The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support Fuel Injector Clinic

Search results for query: *

  1. 420A 1998 N/A Eclipse - Relay clicking, SRS light on - battery light on - tranny problem

    Wow, been a long time since I've been on here but I saw this was one of my last posts so I thought I'd update.The problem I had in the post above was the ECM was shorting out, and what caused it? The O2 sensor wire had some how broken and touched the ground and shorted out the ECM.Not only...
  2. 6 bolt with 2g head

    Just curious, why do you want a 2G head on a 6 bolt? The 1G head is where it's at.
  3. 420A 1998 N/A Eclipse - Relay clicking, SRS light on - battery light on - tranny problem

    I have a 98 NA Eclipse. Tonight while I was driving I hit a bump and the engine just died. I cranked it over and nothing, cranked and cranked and still no fire.So I disconnect the battery and wiggle some wires around the transmission. I reconnect the battery and as soon as I turn the key...
  4. 420A 96 Neon 2.0 short block the same?

    Okay, so we got the swap done. Instead of using the Neon block, I got the engine from a 95 (6/94) Talon. We swapped the entire intake setup with the rail. We had to swap the Crank and Cam position sensor, Oil Sending Unit, and the Coil Pack. We did the entire swap with the transmission still...
  5. 420A 96 Neon 2.0 short block the same?

    Gonna revive this thread for a second. What is the difference between a 95, 96, 97 Eclipse/Talon N/A 2.0L ?I have one here with a big plastic box on the back side of the engine under the intake. It has some lines running to it. Does the 98-99 also have this? I'm wondering about if...
  6. 420A 96 Neon 2.0 short block the same?

    Hey guys, thanks for the responses. I spoke with my dad and he said the engine is from a 96 Neon... I could have sworn it was a 95 4 door.Anyway I think we might take next weekend to pull it apart and do the swap to get things going.
  7. 420A 96 Neon 2.0 short block the same?

    I tried to find something about this but I guess I didn't locate what I want to know.Is the short block the same as the 420a Eclipse?Block, rods, pistons, crank, etc...etc...My buddy has a 420a Eclipse and I have a 2.0 Neon engine and the only main differences I can see so far are the...
  8. Need advice and paint

    R87 = Radiant Fire. You can get it from MANY auto paint locations considering Dodge still uses it to this day. :) Check your local dealer, or even go to an auto body shop and give them the paint code. It is a very common color.
  9. Photshop Please

    I like my bronze one better ;)
  10. Crank/Rod Bearings.. What kind?

    Just so you know... Mahle bought out a little of ACL too, and is working on the rest. And, from reading it looks like the "Race Bearing" offers only .001 more oil clearance than the non race bearing, which could possibly hurt an engine with low oil pressure at idle.Anyway, to each their own...
  11. Crank/Rod Bearings.. What kind?

    I vote Clevite. I have read about clearance issues not being exact with King. (don't shoot me)... I know there are a LOT of King and ACL fans but Clevite has proven itself in NHRA, NASCAR, for some time now.
  12. 2g or 3g lifter?

    You should use newer revised lifters with a bigger oiling hole. Topline makes a good revised lifter. I got my entire set for less then $75 on ebay. BNIB
  13. Do you use a 7-bolt engine?

  14. a cheaper set of oem 97-99 sideskirts, and where to find 2gb rear bumper?

    Salvage yards around here get $40 per bumper, and $15 for side skirts, on ALL cars.
  15. Do you use a 7-bolt engine?

    Some might already know... I'm building a 7bolt 4g64 engine. The block is from either a 98, or 99, Galant, not too sure which because the receipt says 98, the ad for the block when I bought it said 99.Anyway, Wiseco .020 (87mm), 4g64 crank, eagle rods, SBR Stage 6 1G Head, Manley valve train...
  16. a little Photoshop help please

    This is as good as I can do for a few minute job...
  17. 4g63t powered tracker/sidekick?

    Sure, you can put a 4g63 into one, but there would need to be the same amount of work as would be done if putting in a V8. I know someone who has a Geo Metro on a 4x4 frame with a Chevy 350 in it, His myspace profile is set to private so I can't get into the gallery, but here is a tiny ass...
  18. 4g63t powered tracker/sidekick?

    I have a Suzuki X-90, which is sort of like the Sidekick 2door model. It's a wicked little thing, I'd like to put a 4g63/4 in it but there isn't much room.
  19. Holset Turbos, PART 6

    Anyone know if there is a different turbine housing for the H2E series, to do away with this odd stock holset one?
  20. MAPerformance 4g64 powered drag car aka FDSM runs 8.41 @ 161mph

    Nice! I'm sure this has been said already, DOHC, or SOHC?
  21. Stock SIZE 4G64 pistons in 4G63

    You're wrong.Pin height and rod length are the same, with the 4g64 you're adding 12mm of stroke. 6mm at TDC and 6mm at BDC, the 6mm taller deck takes care of the length issue of the longer stroke. Now if you put a 4g64 crank in a 4g63 with the stock rods and pistons you'll have issues, that...
  22. Stock SIZE 4G64 pistons in 4G63

    Hey it's your build, hope it goes well for you.
  23. 4g63 to 4g64 swap

    If I'm not mistaken that link was posted in this thread once before. There are several links to build blogs of the same setup. Thank you though for the post.
  24. 4G64 piston rings

    Well first of all, if you ordered 87mm pistons you're going to need to bore your block as stock it is 86.5mmAs for rings, contact the person you bought the pistons from, or contact the manufacture of the pistons themselves and ask for assistance.
  25. 4G64/G4CS question

