I have a BRAND NEW FMIC for a 2g. Looks to be the VRSF model. I want to either sell or trade for a Punishment FMIC. Nothing wrong with this VRSF, reason for wanting PR is because I want to keep my fog lights. Thanks

I have a BRAND NEW FMIC for a 2g. Looks to be the VRSF model. I want to either sell or trade for a Punishment FMIC. Nothing wrong with this VRSF, reason for wanting PR is because I want to keep my fog lights. Thanks

Hello, I just recently encountered an issue with my 95 gsx. As I am driving and I go to make a u-turn I feel a thump type feel/noise and I am not sure what it is. It only does it when I make sharp left-hand u-turns so today I jacked up all four wheels in the air, put into first gear while it is...

Anyone here in jet boats or v drive or desert scene? Just out of curiosity. Wasn't sure if there was anyone else here that does the DSM game and boats and sandrail stuff. Grew up in the desert as a kid so I was always in the dirtbike quad scene my uncles always had their muscle cars and...

Hopefully yall can help me. Im from CA. My little cousin traded his car for a gst from some guy here in CA with no pink slip. Just a bill of sell. The car has Arizona plates on it. Okay here's little info. The guy who my cousin bought it from, he had bought it from Arizona and in the process he...

Anyone of you guys down here going to MOD?? Maybe we can get a caravan going. Usually about 5 dsm's and like 7 evos from here in Bakersfield, we meet up and drive up there together. 1. Deviousgst 2. 3.

Anyone out in Fresno have a spare 7bolt crank that's still good within spec? My buddies motor is at the machine shop due to crank walk, so that crank is done..trying to make it to MOD next month.. please lmk if you or anyone you know might have one. Thanks

hey wats up guys, AND girls, i finally finished my gsx build:hellyeah: but i have some problems, i think i have everything dialed in pretty good, car idles fine except at times, when i hit the 2 step( wanted to see if it worked) it will die out after like the 3rd time doing so, i would have to...

Anyone going this weekend, Sunday Feb 10th to IFO. Its at Famoso in Bakersfield?

Anyone in fresno meeting up saturday? Ima be up there this weekend and was thinking bout driving my dsm up there if anything goes down. Lmk

During my build, i was tearing my block apart to do a bsek when i noticed a bearing chilling in my oil pan. I realized it was my balance shaft. No at first i was like no biggie, im eliminating them anyway. Come to find out the rear bearing (which was the one that spun) had spun the bore way too...

Selling a freshly rebuilt evo3 big16g ..has 6k miles since rebuild. No shaft play whatsoever. Lmk if interested. Need this gone asap...16614440173

Selling a freshly rebuilt evo3 big16g ..has 6k miles since rebuild. No shaft play whatsoever. Lmk if interested. Need this gone asap...16614440173

Anyone from the desert(palmdale,California city, antelope valley) going to MOD 2012 next month on the 14th? Maybe we can meet up somewhere on the hwy 14 and we can all cruise up there..lmk.

im looking for an hx35/40 hybrid OR hx40 only, to complete my build. and id like to keep it dsm flange so id like it to have the BEP housing.. LMk if anyone has one for sale:hellyeah:

im looking for an hx35/40 hybrid OR hx40 to complete my build. and id like to keep it dsm flange so id like it to have the BEP housing.. LMk if anyone has one for sale:hellyeah:

Who is all going? lets get a list going on:hellyeah:... Like 10 of us from bakersfield are going and were leaving bakersfield like at 430-5.Anyone from fresno or around there going? yall can meet with us at my house, i live right off the 99:thumb:

anyone from NorCal going to MOD this year? if so, are you guys coming thru the 99? if so we can meet up here in Bakersfield and all cruise up to MOD together, so far its like 10 dsm's going from here

So who from bakersfield(or anywhere around here, anyone who takes the 99/5) is going to mod in july? So far i know of 6 people going. Were going to meet at my house since most people i know that are going live by/around me and the 99 is 2seconds away lol..lets get a list going to see whos all...

Few parts for sale.. Greddy profec b spec 2 boost controller. New in box.. Evo3 intake manifold Evo9 rims,no curb rash.with tires Greddy electric boost guage(reads bar) Greddy electric egt guage and one peice pillar/trim for the gauges.

Ok so my friend JUST bought a hatch in Rowland heights, we drove 3 hours away, checked car at guys house fired right up ,paid for it, drove down street back fired and shut off, now it won't turn on.. so long story short, anybody live around here that will let us park the car there for a day

Anybody know this color trim code? I'm in the process of painting my engine bay and this is the color im going with, I just can't figure out what the name of color or paint code it is..thanks

Anybody in bako or near bako wanna cruise the dizzums someday? Let me know 6614440173

okay i searched and couldnt really find anything related to my situation.. earlier today when i was trying to remove my motor and transmission, i tried taking my tcase off, but it wouldnt really slide off. it slid off to an extent easy once i took of the bolts but it can only slide so much...

okay so i started my build as of today, i can only do so much because im currently unemployed and dont have the funds to do it all fast, but that's what a project is, taking your time, so bare lol. .im taking my COMPLETELY stock 95 gsx with only 98k miles and building it.. my build consists of a...

Mods, im not sure if i shouldve posted this topic in this thread, so if its not suppose to be here, feel free to move it...im going to start my 95Gsx project soon, completely stock 92k miles.. Already got fp30r,hks272's,pte880's,dsmlink, and all other bolt ons.. Project: full wire tuck, battery...

