Hello Everyone!
I'm rebuilding the engine on my 90 Galant GSX and need to find .03 over pistons and having a hard time finding them. Anyone have any leads on N/A Oversized Pistons. Thank you!
Hey everyone!
I was watching Hoonigans car reviews and saw the an electric S2000 that had an electronic brake booster. Anyone look into this? It seems straight forward. Just need to power the IBooster unit and your good. This might help the cars that have really low vacuum at idle.Link...
G4 Plus / VR4LinkSetup GuideWith this ecu being out for a while there is not much info on how to setup the ECU or what functions you have with it. This is can be difficult to setup if you have never owned a full standalone before. I hope this will help people get a quick understanding and a...
Hello Everyone,
Ive been trying to do some digging on my Galant VR4 Evo trans. It has 3.909 Final drive gears in it. How well do these work for daily/weekend driving? I know the Evo 1-3 guys go from a 3.909 to a 3.545 to get more top speed from what Ive read. I currently have a TRE stage 3 w/...
Hi Everyone!
I just finished checking the bore size, roundness, and taper on my 4G63 N/A block. I know machining a 4G63 you need a torque plate. Do you need to use a toque plate while checking the bore size and taper? Just though about it when I finally sat down to look at the numbers. Any...
Hello Everyone,
Im trying to figure out what my issue is with my car. At wide open throttle I am at .85 Lambda on E85. Im getting some really bad break up. Boost level is stock. Breakup is around 4500-5k. I attached a log. Car profile is up to date. any more questions just ask away.
Hey everyone!
My Galant VR-4 came with these coilovers. As far as I know the fronts are a custom setup and the rears are bilstein's. Any idea who would rebuild them or check them out? If I can get them rebuilt I want to put them on my Galant GS-X.
Hey Everyone I wanted to get a Dyno day/BBQ setup. Who would be interested? I know there was a post a couple months back and doesn't seem like much happened. I talked to Overkill Performance and we can do 10 cars that day. I figured around March we could do it to give those guys doing winter...
Hey Everyone!
Ive been doing some research for a couple hours and seeing if anyone might have a little more info. I have been looking at going to E-throttle for the purpose of anti-lag while keeping the car street drive able. From what Ive gathered is I can use a Bosch 60mm Throttle body...
I have a Link G4 and wanted to run a donut style knock sensor. Has anyone been able to find or use a kit that works? I'm not logging knock right now but would like to.
Hey everyone,
Ive been running the idea in my head to convert as much of the soft vacuum line to hard line. I was looking on the forums and couldn't find much on the topic. The goal is to have a cleaner look and have as little soft line as possible. I know this would affect tuning in that you...
Hello everyone,
I have a full set of Prosport Evo 52mm Gauges in Green/white. All working when pulled from the car 2 months ago. I have the Wideband, boost,oil pressure, water temp, and voltage gauges. All sensors and wiring are in good condition. I will take $350 shipped for them. Any...
Hey everyone,
Having a bit of a problem with trying to get the timing marks across the cam sprockets aligned correctly. Current setup is 2g head, hks 272 regrinds, and fidanza adjustable sprockets. I have tried to get them to align and either the inside marks are lower or higher than the...
Evo 8 Rear Diff InstallThe purpose of this is to go from a Viscous Coupler to a Clutch type. This is a fairly easy swap to do and it will take a bit of time. There are 2 ways of doing this.1. Leave rear sub-frame in and do the swap in the car.
2. Remove...
Hey guys,
Im new to tuner pro and read the how to article but still having trouble. The car already was tuned with tuner pro. How can I just plug my laptop in and look up the engine codes? Or will I have to redo the tuning process? Just got 352 on the road today and it starts to misfire once...
December 14th, 8am till Noon. Dreams and Drivers 1st Annual Karts, Kids and Cars Toy Drive at K1 Speed, 3130 Bradshaw Rd, Sacramento, benefiting the Leukemia and Lymphoma Society (LLS) of Sacramento .Bring your an unwrapped toy for the kids who are being treated for Leukemia and/or Lymphoma...
Wondering who's all still here in Sac. Maybe put a meet on some time? I'm about to have my car up and going in about two weeks and want to hang with some local DSM guys besides my buddies tsimage and tsiguy510 (if i remember right.lol)
Hey Guys,
Im looking for a few things to switch my galant to a 16g. things i need:
- Galant vr4 j pipe
- 14/16g/18g coolant lines going into the turbo
Im also looking for a few of the stock parts for my vr4. Any help on where there is a vr4 for parts would be helpful.
hey i have a aem wb 35-8460 and i have it hooked into pin 4 and i dont see the voltage cycling up and down on dsm link. Any suggestions? its a front mounted 02. my buddy and i have been fighting with this for the last few weeks any help would be greatly appreciated. I have looked through a lot...
