The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support ExtremePSI

Search results for query: *

  1. dale187

    Flywheel bolts

    Hey guys need a quick answeR. Im doing my clutch today and i need some advice. The last time i did it i put a new flywherl on it. But i spripped a couple of the bolts. Well i had a couple 1g bolt bolts laying around and i used them. So i have like 4 or 5 2g bolts which are 17mm and like 2 6...
  2. dale187

    clutch/drivetrain situation

    Firat odf I would like to apologize for posting here because I never seem to get responses anywhere else.Anyways I'm about fed up with going through clutches. I have stripped the center hub splines out of 2 XTD STAGE 4 UNSPRUNG disks in about a year and a half.So basically I'm taking...
  3. dale187

    clutch issue need suggestions

    So about a year and a half ago i decided i need to upgrade my clutch being as i was running a stock one with over 300HP. So i need alot of research and i decided to go with XTD Stage 4 unsprung 6 puck. Well i had about 3k miles on it and i'm riding down the highway and all the sudden my car...
  4. dale187

    Clutch master cylinder replacement. Is there a best one

    DO NOT get autozone one... for whatever reason their adjustment rod is about 1/4 inch shorter than OEM and youll have disengagement problems all day
  5. dale187

    weird clutch pedal/master cyl problem

    Guys. So I went undress the car and I think I know whats going on. When I have the rod out ok far I guess it pushes unto evenly. But I have to have it out that far to get enough thrust to go into gear smoothly. Well I adjusted it in to wear it engages decent but my clutch is lower than my brake...
  6. dale187

    weird clutch pedal/master cyl problem

    I think maybe my post is a little confusing. Its my master cylinder rod that's messing up. And its not bent its just I guess When I push in the clutch it does press straight so where the rod screws into he back of the pedal it flexes up. In result pulling that bushing out some what and making it...
  7. dale187

    weird clutch pedal/master cyl problem

    So guys I have searched as best as I can and I have not been able to find anyone That has had the same problem as me so maybe you guys can help. Here we go. I was driving home the other night when I notcied out of no Where it was extremely hard for my car to get in gear. I figured it was my...
  8. dale187

    weird trans problem need quick help please

    No v8 your not understanding it reved up because it essentially fell out of gear. It'd almost like the clutch is constantly being pushed in but its not then when I push it in and try and put in gear it whines and is hard to go in. But it still wont move. Even with car off and in gear its not...
  9. dale187

    weird trans problem need quick help please

    I thought That maybe but why can I go in and out of gears with car running and clutch out but with clutch pushed in its hard
  10. dale187

    weird trans problem need quick help please

    So a couple months ago my car sounded like it was knocking but it wasn't when I would push my clutch in noise would stop so I thought my throw out bearring was going bad well today im driving I get on it a little and my car revs up and like I hit a wall. Well now with my car on I can move...
  11. dale187

    1999 Mitsubishi Eclipse GS-T Part Out

    what color interior and how muvch
  12. dale187

    anti-lag

    Yea your right but i'm all prepared. I have upgraded clutch running evo iii 16g and 272 bc cams. Soooo the big question what do you launch at and at that point what are you timing values
  13. dale187

    anti-lag

    Hey guys getting ready to have my keydiver remapped with an anti lag setup. Just wondering any advise of timing values for me to build between 10-15 psi off line, sound good and look good. And should i mess with my base fuel pressure? Any other values i need to know let me know. Thanks in...
  14. dale187

    weird clutch problem on my 1g n/t

    Air in the lines ? Lol i mean anythings possible but i bled that thing no lie atleast 30 times not even exaggerating.. Another thing i did notice, when it was in working condition, whenver i pressed the clutch in it felt like it was hitting a wall like an inch from the floor.. And if i pressed...
  15. dale187

    weird clutch problem on my 1g n/t

    no it keeps consistent pressure and what was funny before i went to pull the trans if you pressed in the clutch almost stalled the car and there was a like knocking sound even when the car was in neutral. im going to role out the shift cables because if i push the shifter hard enough it will...
  16. dale187

    weird clutch problem on my 1g n/t

    Recently i went to get in my car to drive it and i could not get it in gear. Well its weird because its not loosing clutch fluid and the clutch pedal is still hard. So i thought that possibly something was going on with the throw out bearing or something like that. Well i pulled the trans and...
  17. dale187

    Got a 99 gsx what now

    Nice pick up.. What did you pay for it? Brings back memories when i picked up mine almost 2 years ago. June 26th will be 2 years! bought it with 76 its got 102k on it now and been a long way
  18. dale187

    Before / after!

    Hands down dude.,. you are the man
  19. dale187

    How is this possible???(Compression)

    That's whyu you need to read tutorials and do everything yourself.
  20. dale187

    For Sale 97 GSX part out

    what coor interior? and condition of trans if its 5spd
  21. dale187

    possible OC meet June 5 and 6??

    Sigh guess there is gonna be no nice sounding 4g dsms down ther, only raspy civics and big diesels =[
  22. dale187

    possible OC meet June 5 and 6??

    WELL unfortunately i probably wont be in my car becasue i blew my 3rd and 4th. but i will try to make it down there in something maybe my buddy's 240. GTO i'd like to see your car if you wanna meet up on saturday
  23. dale187

    Best 3 inch exuast setup

    my setup is 3inch megan downpipe and 3 inch apexi n1 all the way back no cat. Sounds good at idle, little quieter at lower rpms but amazing at WOT
  24. dale187

    building boost off the line

    What should my timing and fuel be to build to build about 10-13 psi off the line and to have that loud nice 2step?
  25. dale187

    2G transmission problem no 3rd or 4th

    yea i have no idea either man. Tired of going through trannys
  26. dale187

    2G transmission problem no 3rd or 4th

    So researched a little and it seems ike no one else has had this problem. Last night i went to slam 3rd gear and i heard a pop. i thought i missed 3rd, well 3rd is not there you can take it in and out with the clutch released and nothing. Same with 4th. So i stopped at a light, went to take...
  27. dale187

    possible OC meet June 5 and 6??

