Pending Price: $2250Selling my 98 Talon Tsi for a very low price :( , had bought the shell from one of our members for $1k and have been working on it for the past year almost little by little, but unfortunately due to separation(divorce), I will have to sell the car cheap as I need it out of...
Well I have a VRSF Intercooler which am going to use on my little project and have a question.I am going to be running 3" stainless steel pipes which I will fab and weld at work.I would like to know if there would be any significant loss/gain in performance if I cut off the inlet and...
So I bought this transmission for my 98 talon tsi, but the guy told me I will need the part that goes here because the thread was stripped.Now I need help with the name and or part number if possible, Thanks in advance.Is the bracket that hold 1 of the shift cables and has the little...
I have been searching for a answer since yesterday but end up in the same posts without a specific answer, possibly am missing a term in the search query but please point me in the right direction on this one.I have a 7-Bolt Block out of a 93 gsx that I built for my project. Now that block...
Hello, So the other days I ordered a new set of OEM 7-Bolt Oil Filter Housing Bolts for my build from EXTREMPSI. Well today I went to install my oil filter housing and am having an issue, the bolts seem to be too short only 2 of them actually fit.The bolts I received are as followed:
2x...
--Pick this Shell/Car from one of our members here after having lots of rust/rot issues with my spyder which was bought as a project to build.
--This will be my build thread and yes will be slow build kind of, due to Time/Funds restrictions for the remainder of 2017.
--Any suggestions and...
Hello, I just bought this shell from a member here as my spyder had to be put to sleep due to rot. Well I was looking around the car today and notice some cracks behind the tire on the wheel well area.I would like to know how would be the best way to get this fix? also will adding a strut...
Hello and sorry for the question but, I have been searching everywhere for a Radiator Support for my Spyder and can't find new nowhere.Does nobody sell them anymore?I see everywhere they have the GS/RS support, but nothing for GST/GSX or in my case Spyder GS which am currently building with...
Where can I buy a F5M33 GST 2nd gear pinion? Was changing the synchros but the 2nd gear is pretty bad, I found the hub and slider in Jacktransmissions, which I also have to purchase. But where can I find the pinion itself. TIA.
This has been a very sour time, I had plans on finishing my car by mid june, had the shop already contacted to get the motor work done soon, then boom Ross took care of messing up.Order a set of Ross .030 Stroker pistons through MAP and had a month waiting for the pistons, which in part was...
Sorry for asking but haven't seen an answer to this question while searching, also sorry as it may be a dumb question but here it goes:Am getting ready to do this on my spyder which I just bought for that matter, but I have 1 concern.- Will I have any problems getting the car through...
Hey guy this petition has been in for a while but I thought I post here, Please all support is needed. Is to bring back CT Dragway, being that our closes dragway at the moment is nearly 2.5 hours away. Please If you sign the petition try to promote it elsewhere but let make this work, there are...
I recorded this at Waterford, CT in waterfod speedbowl which on fridays after 5 is turned into a 100 foot drag. The 1g is going to be the 3rd race in the video that thing launches fast as hell.100 foot drags in Waterford,CT - Car Videos on StreetFire
Ok guys, I searched and searched for this and nothing so here it is.Everything went fine in the swap until the electrical part.Here is my question- Where do I connect the clutch interlock wire?I turned on the car by jumping the starter with a wrench and everything is working fine...
I was browsing in craigslist yesterday and saw an ad for a 1994 ford mustang GT 5spd. I checked it out the car body is mint condition and has 17"cobras it was for $1500 I call the person up and it was a lady she said she was selling it because it was mixing oil/coolant obviously HG or Cracked...
I recently got this 97 AWD Talon from my sister-in-law but I always liked the 1966 mustangs.* So someone is interested in seeing my car on friday and if he likes it he would like to trade his 1966 mustang for the talon.-this is the description to the mustang: 1966 ford mustang, V6...
Hey guys I've been out for a while but just taking care of things you know. Well am back now and I have to say I finally got a AWD TALON, what's best of all I got it free from my sister-in-law.Well the car does needs work but thats why is going to be my new project, I need to fix the...
Hello guys its been A while I haven't been here but am I just dont have another DSM yet and hopefully soon I will find the right one. Any ways to the point of this thread.I'm trading cars with my father tomorrow.He has a 1996 mazda 626 Dark green and I would like your opinion in the color...
