Im close to finishing up my 4g swapped mirage.I guess basically think of it as a 1990 talon with a 91 4g63 swap with all sensors. The 90 harness has a few different plug ins compared to the 91.Things I have finished wiring are the tps and the cas.
Now I believe im just stuck with the...
I just bought a 4g63 swapped 95 mirage. The harness in it is a complete hack job. My buddy gave me his spare 1g engine harness to put in the mirage.I pulled the hacked harness out of the mirage and compared it to the unmolested harness. Every plug in was exact except for the tps and cas...
I'm having a very weird bogging issue under 3k rpm. It's a 99 gst auto with a 95 7 bolt swap with a rewired cas, 3" turbo back exhaust, eBay intake, and a evo 3 16g turbo.Car is very sluggish under 3k rpm. You can put a load on it and say build 10psi and it still feels very sluggish until it...
Im having a problem with my auto 2g gst. Just here recently I could tell it started to slip from driving from a complete stop. It also seems like its shifting harder then usual.I'm bummed out on it and im not sure where to check into first. I just got the car running and ive drivin it...
Im looking into trading my 96 civic slow single cam for a 1g tsi awd with plenty of mods.Heres the deal though, it developed some sort of knock recently. Its been parked ever since he first heard it knock.
it doesnt knock at idle, sounds perfect. He said it only seems to develop this knock...
I bought some injectors off craigslist from a dsm'r.
He told me they were pte 680 injectors. I picked them up for like 50 bucks.
I just want to verify if they are pte 680 injectors or something else?Heres some pics:
Ive been in and out of dsm's for years. I've owned several of them. I just got my most recent one back in april. I've always planned on doing a little street build with it.My girlfriend always liked the way they have looked. I let her drive mine for awhile and she fell in love with...
So lastnight I made hard lower intercooler pipe to fix the rigged up pipe I had for the 14b for temp. Drove the car and ran great. Later through the night I put a couple gallons of race fuel in. Drove good, then I did a pull. I blew a coupler off the lower intercooler pipe. I limped it to a...
Im hooking up a remote start/alarm for my car.
I might be answering my own question here...I hooked up all wiring except for the alarm, lock doors, and to unlock doors.
Everything turns on when I try to use the electric start but the starter wont kick on. I dont know if the alarm and...
Sorry if this is in the wrong section.A buddy of mine gave me some nice 18" Giovanni rims for all the time I've spent working on his srt-4. They looked sick on his srt but I was curious if it would just look to big and goofy on a Dsm.
Ive never had anything other then gst or gsx rims on my...
My t25 is completely shot and my 2g has been down for the moment.
So I bought a 14b from a buddy. came with water lines, return line, the original j pipe off the turbo and the o2 housing.
It came with the 1g oil feed line but I dont have a banjo bolt for it to bolt to the head. Ive searched...
Im buying a buschur racing 500 60 trim turbo. Im wanting to know the best way to feed it oil. I asked the previous owner and he ran from the oil filter housing with a restrictor.Let me know what you guys would do.
Thanks,
My buddies got a mirage with a 4g63 swap.
mods-
stock motor with an exception of aftermarket pistons and rods
arp head studs
16g turbo
precision 750 injectors i believe?
walbro 255 fuel pump
hard intercooler pipes
fmic
theres more, but you get the idea.Its tuned on safc2 at the...
My car was a little over 1/8th tank of gas. Started the car up, let it warm up. I start to drive to the gas station. Its only about 5 minutes away. On the way there my car starts to feel like its cutting out a little violently. I soon press in the clutch, car dies and I pull over. I figure...
I know this has been over so many times about eprom and non eprom ecu's. I have a 95' eagle talon tsi awd 5 speed. I was pulling out my radio to clean up all the wiring, I notice a sticker on the top of my ecu. I figure i'd check if it was an eprom or not. The numbers that were on the...
Ok, my car starts missing out and sounds like its running on 3 cylinders when im just cruising on the interstate going 70mph. It just happens radomly. I can drive around town and it'll drive normal. As soon as I get on a interstate and cruise at higher speeds it'll randomly misfires. So I...
I had a ebay type s bov on. It wasnt working, so I bought a hks ssqv. Yes I do understand I need to get a recirculation kit for it. I vented it to see if it worked. Well guess what, its not really going off either. I adjusted both nuts on both bov's as soft as possible. I got it to open a...
Im wanting to get a hks ssqv. I have the punishment racing fmic and intercooler pipes. It has a 1g flange on it. Im not really wanting to cut and weld a hks flange on it. I just want to try to get an adapter. I noticed the madzaspeed bov flange is very similar to it. Would anybody know if...
Does the transmission and transfercase have two different capacities? I'm in automechanics and having problems with my car at the moment. I found a drain on the transfer case and it got me thinking. I'd appreciate if you could help me out.
Thanks,
Alright, well i'm needing some help. I've had this car for a little over a month. Test drove it, clutch pedal was slow coming back up when you let off of it. I didn't think to much of it because it still grips good. Do you know what would cause my clutch pedal to come back up slow? Clutch...
I finally got a dsm again!:hellyeah: 1995 eagle talon tsi awd with a 6 bolt swap, 750 injectors i was told?, 14b, punishment racing fmic and intercooler pipes, and bov. Pushiing 9lbs, has stock intake and exhaust. (wierd I know)
Ok so my problem is that it has a high idle (1300-1500rpm). I...
I bought some NGK bpr6es plugs and NGK wires yesterday. Arent the NGK bpr6es plugs suppose to be copper? I open all the boxes of the plugs. Are the bottom of the plugs suppose to be different colors? Yes i'm a noob.:p I just want to make sure. Yes there all the same plugs.I just thought it...
Today i was cruising, I got on it and I ended up miss shifting from 3-4th, instead of going from third to forth I ended up missing and got into second. I know I know, how do I miss that, its straight down. But it happens i guess. When I accidently shifted to second the RPM's got upto around...
I'm wanting to paint my valve cover soon to add some color to the engine bay:D. I know how to do everything. I just need this one questioned answered. When I take off my valve cover will I have to put a new valve cover gasket back on? I've searched and couldn't find an answer to that.
Sorry if i posted this thread in the wrong section.My car is a 97 eclipse gst. Completely stock except for a ebay intake and a magnaflow muffler.
I put a boost gauge in about a week ago. It says im running 15lbs.
Idle:19 vac, when shifting: 25 vac, Boost:15lbs. When I turn off the car the...
Earlier today my friend asked me if I want to buy his old fmic. It's a xspower intercooler. He only asked for $50 for it so I took it. What do you guys think about it?do you think im going to have to take out my foglights for this?He pulled this intercooler off of his old civic...
my friends wants to buy this 1995 eagle talon tsi awd, it has 76,000. he's asking 3800 but my friend is gonna trade his 1999 Honda civic ex for it. its been sitting for a couple months, he took it to a machenic and got a new timing belt, water pump, and a new head put on it. he was telling me...
i was talkin to a guy about an eclipse gsx. he'd let me buy it for $400. its a complete car but minus the motor. he told me he has another eclipse to but its gutted but still has the motor and trans in it. he said he will give me both cars for $800.
do you guys think thats a steal?