Mods, im not sure if i shouldve posted this topic in this thread, so if its not suppose to be here, feel free to move it...im going to start my 95Gsx project soon, completely stock 92k miles.. Already got fp30r,hks272's,pte880's,dsmlink, and all other bolt ons.. Project: full wire tuck...

i searched and searched and nothing.. so my problem, im working on my brothers gsx which we couldnt get the idle down under 2000, we found some leaks and got it to 1500k rpms but it wont go any lower. i even put my dsmlink ecu to it and got the sensors to the right voltage and i set the idle to...

Installed a 14b for my buddy today. Looked brand new. He changed from t-25. Anyways . Start it up and notice water leaking. Get under the and see water dripping off the return line. I figured i didnt tighten up the back water line. So i remove the drain line to acess the banjo. As im removing...

On my Gst I had never had an overheating issue. But I just noticed last week and on the way to MOD, my temp needle starts creeping up above normal temp ( the halfway mark) slowly and when it does, I turn my a/c on (in order to kick the a/c fan on) it drops right back to normal temp (halfway...

Im from.bakersfield and ima be out in watsonville/gilroy on july 3-4..just seeing if you guys have any meets there, if so, ill take my car...let me know wats upSent from my DROIDX using Tapatalk

Anyone here in the north-cal Goin to MOD in 2weeks?? Im between socal n northcal and was thinking if couple of you guys are going we can meet up, if not ima go meet with some people in palmdale and that's kinda out my way tho Sent from my DROIDX using Tapatalk

Im parting out a 97 Gsx. Parts left: Doors Hood All windows Sunroof n sunroof motor Window mirrors Might be forgetting some stuff so just ask And most stuff to convert a gst into Gsx...Complete rear subframe with bolts Rear spindles Rear diff(auto)...Let me know if interested ALSO WILLING...

Okay. Im a noob with dsmlink. Just bought it today, the guy didn't really know what he had, he bought the car like is. Anyway I bought the laptop with 2 programs, ecmlink V3.?? And dsmlink v2.5?? And also the ecu that was in his car.Anyway my question is, is this all I need to tune with link...

im having a hard time understanding how to do the injector swap pins at the ecu..my 95gsx isnt getting spark and i swapped everything already, ecu, power transistor, coilpack, timing is good, the only thing i havent done is swap the CAS. But im going with a 1g CAS instead because its an...

i need some help and i tried searching but couldnt really find my answer. i just bought a 95 gsx 2days ago, drove 5hrs to get it drove it back w/o a problem. The next day i was driving it up and down the street, i decided to launch it, once i launched it and went to shift to 2nd it just died...

Okay this just started happening today, only happens when im driving in any gear I rest my foot on my clutch pedel I can feel it vibrate. Its never done that before till today. I've tried backing up the rod n vise versa but still vibrating. I have an act2600 with a street disk. Both have...

i got a quick question.. i've tried searching but cant find anything....i have a greddy profec B ebc. i've had it for a while but never had the silinoid. Today i bought a silinoid for 20 buks brand new.. My question is would the solenoid i bought (greddy profec b 2) work on my greddy profec...

Okay. i searched and searched and done everything possible. this jst started happening about 2weeks ago after i ran my car couple times.. PROBLEM: my boost keeps decreasing as my rpm's go up. I NEVER had this problem. my car always held 20psi all the way pass redline and now it goes to...

i tried searching but couldnt find anything related to my ?.....okay so my motor mount broke. the 2 studs that are mounted onto the right side of motor (motor mount bracket) broke and my question is are those two bolts just studs that are screwed onto the bracket or are they just all one...

my transmission is no good now(i think), it sounds like rod nock..i doubt its my motor. motor sounds good, idles perfect, no check engile light. KNOCK goes away when pressing clutch all the way down. its not TOB. i changed that and put new act clutch. any ideas?.. this all happend when i put an...

i just recently replaced 2 of my broken pintle caps on my 660s. injectors 1 and 4.(i use to get misfire in 4th). but now i keep getting misfire in 3cylinder. i tried everything, coil wires(magnacores) new ngks 7es gapped at .28. i have good compression. runs good no problems at all other than...

mods are hks cams, eb16g, 660cc, safc, wideband.jst ordered my wally 255, and aeromotive afpr. my question is where should i set my fuel pressure. i'm going to be tunning it to about 20psi and a 10.6 ratio. (whats the safest ratio i can do?)

long story short, i got jacked last night for my safc. so i drove it home like that, and i barely made it home(4miles) it kept driving as if my maf sensor was unpluged and if my intercooler wasnt on. i pulled up to my drive way and it started smokin from the engine bay. it looked like it was...

i got my car tuned at churches automotive, and i think they tuned it bad. after like 3k miles on that tune and couple of runs, my pistons rings went out and my pistons melted. i think they tunned me too lean. My question is that, if i turn my boost from 20psi to around 10psi, would i still be...

I just installed my freshly rebuilt motor and hooked up everything, and I rechecked all the vacuum lines and made sure everything is hooked up correctly, but my vacuum still sits at 5 at idle..any ideas?I'm going to go to the hardware store and make me a boost leak tester - any...

I just dropped in my freshly rebuilt motor in: .30 ross racing pistons, eagle h beam rods, cams, rebuilt head. And it started up first try. But my vaccume sits on around 8-5( theres a big leak on the throttle body where the gasket goes..Would this be why?) and theres a small leak on the turbo...

where can i get one, the shop machined my block says he gave it back to me but it was never in the box with all the parts. So now i have to get another one, but i cant seem to find where to get it.. And i dont really wana go to the dealer because they will charge up the a$$, and im low on...

with this set of gasket kit..Im havent really heard of anyone using the Topline Brand set.. EXTREME PSI : Your #1 Source for In Stock Performance Parts - Topline Complete Gasket Set : Mitsubishi Eclipse 90-99