wish i could give more feedback, i did buy a tube bender and notcher from that site but i haven't had a chance to use it due to other stuff in my life right now.

have you checked tricktools.com

yea still is. Its a friend of mines but he went to subarus now. I think he might even part it out. but u would have to call the number in the ad.

mitsubishi eclipse gsxcall JD # in ad.

ok thanks Justin I wasn't even thinking of that because it was a 7 blade. I just wasn't sure if I got played because my compressor housing doesn't look as big or the same as all the other 7blade housing with that v-band outlet on the compressor housing.

I just bought and hx40 on ebay. assembly number is 3595118. guy said it was a 60mm billet wheel. when I finally got it, it did appear to have a 7 blade billet wheel but when I measured it, it was 58.96mm. My question is did the hx 40 actually come with a billet 58mm wheel. I read on the holset...

I want to get a hx40 with a Batmowheel and bullseye t3 .70 a/r . Do I have to buy a super hx40 in order to install that wheel or can I get just any hx40?

Looking to buy a tube bender. I've been checking out stuff tricktools.com and found the Baileigh RDB 050. The first die i plan on getting is 1 5/8" but i dunno what size radius to use. I see they sell a 6" 90 degree radius and the more common 6.5" radius. Also plan on getting 1 1/2" die also...

you could take door lock cylinder to a locksmith and have him rekey it.

from hudson county but my car of course is in the garage waiting on parts. It sucks that the cops mess with ppl so much at the Edgewater meets.

sorry i'm close but don't have a 2g

my car has the ball bearing in it now, because apparently in order to install the awd quaife lsd in it, it's the only way it would fit in 90 fwd trans.

thank you kevin. That's a 1/4mi time i was always wondering for the fwd manual setups.Kevin do you happen to know if that time was done on 24.5" tires or 26". I was just wondering because the honda in my area that run the "sport fwd class" are in the 8 second times. They run 24.5-9-13 and are...

That was with an AUTOMATIC. I asked with a manual.

i want to know. Whats the quickest manual fwd dsm? whether it be 1g or 2g

where on rt 46 links not working for me

kiggly has a one piece front. I've never seen him sell just wider front fenders and big front bumper opening.

i got a miller 140-auto set MIG welder cost me about $800 and just bought a miller dynasty 200dx (TIG) water cooled which cost almost $5k.

if you build it, they will come. what do u think would be the price on it?

Anyone know whats the quickest h-pattern FWD DSM? Honda's got the fwd game on lock, would be nice to see the DSM world giving them comp.

I was looking at holset turbos for sale and came across a company called JM Turbo. It looks like a place that rebuilds turbos or sells their version of them. I'm not sure if it's more of a knockoff turbo site, that probably have cheap CHRA or if their legit. Any insight on these turbos would be...

no problem, glad to help

you should take this car to the track once, just to see what it runs. Even if you get kicked out for not having the car to track regulations.

i would try the junkyard if i were you. Try International Auto Parts in Newark, at Ave P. 973-344-8929. Or there is another company called LKQ

Are you keepin this car NA or converting it turbo? I've still yet to see someone pull off a real all motor build. Welcome to Tuners, good to see people still got love for 1Gs

sounds like a good place for a meet. LOL i haven't been there since like my 8th grade field trip.

i have quaife but in my stock 90 fwd trans. The quaife i bought from extremepsi. It was the awd part #. I know in order to put the diff in, you have too use sealed bearings rather than tapered bearing and also u have change your axle seals , i think, it's been a while. i don't think you can use...

From what i remember, i think he just needs for you to have an eprom. I don't remember if he said he sockets them for you. I met xceleratetune once a couple of years a go in the summer at the Edgewater meets, he was chill to talk to. He tuned his friend's red talon that was pretty quick around...

i agree with the OP. And for people who think the rotaries suck, are crazy. Go to PR, Austrailia, and New Z, you'll see how fast they are. I hate it when people put v8s in rotary powered cars. No doubt i i give people respect for their hard work, but it's just not my cup of tea.

i texted you

starion4g63, Do you also remove the washer in between the side gear and diff housing or do u install a new one? I figured you can't use the old one, because maybe with the heat of the weld it would cause some impurities from the old soaked washer to rise to the top and distort the weld.

It's a nice looking car, but you'll be lucky if you get it sold for $2k. It's kind hard to sell auto DSMs, especially FWDs. A lot of ppl aren't down to swap them to stick. The interior and exterior look in very good condition. Good luck with the sale though. Try posting it on craigslist too.

eveyone's car is always being built slowly, just broke, or it's just that fact that DSMer are all scattered through jersey and never enough in one area.

nah the quickest cars were a vr-4 galant, and a beige talon 1g tan that hit 9.8 i think, but i'm positive they hit 9s. The quickest subaru was a the 2.5rs coupe style that ran 10.33. and the subaru's won i think two of the brackets, can't remember exactly what class. The last run of the day...

i was there and thought it sucked compared to last year's mitsu vs subaru . Last year it was packed with vendors and way more DSMs 1G, 2G, VR4, CSMs. This year it was suppose to be from 10am-7pm, it actually was so bad that it ended at 5PM. The quick 16 was more like the quick 3. I'm just...

i'm also going but not in my DSM. I'm gonna write on a white T my user name. also might be wearing a bright neon yellow greenish T.

just got to e-town tomorrow. You might be a few DSMers there since is Mitsu vs Subaru day.

Like the title states i wondering if anyone makes a three piece front end which has a wider fenders, front bumper, and big opening on the bumper like they make for turbo Hondas. The only person i heard that makes these type of frontend is a guy by the name of JoJo Callos. These are pics of his...

i can't want for that day, hope my car is ready by then.

So do you and husband both have DSMs or is that his in the backround of the pic?

looks like i might be able to make this, sundays and mondays are my days off

well i should be fixing my car this week, so yea maybe next week.

check extremepsi, they have the cruise control delete one, if not then junk yard if you don't want to spend alot.

i went to school in Blairsville, PA that town sux. It's so dead out there.

can a mod delete this thread

well i was installing the 255 walbro fuel pump i got and the damn fuel line kinked and i don't know if it's going to break. So i was wondering if anyone else close to me has a spare 1g FWD fuel pump assembly. Please let me know ASAP. I'm located in West New York, NJ 07093

where did u get that regulator, do u have a part # for it

wow, i felt like i was watching, like a trial version of a clip, come on let us really hear that shit lol

well i'm putting them on a FWD so i figured it would help becuz i spin the shit out of my stock tire. i know for a AWD it might hurt it more if the power isn't up to par but i think in my case i might be alright.

well i just ordered some BFG KDW 2 tires that are gonna be 225/55zr16. Once i get them i'll let you know. The wheel i'm putting them on are close to stock,16 x 6.5 +40 offset. My concern was the height of the tire which come out to like 25.7" for me and i figured if ppl put Hoosier QTP which are...