When I got the car the ex-owner told me it had a 14b but if I do have a 14b then why is my housing different than the housing from the 14b shown in the picture below. I try to check if my housing says anything but it doesnt have anything written in it any idea of what turbo is it I know it must...
Hey do you think this rims would look nice on a eclipse they are from a lexus, I don't know if they fit but if they do IMO they will look nice what you guys think. They were given to me so that I could sell them or do whatever with them so i recently post them on craigslist. they are 215/45 R17...
Hey guys I know this aint a honda, but a good friend of mine needs some help and was wondering if you had any answers or can point us in the right directions.His car is a 1991 honda accord.He bought the T25 setup w/injectors which I currently had on my eclipse which am parting out.
Now, he...
Hey, I know this ain't a honda site but a real good friend of mine has an accord and needs some help.I was parting out my eclipse and he bought my turbo system but have a couple of questions.He currently have my T25 turbo and injectors. He also have a P06 civic ecu which he's currently...
Hey everyone as you could see I no longer belong to the New England region and now I belong to the Tri-State since starting may I will be moving from CT to Jeannette,PA. Unfortunatetly I won't be taking my DSM since am selling it to have a little bit more cash in my pocket,but after I settle I...
Hey guy I havent been in the forums in a while but I've been busy. Now for the problem please read below and help me.:confused:-My car's turbo had shaft play in it so I knew it was going to go soon but before I could replace it, I was on my way home from work and the car started stalling and...
Hey guys I have a big problem remember my old thread about that my car was smoking, Well yeah I found out today it was actually the turbo is in real bad condition and some metal particles are flowing through the pipes because of it.I'm scared because is my daily driver and I really need it to...
The game is 1955 mafia battle, is online no need to download and is free. Its kinda hard to understand at first but once you read the rules and guides is pretty good. If you want to checked it use this link which is my referring link you might need to copy and pasted but after getting into the...
Hi guys me once again. I have two choice and want to choose a good one so am counting on all of you. My car is starting to mess up as I expected so here it is.Should I:First: Save up a few grands like 5-6K and totally rebuild the engine, and if I do it correctly expect at least 350HP...
I saw a PS3 network ID list and thought I'd do the same for XBOXWhat is your XBOX 360 user ID:Mine is : cano86 (Yeah just like DSMtuners) By the way you wont see me online until
December 4 since my xbox was shipped via UPS 7 day ground)I already have the...
This posting is to know who's from Pittsburgh, and to know if its a good place to live am looking for opinions since am planning to move there most likely by next month so Any Opinions are Welcome?!thank you
Am posting this because on route 72 which connects to the highway 84West toward Cheshire/Waterbury there is what it seem like a stolen or abandoned (White 1G AWD) its just sitting there with no license plate and the window is down or broken.If it was stolen the car was still there this afternoon.
Sorry for probably a stupid question but here it goes if am going to use (The BURN1 Flash-n-Burn USB-Based Chip Programmer [Model: BURN1]) Do I use the chip in my ECU or do I have to buy a specific chip please help me on this one thanks.The Burn1 is a revolutionary device that was designed...
What you guys think:thumb:YouTube - traidor vs. suzuki amarilloYouTube - chezina vs. el mostroPlus check out their turbo, They will show it after he flips overhttp://www.youtube.com/watch?v=8KLSw5ttPuU&feature=related
This is going to be The color in my engine bay.GREEN. This is how is going to be:
Valve cover-green/polish letters
coil-on-plug ignitions-green/black
intake manifold-Flat black/polish throttle body
GM Maf-black sensor/green couplers
polish piping
Hoses are going to be steel braided...
I checked the spark plugs in my car and they are NGK but instead of saying BPR6ES they say BCPR6ES does this matters or are they the same thing.Some help will be appreciated
I want to know if anyone has tried making their plate out of acrylic ### I was going to make one in steel but in the basement all I found was a thick sheet of acrylic around .5" and thought it'll look nice since am painting the valve cover dark green if anyone has pictures of one done in acrylic...
I have an Apexi 3.5" exhaust piping which I had to cut to install a cat for emission now I was wondering is it good to leave it on or is it better to remove it thank you for your opinion