTeD 4G63

    2G Bad spark on cold start

    Have you checked you CAS? make sure everything is working properly there.
  39. Bo0sTeD 4G63

    2G Weird rattling anyone one had this

    Stand outside, have someone drive it and try to see where it is coming from.
  40. Bo0sTeD 4G63

    2G DSM Auto Trans / Torque converter pilot bushing / bearing

    I also had the same problem about a month ago and I took a chance buying the 2.4 in hopes it would fit but it didn't. I had to do the same as @DSMPT did. Everything fits and works just fine you just need to shave the inner side a little like he said.
  41. Bo0sTeD 4G63

    2G Automatic Stall Nitrous System

    I am using a 50 shot.
  42. Bo0sTeD 4G63

    2G Mishimoto slim fan keeps blowing fuse

    Have you tried looking at some SPAL fans?
  43. Bo0sTeD 4G63

    2G Automatic Stall Nitrous System

    I purge before the I get to the line to make sure the nitrous is there whenever needed. If not you may have a little delay. That kit that you are looking at is similar to the one I have. So far I haven't had any problems with mine I just use it to spool up and I am running an IPT torque converter.
  44. Bo0sTeD 4G63

    Hey guy's i'm new in here!

    Welcome you made a great purchase!!!!
  45. Bo0sTeD 4G63

    Spyder Coolant Overflow Tank question (99 Eclipse GST Spyder)

    Why don't you just go with an aftermarket reservoir tank? Have you tried miller import parts, junk yard, performance part out or rix racing.
  46. Bo0sTeD 4G63

    New to forum

    Welcome to the community... What parts in particular are you interested in upgrading to get a better idea?
  47. Bo0sTeD 4G63

    Morrison Fabrications Welding Thread

    I need a new MANIFOLD!!!!!!
  48. Bo0sTeD 4G63

    2G New DSM Mitsu Owner Columbus Ohio

    Welcome to the community. You need a car wash lol.
  49. Bo0sTeD 4G63

    Just saying hi lol

    Very nice car and welcome to the group.
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top