Hey guys need a quick answeR. Im doing my clutch today and i need some advice. The last time i did it i put a new flywherl on it. But i spripped a couple of the bolts. Well i had a couple 1g bolt bolts laying around and i used them. So i have like 4 or 5 2g bolts which are 17mm and like 2 6...

Firat odf I would like to apologize for posting here because I never seem to get responses anywhere else.Anyways I'm about fed up with going through clutches. I have stripped the center hub splines out of 2 XTD STAGE 4 UNSPRUNG disks in about a year and a half.So basically I'm taking...

So about a year and a half ago i decided i need to upgrade my clutch being as i was running a stock one with over 300HP. So i need alot of research and i decided to go with XTD Stage 4 unsprung 6 puck. Well i had about 3k miles on it and i'm riding down the highway and all the sudden my car...

So guys I have searched as best as I can and I have not been able to find anyone That has had the same problem as me so maybe you guys can help. Here we go. I was driving home the other night when I notcied out of no Where it was extremely hard for my car to get in gear. I figured it was my...

So a couple months ago my car sounded like it was knocking but it wasn't when I would push my clutch in noise would stop so I thought my throw out bearring was going bad well today im driving I get on it a little and my car revs up and like I hit a wall. Well now with my car on I can move...

Hey guys getting ready to have my keydiver remapped with an anti lag setup. Just wondering any advise of timing values for me to build between 10-15 psi off line, sound good and look good. And should i mess with my base fuel pressure? Any other values i need to know let me know. Thanks in...

Recently i went to get in my car to drive it and i could not get it in gear. Well its weird because its not loosing clutch fluid and the clutch pedal is still hard. So i thought that possibly something was going on with the throw out bearing or something like that. Well i pulled the trans and...

What should my timing and fuel be to build to build about 10-13 psi off the line and to have that loud nice 2step?

So researched a little and it seems ike no one else has had this problem. Last night i went to slam 3rd gear and i heard a pop. i thought i missed 3rd, well 3rd is not there you can take it in and out with the clutch released and nothing. Same with 4th. So i stopped at a light, went to take...

Lets start out by saying i bought this 93 eclipse gs n/t for 120 bucks clean title and everything but doesnt run right now.. I need some help i have a few concerns but lets start out like thisBasically i bought it off a friends friend... The story he told my friend is same story he told me...

Just had my head rebuilt about a month ago and just now getting in here for some advice after alot of research. I went with bc 272s manley springs and retainers and a 3 angle valve job. Well put everything back on and received my keydiver chip from dsmchips for my new setup. Well for some...

I'm running BPR7ES on bout 20-24 psi... What should my gap setting be. also on a fully built head with 272cams if that means anything too

Ok here is the run down. This car is for sale and the title of the thread speaks for itself. I just want some of your guys' opinions.It's a 98 gsx clean title with 108k miles. Needs both front fender and spoiler. Hood is green and front bumper is oem primer. So definately the car will...

Ok well i'm ready for some more power to my dsm. I just ordered from slow my titanium manley valve springs retainers and locks. also i have now arp head studs and cometic head gasket. I also am using BC 272 cams.Now i'm having the head completely cleaned ported and polished and a 3 angle...

Well it's time for a clutch now something more meetier than the stock one. For a while i have alwys used a stock clutch. Well after my front mount and tranny install i went back to the track and was amazed the power the front mount made me and that it was just too much for stock clutches...

Ok this is ###### the 3rd time ive pulled this tranny out and putting it back in.. This time it is killing me, and i dont understand what im doing wrong...i spent 2 hours with 3 people trying to get the tranny to clear teh frame and everything and i could not do it. The closest time i had i...

Ok look i just broke my 2nd transmission and i'm in a dilemma. I am going to be getting a stage 3 shep tranny so i already have the tranny. I'm still running a stock 7bolt motor. Eventually later on i'm doing a 6 bolt swap, so of course i'm going to have to change out the bell housings for...

Well guys need a little newbie help. I'm redoing my carpeting and maybe interior if i can find the stuff... I wanna do a black leather interior conversion. Of course i know if i can find my car ina junk yard with black interior it will be so much easier. But as carpeting im going with jet...

Ok guys my front tires are about ate up because of a bad alignment issue i had... now it is time for some new rubber. But the thing of it is i love the look of a nice wide tire in the rear. Now the rims i have now are not staggered or anything but i still wanna put a wider tire in the rear...

Can anyone explain the proess to me, i researched on the forums and everything is vague. i bought it off a friend brand new but he lost the instructions. So i have to weld a new spot in the exhaust for a new input for this sensor? Then connect the hot and ground. But what about the white and...

Finally i got the money to get my car in the body shop. I was originally just wanting the body work done and a complete repaint. But i love the color of the blue supras. Its a Royal Sapphire Pearl that im repainting the car. Look up the color guys and tell me what you think. Should be done...

I want you guys to comment and tell me how you think my car is running.. Went to the track the other night and ran best time 13.8 anywaysMy first run on 14psi ran a 14.2 with a 2.1 60 foot. I bogged real hard. Anyways i pulled over changed my plugs cause they needed it and then ran a...

Ok ill start here. Probably 2 months ago i went to make a u turn in the middle of the road and the driver side of my car just dropped to the ground.. The lateral control arm ball joint popped out, also when the car fell it broke that side axle. Long story short i ended up replacing that axle...

