The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Rix Racing
Please Support ExtremePSI

Search results for query: *

  1. Blaze4G63

    extreme psi problems

    Has anyone had any problems with extreme psi customer service besides me? I ordered an OEM clutch master and slave cylinder from them on MAY 5th and received it and it was bad right out of the box and they said they sent it back to MHI but its been over 3 months now and nothing! For as big as a...
  2. Blaze4G63

    oem clutch master problem.

    so me and a buddy installed an oem clutch master and slave into my 91 gsx and i adjusted the rod almost all the way out of the pin flange and it still doesn't block off the slave we can still push the fluid back. I twisted the rod towards the pass side and went even as far as un threading it out...
  3. Blaze4G63

    Clutch right off floor

    Just installed a oem slave and master and it's still off the floor and also the strange thing is I adjusted the master almost all the way out and the master doesn't block off the slave when you twist the rod almost all the way out were it almost comes out of the pin slot any reasons why it's not...
  4. Blaze4G63

    1G bad obd1 port?

    yea im just waiting on my ecu to come back from ecmtuning now.
  5. Blaze4G63

    1G bad obd1 port?

    When i try to connect it says no response received.
  6. Blaze4G63

    1G bad obd1 port?

    So I got my car running again and my dsmlink wont connect to my computer. I sent my ecu to ECMTuning and they said everything checked out ok so now im thinking my obd1 port isnt working. anyone else had this issue, the dsmlink also has a brand new cable.
  7. Blaze4G63

    BAD fidanza part number?

    I have a 1 g 6 bolt awd and this doesn't look like the correct flywheel. the 3 ears on the outer ring look wrong. All my other flywheels didn't look like this. The box says 161691 and they flywheels says j075464 mit4.8214 and j575464
  8. Blaze4G63

    ECMlink 1G ECMLink connection issues

    So I just got a brand new cable from ECMTuning because my second one broke again and the dam thing wont connect to the ECU.The car starts up and runs fine but it wont connect. The green light on the cable lights up only when I connect the cable to the laptop. I have also try multiple laptops...
  9. Blaze4G63

    Clutch right off floor

    You may have just solved my problem!:rocks: Im Buying a oem as we speak. I hope this is the same case with a 1G
  10. Blaze4G63

    Which clutch [Merged 3-9] what clutch best

    Well I have had alot of issues with my act flywheel, my pedal is right off the floor and i think it was improperly stepped. And if i recall correctly the guy at the machine shop said it cant be turn again because its been turned about 3 times (in my possession) because i had other shops mess it...
  11. Blaze4G63

    Clutch right off floor

    So I got my engine installed and my clutch is right off the floor now. I have sent the pedal assembly to shep and they "repaired it".. but i still feel like theres a little slop in it still, I have a newer master, brand new slave, oem tob, forged clutch fork and an ss line from master to slave...
  12. Blaze4G63

    Which clutch [Merged 3-9] what clutch best

    Are the southbend clutches compatiable with the fidanza flywheel? Ive seen some threads that say dont work together/
  13. Blaze4G63

    2014 Clutch discussion

    I was wondering what is working for everyone into 2014. I got sick of looking up old threads for 2006 and looking at old tech. What is everyone using with there hp they are running along with what you hated and love in the clutch. im looking at buying a new clutch and flywheel because my...
  14. Blaze4G63

    Once again! No pedal

    The ball is not shimmed act2600 with fly but I think fly is stepped wrong
  15. Blaze4G63

    Once again! No pedal

    Ok so I just got my engine back into the car and it started right up after about yrs of sitting. I refreshed the engine with new belts ect. So I get it into the car and the same problem is plaguing me. The only way I can get gears when the car is running is by having the master over adjusted so...
  16. Blaze4G63

    To reuse pressure plate or not to?

