Thoughts on the dyno sheet and the log I took yesterday on the street while in 2nd. I made 404awhp and 328TQ with 93 pump. 2.3L 6bolt, PTE 5557 bolt on housing, JMF Swim, Kelfords 272, 1050cc injectors, etc etcI thought I would see more TQ than 328
I put my GSX on the dyno and I'm having clutch issues. I have a new ACT flywheel, a South Bend Clutch, and when the tuner gets to 13psi on a 5557 about 3500rpms the clutch slips every single time while in gear. Stage 3 TMZ tranny, new oem tb, new slave n master.Any thoughts?
I just thought I would share some results of my Sinister Speed TCThe sinister speed torque converter compared to my old TC is giving me over a 2k difference without adjusting any launch controls on the foot brake. I didnt use my e brake yet. The sinister speed TC brings me to 3.5k instantly...
I just want to know what this sound is. I have a few thoughts but I want to hear what others think it is. This is a 6bolt swap in a 2g spyder 5 speed.http://s553.photobucket.com/albums/jj370/bigkc120/?action=view¤t=eddeb228.mp4
If anyone is near the Schenectady, NY area my father in-law opened a shop up. If you need help message me and I could help you out since I'm usually there. I have any tool we might need.
After I installed a 1g TB rebuilt, I got an idle surge and I set everything with the ohm meter. I was wonder was it the way I installed the vacuum hoses. The TB my 2g gst came stock with had only two vacuum hoses not three. I know it isn't the cable because I gave it enough slack. When it isn't...
I bought this off of tuners from a member that was close by me for 2k. I plan on keeping this simple with cleaning it up, small 16g with supporting mods, and even a few other things that I might decide on. Anything you think I should do, let me know your opinions. Here are some pics-
I was trying to figure out if I could use this harness for my gsx and if this is a 95-96 or 97-99 engine harness. The 99 GSX shell I got, harness was all over the place and they look completely different.
I'm looking for some new tires for my 2g GSX. I loved how the toyo proxes 4 felt on my honda when I drive it all season. I was wondering if the Toyo proxes R1R would be better then the toyo proxes 4? Would think handle better, stick better, etc?OEM rims 215/45/17
I have purchased a 1g 3 gauge radio bezel from slowboyracing some time ago. The bezel is wrinkle black with their logo on the bottom. The bezel came with 4 screws and 4 little pieces to help stablize the bezel in place. The bezel allows you to use 3 52mm gauges on the bottom and your radio would...
I was wondering which is better, the QTPs vs. M/H slicks? I have read that M/H is better than QTPs and I also heard that QTPs is better than M/H! How would one benefit over the other on AWD?
ok I have already ordered some parts and still making some choices, let me know what you think. Tell me if I should change somethings around or just tell me what you think about what im using.http://www.dsmtuners.com/forums/blogs/dwr-dsm/888-2010-gsx-build.htmlI already have these parts...
1991 TSI AWD 2.0L. Plans, make shy of 900whp with c16 and meth. I wanan make the v8s nervous when I come around :thumb:.(Shout out to SlowBoyRacing & TPG Tuning)This is a 2.0 motor, Manley Pistons .020, Manley I Beam Rods, Balanced crank, ACL main and rod bearings, Balanced shaft removed. 5...
I have put BC 272/272 cams with BC springs and retainers. I also have AEM cam gears. I wanted to get bigger and better cams with springs and retainers. I wanted to know which would you use for a build like mines. I was thinking about the Kelford 280/276 or the 288/280. Link is below to my build...
I have ordered a Cf hood and wanted to use the AeroCatch hood pins on the 1ga but I havn't seen anyone that install it and I wanted to know if it was able to be done on the 1ga since the pins is flush and the hood is different from the 1gb. I been looking for pics for a while b4 I purchased my...
I was wondering does anybody have a GT Fabrication 1ga CF hood or any of their CF products. I just wanted to know what you thought about their products and if they were worth buying or go with a different company?
I know this is the newbie area but this gets the most views. I have a list of some things I wanna do next, please do not go by my profile on what I have because if you name it, i more than likely have it:thumb:. I thought it was to much to list on my profile. This is what I'm looking to do next...
Already searched and found nothing about personal experiences with the Jay Racing Rear End Toe Eliminator Kit for the 1g AWD. Any information on this would be great before I would purchase them product. Thank you
Last night I was driving, everything was perfect with the car and all of a sudden the rpms just jumped up on its own when I was sitting at a light. I let off the break and my car tried to run away, so i pulled over and turned my car off. I was just assuming my throttle got stuck but it wasnt. I...
Here are some pictures of my head work. I had it done for very cheap and it looks and feels great. I will be installing it very soon. I can give you any contact information and price range if you would like, you can pm me because Im sure I cant post it on here.
Ok, I left base for one day to get my DSM for I can have something to drive at Fort Dix NJ, when I started my car there was a few problems. First my car wouldnt hold a charge so I changed the battery and the problem went away, I needed some gas because it was on E so I filled it up, and the last...
I made it back from Iraq a few days ago and Im still going to be stuck here until the doctors can find out whats wrong with my lower back and left shoulder. I seen some dsms from the 1G up until the new models out here. Im bored as hell in Fort Dix's and Im having my boy drive my DSM to me here...
I just wanted to let everyone know I will be returning from my tour in Baghdad Iraq finally going to see my family & friends. I came to Iraq when I just turned 20yrs old and Im leaving here at 21 with my Sergeant Strips already. If it wasn't for the Army sending me here I wouldn't of bought that...
I was wondering what shop you take or took your DSM to and what would you rate them on a scale of 1-10. Who helped you? & Who F%@* your shit up? Just want to see who got the best rep and service.
If I had a Stage 2 2.3L short block, all internals, and supportiong mods. What PTE turbo would you go with and why. Would you go with the 60trim or a 50trim? Would you port the inlet & outlet? Would you polish the compressor? Internal or external wastegate? Think of answering this as if you...
Here is a list of every mod I have so far, nothing is installed yet. Please tell me what you would order, do next, and why.:thumb:Stage IV Port & Polished Head
AEM Cam Gears
255lph Walbo Fuel Pump
AEM Fuel Rail
Weapons R Fuel Pressure Regulator/w Gauge
FIC 660 Fuel Injectors
Apexi 3...
I'm new to the DSM world and I would like to know if anyone is close to me (Staten Island, NY). It looks as if I will be coming home from Iraq by the beginning of next month because of some mix-up in orders. I have a ton of parts at my house and I was also wondering if anyone has some free time...
I can't decide on what turbo I should get, I have a 1G AWD TSI. I don't wanna get crazy, I just would like my DSM to run a 10sec without nos. I was looking into the MHI 20G or a ball bearing turbo from PTE. I believe I have every bolt on possible in my house waiting for me to put it on my DSM...