I installed the bigger nozzle today in my aem system. my question is, when installing the check valve into the new nozzle, is there anything that goes between the bronze piece at the end of the spring and the actual nozzle? or should you be able to clearly see the bronze through the nozzle...
So im running an external 044 with a custom in-tank pickup. THIS THING IS SO FRIGGIN LOUD its ridiculous. its louder than every single thing on this car. Im almost positive there is a kink in the main feed line to the pump, but it will still flow just fine. will that affect sound? another thing...
Hey guys, I installed the LC-1 wideband in my car about a month ago with an xd16 gauge. It worked great and I did an open air calibration and everything. I went to start my car today for the first time on this build and it worked for a few mins. I had some issues with starting but once i worked...
Okay so im replacing both of my inner cv boots. One of which I cut to remove motor and the other one had a baby tear. I can't afford the genuine mitsu boots so I bought the Napa ones. Here's the question. The boots are circular. But the ends they go on to has three indentions on it. So the new...
Hey guys. Got a question for ya on what would be my best option. Im upgrading my fuel system. i'm running a 044 inline with a custom in-tank pickup. Because of the bulkhead that is now in the top of my tank assembly for the feed line, the metal part of the return line had to get cut. Now im...
So... I love my dsm with all my heart... BUT I WANNA DRIVE IT OFF A CLIFF RIGHT NOW!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! AGHHHHHHHHHHHHHHHHHHH!!!!!!about a year ago my car jumped timing, bent some valves.....two weeks later it was all back together and running...
Okay guys, got another odd coolant problem. Recently the O ring on my water pipe going into the pump failed. I fixed everything and now I've been having cooling problems. I Run one cooling fan that works fine. I have Link, the fan cuts on a 205 and cuts back off at 180 ish. Drove the car a few...
Just got link v2 (for now).Making some wood.originally knockin all over the place, so i turned the boost down to 10psi.She'll still knock, and i'm a noob. lol.I tried increasing fuel, not any different.Pull some timing maybe?
My oil pump went out. I've been trying to find an article on how to remove it and if there is a way to do it with the motor in the car. I'm just trying to get it back on the road. The car had oil pressure when it broke and it only ran at idle for maybe fifteen seconds. If someone could point...
So i ended up bending a valve when i jumped timing due to a bad tensioner. anyway I'm pulling the motor apart but my father is convinced i have blow by because i have valve cover pressure. I always have oil leaking out of my oil cap. so these are my symptoms, tell me what you think.Boost...
So, I put my car all back togther new head and the such. New turbo and o2 sensor housing. anyway, since i put everything back on, i've noticed my narrowband running all the way lean. The car ran great last night. when i went to start it this morning, it would barely run. i tried new plugs...
Took my head to the machine shop. told them to do Guides, stem seals, re grind valves, re machine head surface, basically a reman head. got it back and all installed works fine. I noticed this morning that if i let the car idle for about 5 mins, it'll start smoking like a champ. and i mean mega...
I bought a new E3 16g. It's a chinabay though.... but for only $125, not bad..... Anyway, got her all installed. She boosted GREAT!!! Great power. only one thing i noticed, the compressor will spin just a tad, not the shaft but the actual compressor housing. weird, but ok i hope. so i went to...
So, I put my car all back together with a new head gasket and new turbo. I hooked everything back up to what they came off of. (I believe). I turn over the car and it will only fire on 1 & 4. 2&3 aren't getting any spark. i checked the wires and the plugs. all good. I took the coils off and...
In the process of hooking everything back up.... where does this hookup connect to? and where does this wire go? i don't remember unhooking it.If you could let me know? The blue wire i hooked up to a wire coming off the CAS. the hookup is just coming out of a harness wire. but it's smaller...
Ok, so i bought a new turbo. The Turbo seals in the 14b went bad. I'm in an odd place right now. I was going to replace the valve stem seals but i dont have a spring compressor. I'm at a place now that i need to get the car done. Should i wait and put the valve seals on? or should i put it back...
so.... had some problems. they progressivly got worse. this is my plan. the 14b was on its last leg. turbo seals were going bad. it finally blew. it would still boost though. when it went, i had some valve stem seals go with it. then a valve cover gasket. im buyin a evo3 16g tommorow. i already...
ok, so i bought this car awhile back. I've done a few boost leak tests from the turbo inlet and air leaks into the CC. so i figure maybe turbo seals, or the car is cold and there is no oil pressure. still boosts fine though. anyway..... moved the BLT to the Licp. No leaks except through the oil...
My car bogs really bad when i have my a/c on. To the point where i don't even wanna drive it with the a/c on. I'm not sure about the fuel pump rewire, but would that have any effect on the a/c? The bogging in my car is crazy compared to any other four cylinder with a/c. My buddy's Honda you...
So, i thought i had some type of seal leak in my turbo(14b). so i took that bad boy off. turns out, the only place where air is leaking out is the oil feed and return, which to my understanding is ok because there is no oil pressure to seal the seals. I fixed a leak in my piping when i pressed...
Sorry if this has been asked over and over and over again. Ive searched some but i'm kinda pressed for time and i need to drive the car. I've got a pic. just please tell me what number hooks to whichever number. or if i even need 3,4 and 5
Ok, so I'm having Creep problems. I've read alot of different things. My Turbo is ported on the wastegate. The guy that had it before me did all of the porting. I've tested my wastegate it all works properly. I'm just getting creep up to like 19psi before i cut fuel cut. It's REALLY really...
Hey Guys, I did a search on why my PS was squealing, didn't really find what i was looking for. According to the search alot of time its a leak. I don't see any leaks anywhere. So what i'm asking is what are some things that would make the PS pump belt squeal. I tightened it and it was no...