    So the show is righgt around the corner who all is still planning on going down and meeting
  28. dale187

    new member for the dsm family and my driveway 120bucks!

    Ok guys got the motor pulled out and stripped. Found out it was #4 cylinder bad rod bearing.. That's way it only had 120psi compression. Anyways, i'm kinda confused about something. Remember how we all figured it had a turbo 2g in it? Well i was investigating the block and there was no oil...
  29. dale187

    fuel pump install...now car wont start? ebay FPR q as well

    First thing first make sure the fuel pump is pumping.. On the end of fuel rail pull the fat hose off and have someone turn the car off. If gas flows out the fpr then its pumping fine. I would start with the simple stuf
  30. dale187

    new member for the dsm family and my driveway 120bucks!

    Or a 2g trans, but thats the least of my worries right now. My thing is getting this motor straight with as little money as possible, so that i got still an extremely cheap beater. But dont wanna put too much into it incse i decide its not worth it and part it out. I'm going to drop the pan...
  31. dale187

    new member for the dsm family and my driveway 120bucks!

    Ok even if there was soemthing wrong in bottom end like a wrist pin broke loose or rod broke loose u wouldnt have compression correct?
  32. dale187

    new member for the dsm family and my driveway 120bucks!

    Well guys i did alot of tinkering today... Got the car to fire up and run. Had bad plugs, i pulled the plugs and there was so much fuel, it was not igniting so i took the plugs out and cleaned them with sandpaper and the car fired right up. Only problem is there is somewhat alot of noise bottom...
  33. dale187

    new member for the dsm family and my driveway 120bucks!

    Ok guys got out there today... Checked the timing, timing is dead on... Not even out a tooth... Just looked it because of where the cams sat... Went out there went to fire it up, wouldnt stay running, wouldnt even idle unless you give it gas, but it would not rev up... Now also it seems like...
  34. dale187

    new member for the dsm family and my driveway 120bucks!

    my uncle jumped teeth twice and bent valves in 2 dsms and pistons were fine.. i hope thats the case....
  35. dale187

    new member for the dsm family and my driveway 120bucks!

    Ill do that habitatguy, thanks... Ill tell you what would that be why it turns over a little slow and then turns fast and tries to start? I have a spare head i can use and reseat the valves.. I'm sure thats probably all it is so i should have this car running with maybe another 100 or 200 bucks
  36. dale187

    new member for the dsm family and my driveway 120bucks!

    That's what i'm saying so do you agree that that is a 2g turbo block? Since there is no where a bolt would thread to the BLOCK for amount?
  37. dale187

    new member for the dsm family and my driveway 120bucks!

    That is the first imma do is put it in time and turn it over do compression test... See if it bent valves
  38. dale187

    new member for the dsm family and my driveway 120bucks!

    Lets start out by saying i bought this 93 eclipse gs n/t for 120 bucks clean title and everything but doesnt run right now.. I need some help i have a few concerns but lets start out like thisBasically i bought it off a friends friend... The story he told my friend is same story he told me...
  39. dale187

    3rd Annual Northeast DSM Meet- MARK YOUR CALENDARS

    can someone please pm me address?
  40. dale187

    Cecil County Dragway

    i ###### wont be going now... played with my car all day yesterday and cant figure out way my car is breaking up.. Waiting for my logger to come in
  41. dale187

    Cecil County Dragway

    How many of you guys still going? I would like some help with my dsm too before we go got an issue trying to work out with my car breaking up.. shooting for mid 12s.. anyone in the delaware are let me know... i'm about 45 minutes from the track
  42. dale187

    3rd Annual Northeast DSM Meet- MARK YOUR CALENDARS

    I'll be there but will need directions...
  43. dale187

    car breaking up after fully built head

    Just had my head rebuilt about a month ago and just now getting in here for some advice after alot of research. I went with bc 272s manley springs and retainers and a 3 angle valve job. Well put everything back on and received my keydiver chip from dsmchips for my new setup. Well for some...
  44. dale187

    Stolen dsm in newark de.

    I seen a clean ass one earlier couldnt tell if it was eclipse or talon if i see it again ill keep a look out... I'm from dover
  45. dale187

    possible OC meet June 5 and 6??

    I go almost every year.. I was there lst year both times cruising all day and night... I'll be there
  46. dale187

    quick question on spark plug gap

    I'm running BPR7ES on bout 20-24 psi... What should my gap setting be. also on a fully built head with 272cams if that means anything too
  47. dale187

    time for more power. would like some advice

    So i got my cams out of my car and i was noticing something.. I noticed the cams i have (bc 272s) are for a 1g. But i was told that everything from a 1g head to a 2g head was interchangable. But on the one side of the intake cam where the CAS threads into the cam the cam doesnt have threads...
  48. dale187

    98 gsx 300 bucks

    I think thts the guy's intetntion to begin with was to sell it to someone to do awd swap. but since i have my 99 gsx i would just fix it up for a beater. Gives me a break from my car ;)
  49. dale187

    98 gsx 300 bucks

    Ok here is the run down. This car is for sale and the title of the thread speaks for itself. I just want some of your guys' opinions.It's a 98 gsx clean title with 108k miles. Needs both front fender and spoiler. Hood is green and front bumper is oem primer. So definately the car will...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top