I recently broke off the handle to my dipstick and i cant get the dipstick out so i'm going to have to take out the dipstick holder. I see a bolt that is holding a bracket that is welded to the holder to the block. I took that out and it wont come free. Is there anything else holding it in...

Well just got some new parts in and some installed! Just bought Greddy type RZ bov. Installed it sounds great! My AEM wideband but havent got it on yet. But the biggest thing is my megan racing 32 way adjustables!! I cant wait to get them on.. I started to try and do the front but i was...

Well the TurboXS MBC works great! holds pressure and raises boost as i turn knob.. Well i kept pumping boost up and noticing there wasnt a difference in power. I got all the way up to 16, went to make a 2nd gear pull and my knocksum gauge which is my stock boost gauge and each division on the...

Well just wanted everyone to know i got my kevdiver chip with eprom and WORKS grea. Now its time to raise the boost to where i want it. Just quick question i have a mbc that im confused on. If someone could tell me exactly how to wire this one that would be great. Picture of the controller...

Well i put some funds together and i got about 600 bucks for now to mess around with.. i have a set of 550 injectors and im looking to boost my 16g up hopefully between 18-20. im not looking to spend the money for a tune so hopefully i can pick up a eprom chipped with a keydiver.. And if so...

I'm running BPR6es in my 99 gsx 16g running off the wastegate at 10psi.. What should be my proper gap setting? Also should i try running different type of plugs? Ive been noticing a lack in performance and if i remember correctly the last time i changed plugs a fellow dsmer said they came pre...

Well on way home from work today when i put my car into 2nd gear and my shifter was real wobbly still like it was in nuetral. Didn't think much of it until i came to a stop let out my clutch in neutral and car stalled. I could not get the car out of gear, but the shifter was moving all around...

Just a quick question. Running stock 10psi with stock fuel setup. Looking for advice on the right wires for my setup. Having a small sputtering problem and getting ready to do tuneup. I'm going to run BPR6ES plugs again, but i would like a good set of wires. Thanks

Ok i have noticed this since i got the car back in june but recently it started getting worse. When i'm in reverse and ONLY when i have the wheel turned sharp, as i back up there is this loud repeatedly clanking/thuding noise coming from the back of the car. It's really scary quite frankly...

Hey guys just wanted to let everyone know that im getting ready for a build as soon as taxes get here but i wanna get idea of EVERYTHING im doing. I have idea what im doing with bottom end already. I think im going to with stock bore with forged interals all the way to main bearings. But my...

So there is another gsx down the road from me just got traded in. It's red with a fully built 6 bolt in it. The guy that had it was almost pushing 400 whp. They only want 6500 for it. It's a 97. What do you guys think about me trading mine in for it ?There is this 97 gsx i'm looking at...

About a month ago i started having problems with my clutch master. I just kept putting fluid in it until i was ble to change it out. Well it started getting worse and worse the leak that is. A couple times i let it get too low to where i had to re bleed the clutch. Now, mind you when i bled...

Anyone use any of the ebay hi flow cats they sell on there for like 15 bucks? If so how are they. If these are not good anyone know where i can find a cheap one? Preferrably direct fit if not a universal is fine. I went to local exhaust shop and the universals they had would not fit my car...

Ever since i got the car i've had a problem with this and it is really annoying. My gas gauge works.. but acts weird. For some reason the empty is the quarter mark. I'll fill the tank up and it goess all the way up. Works fine and then around quarter of tank the fuel light comes on. Another...

Just hooked up my new glowshift oil pressure gauge. I'm getting between 8-10 psi at idle. 30-50 when just casually driving. And when i go WOT it goes to about 80psi. Does this sound somewhat normal? Too high too low? Running a 16g btw.

Well first time at the track last night and broke already. I went to grab second gear and my shifter came out in my hand. I thought maybe it was just the knob but i tore the bag off and it was the whole assembly. basically the bolt that holds the vertical shifter shaft is broke. Luckily...

Ok guys after researching the engine codes p170 and p125 the anything left is fuel pressure. I have a feeling this is going to be the fix because my car is running super super rich. So for now since i have nothing done to my ecu or any tuning software yet im going to bypass the adjustable fpr...

OK tonight im on the way home from the girlfriends house and the weirdest thing happens. Turned onto my road and i stepped on my carfrom 1st to 2nd and 3rd. As soon as i hit 3rd i looked down at my cluster and my brake light and battery light is on. Then i noticed my power steering was not...

Keep getting check engine code P0125 and P0170. The first code is coolant temperature sensor and the other one is fuel trim malfunction. Did a research and someone said it could possibly be thermostat. Change that. Someone also said it could be the coolant temp sensor. Changed that as well...

Well since i got the car i haven't really messed with it on the street too much. Well got my exhaust leaks and everything fixed today, and i went out with a few buddies on the street to mess around. Everything was fine car is boosting good everything is running strong. Went to back out of a...

Well just got the call from the exhaust people saying that the high flow cat that they have there that they are trying to put onis too big. The inlet and outlet are fine 3 inches. The diameter of the barrel on the cat is too big to fit on the car. Does anyone know of or have a small barrel...

I have a 1g motor that i am stripping down atm and i'm going to rebuild it forged internals and everything. My buddy has a rebuilt 1g with stock turbo internals nothing forged tho. Rebuilt head with BC 272s. He wants my civic that i have and he is willing to trade me the talon with the motor...