:mad: man I cant find reasonable quote here to ship this motor. Anyone know what this thing weighs, or who to ship through?

OOOK, here we go,first, yes, I searched, and they all had the same thing but did not answer my question. I want it so the pop up function is only controlled from the pop up switch.Well, I did the mod where you remove the diod form the passenger side kick panel. But when you do this the...

Trying to get hold of GsxKydd . He paid for some valve covers, and instead a ECU was shipped to him by mistake. I am out of town and the GF has been doing the best she can to send out al the parts. According to the tracking number he has recieved it and I have not been able to make contact with...

So I was thinking of selling my DSMLink. Cause I am not sure when this car will be back on the road. I have not Even used it, just loaded the software on my labtop. But I am wondering is there anything I should know as the serial number is in my name ect. Anyone know anything about this? :sosad:

Kinda cool. I am doing a VR6 swap in my GTI and came across thishttp://thegreenfiles.net/rubbercityrally/a2vr6.wmv WTF

lol

Ok, I am looking for this video of a turbo Mustang build. Has some track shots in it and is set to the music of Adema, and the song is "The way you like it"

Anyone know if these are an alternative to ACT? Wonder if they have the clamping force needed for a DSM.

Well, I have ben out of the DSM game for a while now. Went through some hard times and now I am getting back on my feet and getting the tsi up and running. Well, I have been searching the frum, and looking at turbos and , holy crap! I cannot believe the large spectrum of turbos. I am at a loss...

I take it this isonly doable with stand alone of some kind correct?

Jason and Steve Cobb faxed this to me today. I like the fact this is power to the wheels, and sure as hell is something to be proud of. Damn good job guys :thumb:

You guys will like this... http://msnbc.msn.com/id/5756809/Bear downs 36 beers, passes out at campgroundRainier, not Busch, the beverage of choice for thirsty black bearThe Associated Press Updated: 7:26 a.m. ET Aug. 19, 2004BAKER LAKE, Wash. - When state Fish and Wildlife agents...

LOL :laugh: Ok, Dustin must have been real bored when he found this one. And just like him, I am not even sure what to say. mm I can say is whoever did this is going to hell for building such a monstrocity http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=2487210730 :barf...

Ok, so I just finished my DSM video Mexican Bus. Prob is, the size. Vid is about 3 mins long and like 35.9 MB (37,709,224 bytes)!!. So, I am not sure how to compress it and keep quality. I was thinking of loading it so you can DL from winmx and having someone help me... who's with me?

what do you some of you long term users think, and feel about your o2 dump...you like them and where did you get them?

Ok, so I have a freinds 98 Spyder here and he had a 1g head installed by his mechanic. Well of course it was only running on two cylinders. Well he had the 2g CAS on it. So I installed the 1G CAS and am now in the same boat. It is running bad and 2 of the cylinders are misfiring. Anyone else run...

LOL oh man. SO if anyt of you know me, I work for Snows Auto. You would also know that we built a 2000 Subaru 2.5 RS. We threw a turbo on at and stand alone ect. This is our shop car we use to show off some of the things we do. I have gotten the car tuned pretty well so thar with a full...

So I was trying to get a tranny for a car I have here. The guy that sold it to me said he would ship ect ect ect. U paid him the $600 and within a few weeks he stopped contacting me about it. So I filed a claim with paypal, and for the most part I am SOL. Sucks because everyone I have met on...

I was looking at the vfaq and the fog light mod for the 1Gs. Thus allowing the fogs to come on regardless of other lights, and as long as the ignition was on. I was wondering how come we could not just find somethin under the dash that was ignition controlled, and run a jumper to the switch...

Anyone have any ideas that do not cost an arm and a leg?

http://www.extremefunnypictures.com/es-items/405.wmv

Man these look cool. I know there are pannels out there that have openings byt the stereo, but this DIN mounts are direct. Defi gauges are too spendy for my tatse but still cool. Like I said I wish Autometer made somethin like this. Until then I guess I will have to get the mounts from Extreme PSI

Well I am thinking i might get rid of the supra sidemount. So I have been looking around at front mounts. I know that bigger is not always beter. So I am curious what everyone is running? I spent alot of time in the Galleries and seen some cool stuff though. So 1. What cooler do you have...

So I finaly made it over there. I had a hell of a time finding the shop. I walked in and met Andre. Before I could shake his hand, the 5'6 man looked up at 5"11 Jessica and asked in broken english "how much for the girl!?" I stated I was Patrick from tuners and wanted to have the caps on my ECU...

I took a pic of me mooning the cop, but it turned out bad. I tored talkin to the cop, but he was a dummy, really. I was on my way back from PINA Motorsports, heading a backway to Spokane. I was passing through this town and saw this fake copper "Sneaky sneaky sir" :p

Ok, freind brings his car over and say he thinks he blew the 2100 he had in there. So I drive the car and it feels like a FWD. I get underneath and I can pull out the drivers side rear axel from the pumpkin, without unbolting anything . And thwere the splines are it is snapped in half. And the...

I was looking into gettin somea vent gauge bezel for my TSI. I wanted to make room for my tach near the a pillar. But I have been thinking that m with the heat or AC on, the gauges would be subjected to kinda a harsh climate. anyone know anything about this?.Also, how does the bezel stay in...

Well. stupid ass ,me. I lost a $100 bill. I went to pay for my saran wrap at the store and noticed $100 missing. I was freaked cause I have to ship a dash and a bumper and the buyers have beeen more than patient with me. So I looked around and came up with nothing, searched everywhere all...

Wow, i was talking to Jeff at DSMchip and I was telling him how I could not find anyone to socket my ECU. He informed me about a shop that could do it hee in WA. So I called the number and talked to Andre at PINA motorsports, and come to find out. This is a full blown DSM shop. The guy was damn...

I have been looking around and , it seems the DSS kit is a arm and a leg. And the taboo one doesnot look too complete. Any Ideas? :)

Ok 1G guys, I have done some searching and came up with "some" results. But I wanna know what setup you have ben using, and are happy with so far. I do not want to turn this into a debate ect. But post what ya like and dislike. And vote for what you are using :thumb:

I was kinda wondering if anyone had encountered any problems when tuning with a dual stage boost controller. Seems to me the WOT tuning would be so different that on either low or high boost it would not run right. Any opinions? :thumb:

Ok so my brother is looking for a 1g DSM, but he has a little prelude he got at a auction and needed some interior stuff. While on our way to F2uning we swung into a wrecking yard called Pull-n-Save. We pay our dollar and sign the waver and are soon poking around. We did not find anything for...

i found me a four bolt reat end, but i need to buy the right size socket to take off the rear cups, that bolt to the axels. Anyone know what size it is?

when this happends you could end up like this guy. What is funny is read the description [http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=4146756343 :laugh:

Is there a way to tell a difference between a small 16g and a big :confused: 6g?

Well I was thubin around the mag section at the book store. And what did I see? Was flex a lite or spal that makes a direct bolt in fan kit, just like the 2Gs use. I will find mor einfo and post it in here. Supposed to be a direct fit, plug in afair. More turbo room!:thumb:

Ok, I wanna see what dump tubes everyone is using as I am loooking to buying one. I just saw some horror story of the guy who caught his engine harness on fire. From what I saw on his it was dumping right on the cross member, you could even see where it took paint off ect. So I am sure it was...

Ok, I was searching on the DSMchip so i can use a stutterbox. But I see alot of stress placed on making sure I used a good electronics guy to use to socket the ECU. Problem is, everyone would say they could do this, if they knew they had never done one before. So does anyone know who to use to...

Well, I was busy hacking away atthe eclipse with the sawzall, when jessie stopped by and dropped off "Sony Vegas" for me. I sat down in front of this not having a clue what is going on. 3 hours later my vid was done. All but 15 seconds of it. Reason being I want to put in text ect. Anyone that...

All you need to do is get a saw, cut off the front end of your car. Undo all the bolts to the suspension and engine cradle. Then just undo the side motor mount bolts, and ABRACADABRA!, your motor and suspensions comes right out. Now as for getting it back in, you are on your own:laugh:

ok so do I use the Aeromotive A1000-6 Injected Bypass Regulator, P/N 13109or theA1000 Injected Bypass Regulator, P/N 13101?

how hard are these to install? What wires are hooked up ect?

:laugh: lmfaohttp://www.dsmtuners.com/forums/showthread.php?threadid=112543&goto=newpost

:D OMG, I just got home. I went to go get my GF from work. I was on this main street that is 3 lanes each way. I pass this little K car, and as I do a girl was like eyeballin me and smiles as I go by. I smile back and t get in front of her, then I move into the turn lane. So as she is passin me...

Well, here I am looking to making a vid. I am wondering what all I need as in, what type of cam and what type of software for editing ect. All the stuff I have done was done on older vids from ages ago, and I have never used a computer for editing. Any insite would be of huge ass help!:thumb:

:D I was proud to deliver this healthy, bouncing, ported EVO 16g to the owner "rjgst". He is very proud! Nurses say it apears the little turbo is healthy and willing to push lotso boost. Congrats RJ:thumb:

Well, here in the state of WA, if you get pulled over on a suspended lisc. They can impound your car, and put a hold on it. So it would have to stay there for 30 days or longer, you then would be responsible for the imound fees. And at about $45 a day, it can get spendy. As it turns out, some...