    Long story short Im putting my clutch all back together after having swapped an engine and the clutch disk is almost brand new, i know this because I measured the thickness with some brand new digital calipers. Its a act 2600 and it measures 8cm so i know thats good, but the pressure plate seems...
  17. Blaze4G63

    My 1991 Eagle Talon AWD: From the beginning

    Come on Tom we want some details! :D I was shocked when I was searching the marketplace and I seen your 6266 and exhaust mani for sale, and then I said to myself I know that work bench its Toms! So I checked your website and it saw you sold it. Love all the videos man cant wait to see what your...
  18. Blaze4G63

    northwest nightmare

    Well when I did the math he wanted around 4500 with the pistons and rods( ross and mahle) i wanted to use, i even that that price was strange when i was looking at Jackson auto and they were half the price. I even emailed him asking if the price I got was a correct, with comparison to jackson...
  19. Blaze4G63

    northwest nightmare

    More pics as promised. Got a little busy this weekend installing my new garage door opener.:rocks: Man you never know how nice an opener is until you dont have one!Heres a picture of the engine after I swapped everything to this mystery engine:pray:. Cams, turbo, the whole nine.just...
  20. Blaze4G63

    northwest nightmare

    I work for Boeing Fab here in Washingtion state plus I have a GF so we have a pretty good income between the both of us. Also I bought when the housing market was down so I built a brand new home for less then 200k 1800sqft 4 bedroom at an interest rate of 3.5 % when the house was completed I...
  21. Blaze4G63

    northwest nightmare

    Where do I start..... ok so I got into the dsm game back in 2008 with a black 1993 eclipse gs I bought for 400.00 with my hard earned money when I was 15 years old. The car was on craigslist for so cheap because the timing belt was broke. Not knowing exactly what i was getting into i thought i...
  22. Blaze4G63

    Jackson Auto Machine short block

    Does anyone have a short block built by these guys, Im thinking about pulling the trigger on one of there stage 2 blocks. Theres just so many shops these days and I dont really know who to trust. Seems like everyone has a local or favorite builder but I really dont have any experience with any...
  23. Blaze4G63

    What do you think? Should I do it?

    compression numbers dont look bad, could be something simple why its not starting. There are a couple things you need to make an engine run. Air,fuel spark and compression. so you have compression what about fuel and spark? you can get cheap spark testers at any auto store that just plugs into...
  24. Blaze4G63

    What do you think? Should I do it?

    First things, first trust no one. If your serious about buying it take a compression tester with you and do a test on the cylinders. If you got low numbers or one odd out of the four dont bother less you plan on rebuilding the engine completely. Also I can spot two things bad right off the bat...
  25. Blaze4G63

    1G 1G ACT Clutch will not disengage, tried everything!

    I have had the same problems for about a year, I installed a ACT2600 and my pedal is almost right off the floor which I hate, Im going to try to replace with a oem tob and see what happens. I also had a really loose trans mount so Idk if that was the problem but I know that was a facter. Also my...
  26. Blaze4G63

    Cleanest DSM in PACIFIC NORTHWEST! Post your pictures!

    I seen that he had it for sale a little big ago very very clean 1GB! :hellyeah: Glad to see it get to a good home, the 1gs are becoming extinct now days.
  27. Blaze4G63

    raising an engine from the dead

    I have a Free engine from my 1g that I bought about 3 years ago. To make a long story short the guy I bought the car from said the trans was locked up. I never investigated what the real problem was because I had a good trans and engine in my car I got T boned in,all I need was the shell. So...
  28. Blaze4G63

    16g with no shaft play but oil in cold side

    like the title says I was tearing down my engine and I pulled the j pipe and there was oil in the pipe and turbo. But when I check the turbo for shaft play its tight as a banjo string? Can the seals still be bad with no play? The oil never made it to the intercooler just a little bit in the j...
  29. Blaze4G63

    shep stage 2?

    Hey guys I just went onto sheps website and it looks like there dumping the 1g-2g dsm for the GTR. I was wondering what a stage 2 shep trans consis of? Why Im asking is because I bought a stage 2 shep about 3 years ago used and I dont know what the trans is good for now that im going for a...
  30. Blaze4G63

    best 400awhp-500awhp piston/rod combo

    could you guys do ross pistons? Also what is your warranty if any?
  31. Blaze4G63

    help me choose pistons and rods!

    looks like alot of back and fourth, so whats the end factor? no wiescos go with ross or manley? looks like theres give and take on all of them,.
  32. Blaze4G63

    best 400awhp-500awhp piston/rod combo

    Im About to pull the trigger on some pistons and rods for my build, its going to be a 2.0L no stroker, Im looking for a block that can handle 500awhp all day long. I have seen there is a trend of a common set up i was just wonder what is the best for longer lasting race block. I know this is a...
  33. Blaze4G63

    finding the right turbo

    Im most concerned with those items in that order, I havent looked up the specs yet for this but i see most people building engines that are seeing 8k-9k revs. Im sure the heads have to be built because I have hks 272s and I think I remember I cant spin more then 7K or my head will apart (stock)...
  34. Blaze4G63

    finding the right turbo

    Im going to be having an engine built for my 1g awd, and im shooting for a good streetable turbo but can make 500awhp to 600awhp, I was looking at the fp 3065 but I have been looking on fp website and it doesnt seem like the make it anymore .Whats a good turbo for this goal? built 2.0L
  35. Blaze4G63

    looking for engine builder local

    yea i know who im going with, im just waiting on jack to get back to me with a price on parts ect, Thanks to urbansmoker1 :thumb:
  36. Blaze4G63

    front half shafts

    Not concerned with taking any of it off, I was just was wondering, I've pulled the motor out of 4 other Dsms multiple times , I'm no stranger to removing the 4g63.
  37. Blaze4G63

    front half shafts

    I have be working on getting my engine out:rocks: and the last thing I have to do is remove the front shafts, is there any way to remove the half shafts without removing the wheels.
  38. Blaze4G63

    looking for engine builder local

    That be sweet urbansmoker1And yea I don't really want to try to build a bulit bottom end for the first time lol
  39. Blaze4G63

    looking for engine builder local

    im looking to get one of my engines rebuilt locally,Im in puyallup and i dont like the thought of buying a short block from a company 2500 miles away. my guess is if something happens ill be sol. Does any one know or have used any local shops to build a good reliable engine? im just looking for...
  40. Blaze4G63

    What long block to chose for 500whp

    I'm looking to start to build an engine for my 1g. I have a knocking engine right now a spare to build, I don't know what kind of rods or pistons to get for my goal of 500whp, I have 272 cams 720cc injectors mhi 16g Wally 255 fuel lap reg Dsmlink v3 3in turbo back no cats Fmic gm translator and...
  41. Blaze4G63

    Spun bearing and blown turbo.. kinda long.

    bottom line motor is blown no way around it...nothing u can put in the engine is going to fix any of your problems...pull the motor and do a rebuild ...if u try to fix it the way it is u are more likely to ruin the whole engine as a whole block head riockers ect...
  42. Blaze4G63

    Rod knock what do I do?

    its a 420a engine those are a dime a dozen...theres no way to fix with out pulling the engine depending on your budget pull it and rebuild it and spend about 1000-2000 depending on what u buy for parts and assembly...or buy a salvage yard engine and hope its good and not going to start knocking...
  43. Blaze4G63

    BOSS Innovations: Video

    whoooooooot for seeing my car in there at 4:41!! nice video David! i look forward to some tuning as soon as i track down my fuel rail fittings...I always recommend David to everyone that comes to me at my work for dsm parts and service! Great work and customer service is all i have experienced...
  44. Blaze4G63

    **OFFICIAL PNW DSM Sightings Thread!**

    That would have been me !
  45. Blaze4G63

    Bad brand new shep clutch pedal assembly?

    i have been cursed with hydraulic problems!!!!!
  46. Blaze4G63

    Bad brand new shep clutch pedal assembly?

    so i have been experiencing so clutch pedal issues again on my 1G and i just got my clutch pedal assembly rebuilt by shep about 3 months ago. there is play in the pedal and my clutch grabs almost off the floor,its still drivable but i would like to have my clutch more in the middle. i know u can...
  47. Blaze4G63

    WTB 1G fuel rail Fitting -6

    i need one so i can hook my fpr up and drop my 720s in thanks!
  48. Blaze4G63

    Punishment Racing FMIC 1g street kit

    or u could just cit about 3/4 of the center of the crash bar up front and just us the back as support and the lip for the bumper mounts...plasma cuter works great! so does a hack saw....save u some money also
  49. Blaze4G63

    cant boost underload, then sputters at 4500rpm

    a massive exhaust leak was causing this to happen guys thanks anyways! my tubular header has cracked all the way around and the o2 to down pipe also had a leak and couple snapped exhaust studs ..i buttoned it up with a fp manifold/stud kit and it was smooth boostin!
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top