    I'd build the stroker or just a 4g64 itself. The 4g64 and 4g63 rods are the same as long as they match the generation. As for the crankshaft I don't know the differences in those two you have.
  26. 4G64 Block & 4G64 DOHC Head

    Any 7 bolt 4g64 will work if you want to go that route. Be cautious that The 2000+ 4g64 in the Eclipse is not the same as prior blocks used in the earlier Eclipse. The same goes for the Galant, they started using a different design on the 4g64 block around 99 or so. I've mentioned it in my...
  27. 2.3L stroker build

    That's kind of a weird thing to say... Any proof on this would be good. And just 1 shop saying so isn't going to work. I've seen 0 issues from anyone using an Eagle crank, regarding oiling.
  28. 2.3L stroker build

    336-475-8277 This guy has a 4g64 crank from a 97 Galant, $80501-945-8880 This guy has a 4g64 crank from a 95 Galant, $100508-921-4444 This guy has a 4g64 engine with 71k miles from a 97 Galant, $200
  29. 4g63 swap into a 98 Spyder GS

    Anyway, I'd use the 4g64 and build it up and use a 1G DOHC head on it.... wait that's what I did. :) You would be surprised by how many 4g64 users out there stick with their own block.
  30. 2.3L stroker build

    The amount of power the rods can handle isn't specifically related to what piston you use. The Eagle HBeam has been proven on many different builds up into 650hp range or more. I'm using Eagle rods on my 2.4L build.
  31. 4g64 questions

    Oil squirters? Yea I don't think I'd do that myself.
  32. Will Megasquirt Work With a 420A/Auto?

    It's not really specific for boost... It's a stand alone ECM designed to work with engines. You can use them on any engine application you want. People ususally use them on their boosted engines due to the fact they can control so much more with them. If you want to use it on a 420a you can...
  33. Will Megasquirt Work With a 420A/Auto?

    umm, you really wouldn't need to use a MegaSquirt for a stock engine. You won't get too much performance out of it, maybe some fuel/spark mods but nothing much.
  34. Will Megasquirt Work With a 420A/Auto?

    Okay, so maybe call Paul at SymTech Labs, or RS Autosport.
  35. [RESOLVED] Balancing Engine ... Brain Fart.

    They should need my bearings too lol.
  36. Who is Dr Turbo?

    I just really fail to see what the name "Dr Turbo" has to do with anything. Does everyone on this forum know you of that name? Did you just one day think "I'm Dr Turbo" ...? I'm kind of lost.
  37. Wrecked the Evo... not even going fast

    Sounds like you were driving too fast for conditions, and if you didn't get a citation for the accident you're lucky.
  38. [RESOLVED] Balancing Engine ... Brain Fart.

    So they will need my OEM Harmonic Balancer when they do the balance on the internals?
  39. Will Megasquirt Work With a 420A/Auto?

    Hmm, good question. Yes you can get a MegaSquirt to communicate with your transmission. I don't know what all you can do with it yet since last I read it was still in BETA Testing. You can contact DIYAutoTune and ask them more specific questions about what you need, or want to do.If you...
  40. 95 AT swap to a MT

    You won't need to worry about the ECU when putting a manual in the car. You might get a CEL from the TCM but that's about it. Just swap the transmission, install the clutch, shifter, and be done with it.
  41. This looks very fun

    That's rather awesome looking.
  42. Stock SIZE 4G64 pistons in 4G63

    4g63 and 4g64 pistons are exactly the same, aside from the bore size. Same height, same pin location, same everything.If you want to make a destroked engine, you should use a 4g64 block and 4g63 crank, and then aftermarket "long rods", with 87mm Wiseco 63/64 pistons. You'll need to bore...
  43. Holset Turbos, PART 6

    Okay, I emailed them. What exhaust manifold do you think I should use with this turbo? Any info about an exhaust housing that will work well with this turbo, but still be usable on a dsm (non-stock) manifold?There really isn't a lot of answers to my question about the H2E.
  44. My setup , think i break 600whp?

    You're not going to have the entire rotating assembly balanced? You have any other mods to build 600whp? Sure the engine might handle 600whp but you can't say your build will just make it... you will have extensive tuning, trial and error, extra mods down the line, etc. It is good to say...
  45. [RESOLVED] Balancing Engine ... Brain Fart.

    Okay, also do I need to take the clutch, pressure plate, and flywheel too?I'm not going to say the machine shop is going to tell me what to bring, I'm sure all machinists are different in their ways of operation even if there is a standard to machining.
  46. [RESOLVED] Balancing Engine ... Brain Fart.

    Hmm, I need to know if I should use the stock harmonic balancer or an after market one then with having this rotating assembly balanced.
  47. Holset Turbos, PART 6

    dsm-onster... Any idea where I can get a turbine wheel+shaft for my H2E, and maybe a rebuild kit? And is the stock compressor wheel, and compressor housing good enough as it is? Also is there a different turbine housing, or what manifold/adapter should I use? I'm not too sure if it's a T6 or...
  48. [RESOLVED] Balancing Engine ... Brain Fart.

    I'm getting ready to have my aftermarket internals balanced. Having this stuff balanced would make it internally balanced right? So do I require a fluid damper/external balancer or not?I am just curious about what all I need to take to the machine shop.
  49. 4g63 to 4g64 swap

    Because several people are messaging me asking how far I am into my build I'll just state here. My build is currently on hold. My funds have gone to shit, I now have custody of my daughter, my wife is a full time student and works PRN (as needed) at her place of employment, and my pay is based...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top