Heyguy my buddy and i started a facebook profile that were going to turn into a car club. Just look up sac dsm on facebook and keep up with whats going on.:thumb:
So tonight I was diving home and I seen him turning on lemon hill from 65th and there was a evo7 if it was even a evo. It was debaged so idk. So I followed him since I could take that way home and he turn onto a residential street and seen his pillar guages. I reved and he slowed when he was...
Hey guys there will be up at a car meet at Lowes on Calvine and Power Inn (8369 Power Inn Road, Elk Grove, CA) over by Game Stop. Theres just some Hondas and drifters there.I want to over load the place with DSMs to show them up and not be the only DSM there. They start the meet at 7pm and go...
Hey guys I know there hasn't been a lot of activity for the Sacramento DSM scene but if you guys want there are car meets every Friday @ Lowe's on Calvine and Power Inn Road. This is a new car spot that has been growing. I know that Ive been going out there for a few weeks and Ive seen maybe one...
Ok everyone with either a 1ga or 1gb. Here is a quick way to make a quick upgrade that cost pritty much nothing. What we are going to do is basically change that stock orange gauge color and turn it to white. Heres how you do it.1) Your going to need a long handled screw driver to get the...
Hey guys ill be up at a car meet at Lowes on Calvine and Power Inn (8369 Power Inn Road, Elk Grove, CA) over by Game Stop. Theres just some Hondas and drifters there.I want to over load the place with DSMs to show them up and not be the only DSM there. They start the meet at 7pm and go until...
Hey guys
I was wondering if anyone wanted to join me in doing a photoshoot on friday. I really want to get some cool pix and have fun hanging out. Anyone interested?
Endless AutoWerkz along with DeJaVu SG and CC photography are presenting the biggest show to hit NorCal north of HIN. This will be the first of hopefully many shows/events that will be sponsored by the newly formulated Endless AutoWerkz.This event will be held at:DeJa Vu Showgirls
11252...
Whos going to the meet on saturday? i went last month and only 2 other guys showed up with me and my friend. i dont want to show up to a meet with no one there. and i will be bringiong my camera to do a photo shoot and i can do rolling shots.:thumb:
I was wondering if we wanted to do a major norcal meet or is there's a major meet going to happen soon.:confused: I would like the meet to be central to everyone so its not just all the bay area guys driving a few minutes and everyone else a hour or two. No offense. If anyone wants to plan...
i was wondering if eny of the norcal guys play on here and mabye sometime we should all get on and race and see how our tunes are and learn about our cars more. and im getting prittyboard of haven guys that dont know what there talken about. it be nice 2 meet some new people and meet up some...
The event is at endless motoring and it is a car show and they will have food there for u i think im going to check but it should be alot of fun we almost took up the entire paring lot last time and i was the only dsm. i want some more guys to come out and show off our cars. they dont have to be...
hey everyone. just wanted to see if enyone wanted to do a cruise down 49 or something. i want to start to do more cruises so we can have fun and tune and test the cars. we wont be going very fast we will be mainly doing the speed limit. anyone interested? reply back:thumb: IM me if you want to...
I want to do a major dsm meet this summer and have everyone get together. I was thinking Fairfield because it is a central location. I also want to do a cruise near Lake Berryessa so we can have fun and relax. I was thinking that we meet at Scandia family fun center. i was thinking around 10 am...
Date: Saturday, December 6thWhen: 7:00pm - WheneverWhere: Fry's Electronics - Northgate and I-80 In October the meet at Fry's brought a good turnout so it's back at Fry's again. Bring about $10 for food cause we will be heading to IHOP afterwards, just like last time. Fry's Electronics...
On friday im getting a new clutch to put in the car. i was wondering if enyone is available to help out. im taking the cluch out right now so i can go to napa and get it warentied then friday il have my new one to install. Thanks:thumb:
i was wondering if i would be able to build a n/a high rev motor?:confused: do you think its possible? i think it would be cool. the reason is is because i do tuoge and would like a naturally asperated motor because i dont like the turbo lag and the all of a sudden kick when i start to come out...
Ill be up there was wondering if enyone is going to be there. ill have my red 1gen dsm there. ill probly be parked by a fed dragster tryen to help him get going and watch him go down the track.:thumb: