How are guys doing this?

alright well i would connect the laptop.. and with key on it would say engine load 37.0 psiand if i flooor the car(car still off) and reach 100%throttle the engine load would reach 67psi why does it do this? I tested voltage at the clip it is 4.98 should be 5.00v but 4.98v seems fine.. when i...

alright i tried everything i check all fuses, all relays and i have no power to the ecu.. i have aem also so i even tried with that and nothing. for now i have the stock ecu hooked up and im at a lose right now any ideas?? 98 gsx

3in stainless steel tig welded.. took alot of time and measuring ill give u a shot of the engine bay as of right now also..

does anyone have a picture of the starter mounting plate for a 2gen.. im puttin a 6 bolt in my 2gen and i cant seem to figure out ### the starter plate is.. help please...

alright my buddy crashed his evo 9 and is gettin the car back and parting it out imma be taking the brembos and all the hardware.. what do i need to install them on my 98 gsx the whole suspension and everything is out and the car is on jackstands in the garaage since im redoing the whole...

i have the holley 255 and im converting to the ss line up to the rail.. i want to put a inline pump is it worth it or is it worth just sticking with the a1000 or just putting a bosch inline pump in with a 255 intake?

im orderin a new tranny soon. im gonna be doin the lenghtin gears do i have to change the t-case or do anything to the t case if i do that?

what is it suppose to be brand new.. how much is tolerant?

alright right now i have a 7 bolt in my 98 gsx im havin a 6 bolt built right now and then im going to be swapping it in. what do i need to chnage on the electrical side and anything in general. ?

where is the coolant goingg? my oil is not milkyy and im not smoking at all. this has become a headach with this overheating problem.

alrigght so when im cruisin the temp will be alright. when i come to a stop or idle the temp rises all the way uppp. at high rpm the temp gague actauly goes to normal then sooon as the rpms drop the temp starts to rise again. sometimes the heat works sometimes it doesnt. i flushed the cooolants...

ok what i need to know is.. i ordered a set of adjustable came gears for my 7 bolt but now im getting a 6 bolt block. when i order my cams i now have to order it for a 1st gen motor but will the cam gears still work for me.. next is will a 98 tranny fit a 90 block? aka as the 6 bolt block

alright is there any company that sells bushings for the control arms.. i belive mine are shoot. im told that you can see the tire move back and forth like if i were going to launch. and i also just started to get wheeel hop. any help will be usefull.

alright happened to times now. ill be driving normal all of a sudden the check engine light will come on and the car is putter like i took two plug wires off i would let it drop in idle then hit the car and boom its ffine.. any ideas? i chnaged the plugs and wires... help pleasee

alright and another problem.. i had to battery out because i was installing the new goodies such as a 100 shot. ok but now my wipers arent working just the ffronts.. and i keep getting a check engine light from what i can see all the wires and hoses are connected.. is there anything eles that...

ok. soo normaly at WOT. from about 4500 and up full booost. i get a pop like its igniton or fuel cut and then it recovers and pulls hard then sometimes it will do it again. it doesnt do it all the time. i did boost leak test and no leaks. i changed the plugs and put accel 8mm wires on and...

what kit from NOS is a good setup. i want a good 75 or 100 wet shot... im new to nitrous and i dont know what the fogger system and stuff like that it

2g eclipse i want to get rid of the stock maf sensor. i see these things called maf translator and also 3 maf's witch is better.? and do they make an aftermarket map sensor that bolts onto the intake or can i get rid of the map sensor some how?

well this is the car 98 gsx front mount 20g 7:1 compression intake 3in exhaust no cat no muffler stock resonator. 680cc injectors safc dsm link coming soon... tubeular header. dropzone 2in springs. probaly alot of other stuff im forgetting...<a...

ok i searched no luck thou. im gona e picking up a clutch soon its a zoom performance stage 3 clutch. but im told its a pull clutch meaning for it to engage i have to pull the clutch pedal back. whats the differ between the zoom clutch and the act clutch. so confused

i buy a light weight flywheeel and install it myself? i plan on doing a clutch and i figured i do a lightweight flywheeel but i dont know if the motor has to be rebalanced.

alright i was drivin down the road and all of a sudden evrything starts shaking. i pull over check the tires and all evrythin seems fine. i get back in and start to go i come off the clutch and it has nothing. it would roll but had no power reved up like the clutch was slipping but i kno for a...

alright all of a sudden i had this nasty missfire. check engine light came on so i pluged it in and have cyl 4 missfire so i check plugs switch around the plugs and wires and problem still there so im under the hood and i start to wiggle the wires. i get tot he tps and i push the wire and the...

alright i instaled fpr have 680cc injectors with 255 walbro safc controller. my problem is it still runns pig rich at wot. when i turn the pressure down to 20 psi at idle and then attached hose it runs better. but set at 43.5 it runs like garbage... i tested for boost leaks and dident find...

alright i have a 20g turbo i want to get a header. will a t3/t4 header fit this 20g .. the header outlet is the square 4 bolt and the wastegate inlet tha tthe header connects to is sqaure also.. please help asap

just wanted to get another opinion.. last night im drivin home after boosting for a few i let off and start to cruise.. i go to get on it again and all i hea is a whine and no booost. i get home and was pissed.. lol.. i took the intake off and checked for shaft play. in and out there is no...

alright recently my clutch pedal has been acting weird. if im crusin down the highway and go to push clutch the pedal will go right to the floor and barly dissengage the clutch. i would have to pump it up a few times before i can get pressure again. it also does it in the morn and after the car...

alright last night i was driving all of a sudden my lights dim and the horn just goes off. i pull over pop the hood and look at the fuses. the alt fuseible link blew. i also noticed my windows and headlights did not work. when i went to turn my headlights on the horn would go of again . so...

on a 98 gsx . the thottle body is leaking when i did the boost test. now next question is are they orings or seals?

i went to get my inspection. my car did not pass. it said that the cat,egr,and o2 sensor is not ready. so we pluged the car in to see if there is any codes. i had 1 code pending. the code came back as egr malfunction. any ideas on what is wrong with it? or what i can do to fix it.

im lookin at buyin an 99gsx ecu for a guy but how do i tell if i can get the ecu socketed for dsmlink

i fixed some small leaks i had thottle body gasket a hose had a hole in it and 1 line acutaly came dissconnected. but i have 1 more hissiing noise that i here by the intake . my injectors should be here tomorrow so ill know if its injector seals tomorrow. but is there anything eles i should...

lookin for a place on long island to rebuild my fp big 28 and balance. anybody know anybody on the island?

ok i have a 98gsx venolia pistions eagle rods remachinced crankshaft and such. . fpbig28 turbo ingen intake hks catback. stock fuel system. its going in on monday to get the safc controller put in and tuned what do you guys think i will be pushing?

ok i searched. but just did the timing it was off about 2 teeth on the exhaust cam. redid the timing and the motor purs. im out driving around going down the highway all of a sudden the tach goes to zero and the car stalls. im gettin fuel the timing is perfect i changed the plugs. i...

alright i cant figure out this wiring diagram what wires on the ecu do i tap the the mass reading into. my car is running completly rich and will barly rev over 2200rpms.

alright. i just bought a 98 gsx fp big 28 turbo front mount venolia pistons eagle rods. im trying to figure out if the guy changed the fuel injectors. how do i tell if they were changed?

ok im making a custom staight pipe. only question i have is up by the exhaust manifold is it a 2.5in flange or a 3in flange that bolts to the stock exhaust manifold.

as the title says i flushed out the coolant yesterday and theres oil in the coolant and theres coolant in the oil. what do you guys think the leak is comin from.?