ok so i have a 97 gsx manual that i will be using as parts for my other 97 GSX that i have...this car is not usable due to the taxes owed and is not worth paying since i found myself this better gsx.i will be taking out the motor and transmission and rear axle and drivetrain parts sensors...

where can i get them i can't seem to find a correct answer anywhere . they are slightly bigger than the stock 450 lower injector seals by like 1/8 of an inchImageShack® - Online Photo and Video Hosting

first of all yes i will be re circulating bov. my question is how do i hook my boost controller on my external wastegate?<a target='_blank' title='ImageShack - Image And Video Hosting' href='http://imageshack.us/photo/my-images/694/dsc00448be.jpg/'><img...

YouTube - 4g63 :rocks:

<iframe width="425" height="349" src="http://www.youtube.com/embed/DMH6O5Z9EAU" frameborder="0" allowfullscreen></iframe>Ok i connected the inter cooler piping and just 3 vacuum lines are open the car has a walbro 255 fuel pump and 272 cams and a 1g cam sensor and 6 bolt swap. the car...

what goes there? a line? and where do i connect it to...an oil cooler? i have no funds at the moment will a line that connects to both be quick solution for now i know the turbo gets the oil hot which is bad but right now i just want to turn the car on and hear it idle...ImageShack&#174; -...

they should change the name of the game to FML instead of set for life.. :cry: http://img826.imageshack.us/img826/2826/dsc00199qdc.jpg<a target='_blank' href='http://img826.imageshack.us/i/dsc00199qdc.jpg/'><img src='http://img826.imageshack.us/img826/2826/dsc00199qdc.th.jpg' border='0'/></a>...

all the points on my timing belt mark except that the dowel pins are in opposite mark they are facing down.

ok the one circled in YELLOW is supposed to be used from the 1G correct?and the red circled is supposed to be a 2G CORRECT ?so how much am i supposed to cut off the blue part or the orange part?i really need help i need to fix this today.

while doing a 6 bolt swap on my 2g i forgot that the 2g engine mount is supposed to be used on my 6 bolt motor....so the engine and timing and everything is on my 2g anything i could do ? a custom engine mount ? or a 1g engine mount will work?FAIL im sad :ohdamn:

did a 6 bolt swap with NEW fidanza flywheel and xtd stage 4 clutch is the shim plate needed?https://www.rtmracing.com/xcart/product.php?productid=16900

ok yes i searched i just want to make sure i understood everything...1st Q? can i use a 2g coil pack on my 6 bolt?2nd Q? do i need any special bolt for the clutch which are those circled in red? ImageShack® - Online Photo and Video Hosting3rd Q? 6 bolt flywheel and xtd stage 4...

what is this part circled for? sorry for newb question i tried searching<a target='_blank' title='ImageShack - Image And Video Hosting' href='http://img840.imageshack.us/i/2gtb1.jpg/'><img src='http://img840.imageshack.us/img840/9995/2gtb1.jpg' border='0'/></a>Uploaded with <a...

YouTube - Crows vs. Cat vs. Cat Fight ROFL

rust for the win.<a target='_blank' title='ImageShack - Image And Video Hosting' href='http://img227.imageshack.us/i/dsc00035cw.jpg/'><img src='http://img227.imageshack.us/img227/2489/dsc00035cw.jpg' border='0'/></a><a target='_blank' title='ImageShack - Image And Video Hosting'...

ok so tonight my car got broken into and a few minutes later the theives got caught.....thanks to my friends mom she caught them at the shop around 10pm at night stealing.. she was just passing by to go get dinner and reported it...well i have a few questions that i forgot to ask to the police...

as the title says where can i buy them i believe they are 8 x 1.25 i need them ive been looking around town everywhere even at junkyards and no one sells.... :cry: i also searched but never found an answer....

EDIT: what timing tensioner do i use on my 97 GSX with a 1G hEAd?

any one know if someone makes a shift boot like this for our cars? would be awesome <a target='_blank' title='ImageShack - Image And Video Hosting' href='http://img97.imageshack.us/i/0708epcp03z2007lamborgh.jpg/'><img src='http://img97.imageshack.us/img97/8932/0708epcp03z2007lamborgh.jpg'...

who's buying it? ive always been a fan of the COD games anyone else? <object width="560" height="340"><param name="movie" value="http://www.youtube.com/v/CN6517n1xDw&hl=en&fs=1&color1=0x3a3a3a&color2=0x999999"></param><param name="allowFullScreen" value="true"></param><param...

i just got this joke through text message though i would share..ROFLwhy don't witches wear panties? so they can get a better grip on the broom.anyone have jokes or pranks for halloween?

so here is car as how it is right now i need help on my build that i want... I have a built 420a Wiseco pistons 8.8.1 .20 overbore Eagle Rods Clevite 77 .50 main and rod bearings with cut crank Cometic headgasket Ported head Arp main and head bolts studs New water pump New oil pump...

what's the name of the song i've been trying to find it for over 2 hours in google but can't seem to get it right... anyone know? skip to 1:45<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/PJSV5pdBx9c&hl=en&fs=1&"></param><param name="allowFullScreen"...

yeah im planning on buying this car which has Manual 5-Speed 1.8L Engine Rear Wheel Drive 2 Door Coupei just want it as a town car to get me from work and back no racing or nothing and since i live near mexico i get the engine rebuild cheap like i would replace the headgasket and motor...

i have an interview tomorrow for a Correctional Officer position...any advice i really want to get this job...i cut my hair for starters i got my interview cloth clean and ironed. :pray::pray::pray::pray::pray::pray::pray::pray::pray::pray:i wasn't the lucky one to get choosen for the job...

i searched around for the guide but...does anyone have the pictures that go with it? http://www.dsmtuners.com/forums/articles-miscellaneous/57412-fix-2g-window-rattle.html

ok well recently i put exxon gas on my eclipse and the tank lasted more than any other gas from other gas stations ive tried... i also saw a sign there that said 10% ethanol which came to mind maybe that's what helps.. so my question is what do you all use and how well do you reccomend?

ok so i recently rebuilt my motor with forged internals ...my question is i got 1900 miles on the break in is it safe to travel 100 miles on the highway to get to another city?

ok so i just recently bought some 17x8 +40 offset Konig Zero...i wanted to know what tire size would be great like for example will a 235/45/17 would be great ? im on stock suspension and my car is a 96 eclipse RS...and also what suspension do you all reccomend for a nice drop that won't affect...

just ordered some konig zero Specs: 17x8 5x114.3 +40mm offset 73.1mm hub bore what tires do you all recommend i'm on stock suspension 96 rs btw i researched and everyone says +40 offset is perfect for a eclipse and especially 17x8 right?<a...

ROTA P45F Specs: 17x7.5 5x114.3 +45mm offset 73mm bore and...what tire size tires do i get? on a 96 eclipse rs.....:hmm:

ok so i just finished rebuilt my engine with forged internals now i just want to chill and work on the body and looks...and then later by the end of this year go turbo....ok so im going to repaint my 2g red and ive been looking at some ROTA rims and i liked the Rota P45F and Slipstream on color...

ok so my friend gave me his rims but the store is closed..... so i cant go buy the special key lock for the lug nut so i come here to ask will they fit??? here are the pictures by the way don't make fun of my wagon wheels haha :p RED= ECLIPSE AND BLACK RIMS ARE 300ZX<a target='_blank'...

I was thinking of buying this kit 420a Turbo kit 95-99 Eclipse Talon - TREADSTONE PERFORMANCE what size of turbo should i get? whats the difference between this one >> Turbonetics Turbocharger 11025 T3/T4E 50 trim stage 2 .48 - TREADSTONE PERFORMANCE and this one > Turbonetics Turbocharger...

ok so i recently did a rebuild on my car low compression for turbo ...ok so i bolted up the motor and everything and i start the car and as soon as it warms up its turns off..then i try to start it it up again and it wont ... have to wait for a while for it to cool down...i replaced the spark...

do you all like this shoe im thinking of buying them..or are there any other similar to this>?:hellyeah:

ok so my 420a head got ported my question is ,how to run rich in a newly built motor built for turbo but n/a at the moment?because im sure imma be running lean, I googled some of this and only found that warmer air or bigger injectors any one have any other idea what i can do? :confused:

ok so my car is in the shop right now and i get it back on tuesday my question is...since im a 420a n/a and my rebuilt kit i bought is low compression 8:8:1 will it affect anything on the motor since there is no forced air on the engine? ...because i was planning on putting miles on the motor...

ok so after my rebuild i cant wait to sound different and stop hearing the stocker jaja ok so my question is i want to buy this Apexi N1 Exhaust System for 1995-1999 Eclipse GS and im going to go with the 80 mm for my turbo application which will be like 3-4 months later is it ok to use the...

eBay Motors: 95 mitsubishi eclipse OEM rear wing spoiler STOCK (item 350118405186 end time Nov-06-08 11:40:03 PST)is this the turbo spoiler which comes in 97-99 gst/gsx? and if so they made an error on putting 95 right? im planning on buying it but want to make sure it is the turbo...

ok ive been having problems with my tension pulley adjuster its been ripping off belts for some reason i think that pulley is not the original one. has anyone had problems with this? and i tried buying the parts in the junkyard but it still gives me the same result, i think maybe a thicker...

ok so i have the 420a engine 2.0 my question is how do u know how many bolts you have because in this site Wiseco Piston and Eagle Rod Combo (2.0/2.3/2.4) - Modern Automotive Performanceit has an option of 6 and 7 bolts mines a 96 eclipse base and also do those pistons fit in both 420a engine...

ok im about to order this Modern Performance Racing Products and i have a quick question im gonna buy .020 over bore because im gonna get my engine bored and the compression im supposed to buy is 8:8:1 right im gonna go the turbo route ...can some one tell me whats the compression is for...

ok well i did the search button so dun come saying use search :)ok so i got a 96 eclipse and my friend has a 99 eclipse we both agreed we want to swap/trade our front bumper would my 96 front bumper and headlights fit on his good? i know his 99 stuff will fit me good but what about my 96...

if i order stndard size it will will exactly the stock size right? <a href="http://imageshack.us"><img src="http://img223.imageshack.us/img223/9793/newbitmapimage3qz1.png" border="0" alt="Image Hosted by ImageShack.us"/></a><br/><a...